You are browsing camaro5 
 |
|
02-28-2011, 01:35 AM
|
#1 |
 
Drives: the Camaro as often as possible Join Date: Jul 2009
Location: Kent, WA
Posts: 136
|
How to secure ******** small driver side box
Has anyone figured out a good way to secure the ******** small driver side sub box? Mine stays in place pretty well except during spirited driving ;-) like when braking and making a hard left turn the box tips and smacks the magnet on one of the stock speakers in the back deck then tips back. I want it to stay put!
|
|
|
|
02-28-2011, 03:04 AM
|
#2 |
 Drives: 2011 Camaro 2SS Wht/IOM Stripes Join Date: Aug 2010
Location: Los Angeles CA
Posts: 69
|
Velcro maybe?
|
|
|
|
|
02-28-2011, 04:07 AM
|
#3 | |
     
Drives: 2011 ss camaro Join Date: Aug 2010
Location: spring hill, fl
Posts: 1,705
|
Quote:
 i used it on the speaker en closer and the rear of the amp mount board.
__________________
10/28/2010 got it
|
|
|
|
|
|
02-28-2011, 11:12 AM
|
#4 |
Drives: 2010 Black on Black Join Date: Oct 2010
Location: Houston, TX
Posts: 533
|
Nails
|
|
|
|
|
02-28-2011, 11:37 AM
|
#5 | ||
|
Drives: the Camaro as often as possible Join Date: Jul 2009
Location: Kent, WA
Posts: 136
|
Quote:
Quote:
|
||
|
|
|
|
02-28-2011, 10:41 PM
|
#6 |
|
The wait is over!
Drives: 2010 Camaro, IOM, L99, Auto Join Date: Mar 2010
Location: Washington
Posts: 1,081
|
home depot (i think it was HD) sells 3" wide industrial velcro by the foot, cover as much of the back with it (that touches the OEM carpet) as you can.
another other option is bolt through the floor, inside the enclosure...
__________________
Ordered - 4/17/2010
Delivered - 5/29/2010 AlphaDamp CLD Mat - Get more Sound Deadening with less Sound Deadener |
|
|
|
|
03-01-2011, 05:19 AM
|
#7 |
Drives: 2010 1SS/RS SIM L99 Join Date: Jul 2009
Location: Houston, TX
Posts: 153
|
Not exactly sure how the ******** box is built but you can try the JL Audio method. It is just a little 'L' bracket that bolts to a pre-existing hole in the trunk.
|
|
|
|
|
|
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| DIY: LS3 Camshaft Install (a lot of pictures, may take a moment to load) | robertway | Camaro DIY & HOW-TO instructions & discussions | 313 | 12-16-2023 06:53 PM |
| 2010-11 Camaro ACC LED Side Marker Mods for Turn Signals | GearHeadPeter | Cosmetics and Lighting Modification Discussions | 44 | 03-13-2015 02:25 AM |
| Where we are coming from (check inside) | ljustin293 | 2010 Camaro5 Fest (I) | 106 | 05-12-2010 11:31 PM |
| Camaro 5 Fest Drivers or Spectators | garcmol | 2010 Camaro5 Fest (I) | 427 | 04-23-2010 02:32 PM |
| CLOSED - Driver Signup for the 1st Annual Official Camaro5Fest (April 16-18, 2010) | GTAHVIT | 2010 Camaro5 Fest (I) | 923 | 03-19-2010 11:56 PM |
