Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Rockies / Midwest


Reply
 
Thread Tools
Old 07-07-2017, 09:08 AM   #8681
dreksnot
Served USN - Atomic Chimp
 
dreksnot's Avatar
 
Drives: 2013 Camaro TT LS3
Join Date: Jul 2012
Location: Fort Collins, CO
Posts: 1,092
3rd Annual CCOTR Bandimere Private Track Rental
I am throwing together another 1/4-mile Bandimere strip private rental day for Fri, Sept 29. We'll have the track to ourselves from 9am-3pm, gates open at 8am. If you're interested, let me know and I'll provide you the details, cost, etc.

Last two years has been perfect. Like renting an amusement park for just yourself. No lines to wait in, beautiful weather, and we had 55 cars running our first year and 76 the second. This is the third year running organizing this event. Would like to have at least 60 this year though, so we mostly have someone to run up against in the next lane. It's for the never before, first time racer to the seasoned racer, or someone needing qual runs.
__________________

825WHP / 835WTQ at 13.7psi on E85 10.8sec@129mph DA 7,724ft at 14psi boost on SBE
AGP 56/61 TT | BTR Turbo Stage III cam | AEM TruBoost | n2mb WOT | ID-1000s | NGK BR7EF | DSX Flex Fuel Sensor | LPE
Twin Fuel | KB BAP | Monster LT1-S Triple | 3.25 DSS Proform 9", CF driveshaft, 1400hp axles | Hurst Line Lock | MGW Retro Short Throw w/old skool Hurst T-handle | ADM solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Moreno camber/caster plates
dreksnot is offline   Reply With Quote
Old 07-07-2017, 07:14 PM   #8682
Hulk
 
Hulk's Avatar
 
Drives: 2011 Synenergy Green 2SS/RS
Join Date: Jan 2011
Location: Pueblo, Co
Posts: 466
What are the requirements for tech inspection?
__________________

2011 Synenergy Green 2SS/RS Automatic.Roto Fab, Bo White ported throttle body, GPI rod mod intake, VVT SS3 cam, CNC ported heads, Doug Thoutley tri-y long tube headers, Solo Mach cat back with j pipes. Yank converter, Factory Reproductions Chrome Z28 wheels ect, ect
Hulk is offline   Reply With Quote
Old 07-08-2017, 07:41 PM   #8683
dreksnot
Served USN - Atomic Chimp
 
dreksnot's Avatar
 
Drives: 2013 Camaro TT LS3
Join Date: Jul 2012
Location: Fort Collins, CO
Posts: 1,092
Quote:
Originally Posted by Hulk View Post
What are the requirements for tech inspection?
Usual Bandimere tech. Helmet if fast enough.
__________________

825WHP / 835WTQ at 13.7psi on E85 10.8sec@129mph DA 7,724ft at 14psi boost on SBE
AGP 56/61 TT | BTR Turbo Stage III cam | AEM TruBoost | n2mb WOT | ID-1000s | NGK BR7EF | DSX Flex Fuel Sensor | LPE
Twin Fuel | KB BAP | Monster LT1-S Triple | 3.25 DSS Proform 9", CF driveshaft, 1400hp axles | Hurst Line Lock | MGW Retro Short Throw w/old skool Hurst T-handle | ADM solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Moreno camber/caster plates
dreksnot is offline   Reply With Quote
Old 08-27-2017, 08:48 AM   #8684
dreksnot
Served USN - Atomic Chimp
 
dreksnot's Avatar
 
Drives: 2013 Camaro TT LS3
Join Date: Jul 2012
Location: Fort Collins, CO
Posts: 1,092
Quote:
Originally Posted by dreksnot View Post
3rd Annual CCOTR Bandimere Private Track Rental
I am throwing together another 1/4-mile Bandimere strip private rental day for Fri, Sept 29. We'll have the track to ourselves from 9am-3pm, gates open at 8am. If you're interested, let me know and I'll provide you the details, cost, etc.

Last two years has been perfect. Like renting an amusement park for just yourself. No lines to wait in, beautiful weather, and we had 55 cars running our first year and 76 the second. This is the third year running organizing this event. Would like to have at least 60 this year though, so we mostly have someone to run up against in the next lane. It's for the never before, first time racer to the seasoned racer, or someone needing qual runs.
PAID and RUNNING list is about 3/4 full. Anyone here game?
__________________

825WHP / 835WTQ at 13.7psi on E85 10.8sec@129mph DA 7,724ft at 14psi boost on SBE
AGP 56/61 TT | BTR Turbo Stage III cam | AEM TruBoost | n2mb WOT | ID-1000s | NGK BR7EF | DSX Flex Fuel Sensor | LPE
Twin Fuel | KB BAP | Monster LT1-S Triple | 3.25 DSS Proform 9", CF driveshaft, 1400hp axles | Hurst Line Lock | MGW Retro Short Throw w/old skool Hurst T-handle | ADM solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Moreno camber/caster plates
dreksnot is offline   Reply With Quote
Old 09-29-2017, 11:43 AM   #8685
diablo0730
 
Drives: 2010 Camaro 2SS M6
Join Date: Mar 2014
Location: Fort Carson, CO
Posts: 195
Down in Fort Carson got a 2010 SS. It getting built by Colorado Performance Unlimited right now was going to do LSA but switch to going Turbo at the last minute. After I get it back though goes strait to body shop to fix the hail damage that hit a while back while I was deployed. If anyone has a recommendation let me know.
__________________
2010 2SS/RS built 376ci 9.5:1 compression (Built for Boost) 3.91 Diff, LMR CAI, Speed engineering Headers, TSP Bald Eagle cam 229/242 115LSA, stock heads.

*New plugs and filter*
462rwhp 438ftlbs
diablo0730 is offline   Reply With Quote
Old 11-15-2017, 04:53 PM   #8686
dreksnot
Served USN - Atomic Chimp
 
dreksnot's Avatar
 
Drives: 2013 Camaro TT LS3
Join Date: Jul 2012
Location: Fort Collins, CO
Posts: 1,092
Quote:
Originally Posted by diablo0730 View Post
Down in Fort Carson got a 2010 SS. It getting built by Colorado Performance Unlimited right now was going to do LSA but switch to going Turbo at the last minute. After I get it back though goes strait to body shop to fix the hail damage that hit a while back while I was deployed. If anyone has a recommendation let me know.
So, what did you finally decide on for the power adder?
__________________

825WHP / 835WTQ at 13.7psi on E85 10.8sec@129mph DA 7,724ft at 14psi boost on SBE
AGP 56/61 TT | BTR Turbo Stage III cam | AEM TruBoost | n2mb WOT | ID-1000s | NGK BR7EF | DSX Flex Fuel Sensor | LPE
Twin Fuel | KB BAP | Monster LT1-S Triple | 3.25 DSS Proform 9", CF driveshaft, 1400hp axles | Hurst Line Lock | MGW Retro Short Throw w/old skool Hurst T-handle | ADM solid subframe mounts | Prothane Motor Mounts | Revshift Poly Trans insert | Moreno camber/caster plates
dreksnot is offline   Reply With Quote
Old 01-04-2018, 07:56 AM   #8687
Moreair1

 
Moreair1's Avatar
 
Drives: 2011 ss convertible
Join Date: Jul 2015
Location: Colorado
Posts: 1,190
Diablo are you planning down the line to switch gearing? Or do you have a drag suspension
__________________
Cai intake and a few other mods😎

Last edited by Moreair1; 01-04-2018 at 10:30 AM.
Moreair1 is offline   Reply With Quote
Old 06-23-2018, 03:31 PM   #8688
cornerspeed92


 
cornerspeed92's Avatar
 
Drives: 2013 1SS 1LE
Join Date: Jul 2012
Location: Colorado
Posts: 4,170
Hi Guy's, didn't want to start a new thread for my tire question. I am new to the area and need to know who i can trust mounting my new tires. We are in the Conifer area.
__________________
cornerspeed92 is offline   Reply With Quote
Old 06-25-2018, 11:19 AM   #8689
AG454
I am not "Fast & Furious"
 
AG454's Avatar
 
Drives: 2010 Camaro LSX454 1LE
Join Date: Nov 2008
Location: Greeley Colorado
Posts: 939
Quote:
Originally Posted by cornerspeed92 View Post
Hi Guy's, didn't want to start a new thread for my tire question. I am new to the area and need to know who i can trust mounting my new tires. We are in the Conifer area.
I found a Discount Tire near me in Greeley that has done two sets of gloss black rims and not scratched them. But I have been to other places like Big O that have messed up some other wheels and then denied it. Itís hard to find a place that will take care of your rims. Itís good to go to a place and talk to the manager and see if they have someone who is really good at mounting tires. Offer to tip the guy if he can mount your tires without damage.
__________________
The day I take a bend too fast
Judgement that could be my last
I'll be wiped right off the slate
Don't wait up 'cause I'll be late, I'll be late
AG454 is offline   Reply With Quote
Old 08-08-2018, 01:36 PM   #8690
Moreair1

 
Moreair1's Avatar
 
Drives: 2011 ss convertible
Join Date: Jul 2015
Location: Colorado
Posts: 1,190
2nd it about avoiding big o tire, I'm currently in a battle with them over damaging one of my rims, they said they would repair it but have now had the rim since the 13th, they now said they need 24 more days so I'm just going getting my rim as it is, it has been a nightmare dealing with them
__________________
Cai intake and a few other mods😎
Moreair1 is offline   Reply With Quote
Old 09-02-2018, 11:22 PM   #8691
Moreair1

 
Moreair1's Avatar
 
Drives: 2011 ss convertible
Join Date: Jul 2015
Location: Colorado
Posts: 1,190
Rear diff for sale here in co, if interested please see the link
https://www.camaro5.com/forums/showt...9#post10300769
__________________
Cai intake and a few other mods😎
Moreair1 is offline   Reply With Quote
Reply

Tags
2012 callaway, 45th anniversary, colorado camaro

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Old school members! 4thGenRocks Off-topic Discussions 14 07-06-2010 04:00 PM
For Sale: 2007 Chev Colorado EXT Cab Z71 4X4 bluch Autos For Sale / Wanted 7 06-25-2009 02:03 PM
Check out this web site i found ezlock83 5th Gen Camaro SS LS LT General Discussions 5 03-04-2009 12:44 PM
Voice Your Comments/Suggestions/Input for Focus Group on 2010 Camaro Mr. Wyndham 5th Gen Camaro SS LS LT General Discussions 236 04-22-2008 12:43 AM
# Of Members TAG UR IT Site Related Announcements / Suggestions / Feedback / Questions 25 03-16-2008 11:47 AM


All times are GMT -5. The time now is 02:35 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.