04-20-2018, 01:21 PM | #1 |
Drives: 2013 ZL1 Join Date: Jan 2017
Location: Fort Myers, FL
Posts: 101
|
NGauge questions on analog inputs
I have the NGauge, and got the analog input harness. I have 2 wideband from Innovative and I can’t get the NGauge to show or see them. I can get the analog input to show on the gauge, but it registers 0. I have tested the output with a meter and the output wires are doing their thing. I just can get the analog input to show. I currently have the yellow wires from the wideband, which are the 5volt reference wires hooked to the red and yellow input wires. I have tried with and without ground, still nothing.
|
04-26-2018, 09:20 PM | #2 |
Drives: 2015 Camaro 1LE Join Date: Jun 2016
Location: NJ
Posts: 152
|
Did you check the settings for the analog inputs ?
|
|
|
Thread Tools | |
|
|