07-01-2021, 06:36 PM | #1 |
2002 Camaro V6 T-Top
Drives: 2002 Camaro Join Date: Jun 2021
Location: Vancouver
Posts: 9
|
Subframe Connectors, UMI three point vs BMR
Hi All,
My install is on a 2002 V6 T-Top Camaro. The suspension has lots of mods and is good. I plan on installing subframe connectors. What would be recommended for a good stiff and solid setup... -UMI three point budget point Subframe Connectors. They are bolt-on, but I plan to weld-on after installation, at the shop. -BMR two point weld-on Subframe Connectors. -Anything else that someone would recommend.... |
07-02-2021, 07:42 AM | #2 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,736
|
I've always had good luck with BMR. Never used UMI
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|