Project clutch master cylinder/second gear grind - Page 40 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

z28racer · 06-07-2012, 02:46 PM

Thank you for the fast reply. I will be ordering one in the next couple of weeks. Where can I order it from?

IDEALG · 06-07-2012, 02:50 PM

Quote:

Originally Posted by z28racer

Thank you for the fast reply. I will be ordering one in the next couple of weeks. Where can I order it from?

just use the links at the first page of this thread they tell you what to do.
Thanks

z28racer · 06-07-2012, 02:53 PM

Nope thank you.

RogerBzSS · 06-07-2012, 02:57 PM

Got my Car back from the dealer a few hours ago

and here is what they said

my dealership technicians said my syncro gear pretty much welded to the shaft it was on
they needed to hammer it off to get it replaced, I asked to see the synchro assembly and took it apart for a light inspection, there was blueing on some of the synchro assembly and rings.

new parts installed, with GM trans fluids, "removing the RP Syncromesh" and low and behold it does shift better surely less notchyness from 1 -2, it also floats in to 4th when the skip shift kicks it never ever did that before I was actually supprised, I did jump on it a bit but not a hard pull in to 2nd, but it was a lot better than it was.

June 25th to Jannetty Racing for my other parts, including a Jerry's Master Cylinder..

So I get to drive the car a bit more, I have had it back a few hours but not out on a long drive and time to play hard. so the jury is still out on the replacement parts in the trans for a hard pull 1 - 2 shift IMPO..

Roger

IDEALG · 06-07-2012, 03:12 PM

Quote:

Originally Posted by z28racer

Nope thank you.

here's the link

http://www.camaro5.com/forums/showth...79#post4881079

IDEALG · 06-07-2012, 03:13 PM

Quote:

Originally Posted by RogerBzSS

Got my Car back from the dealer a few hours ago

and here is what they said

my dealership technicians said my syncro gear pretty much welded to the shaft it was on
they needed to hammer it off to get it replaced, I asked to see the synchro assembly and took it apart for a light inspection, there was blueing on some of the synchro assembly and rings.

new parts installed, with GM trans fluids, "removing the RP Syncromesh" and low and behold it does shift better surely less notchyness from 1 -2, it also floats in to 4th when the skip shift kicks it never ever did that before I was actually supprised, I did jump on it a bit but not a hard pull in to 2nd, but it was a lot better than it was.

June 25th to Jannetty Racing for my other parts, including a Jerry's Master Cylinder..

So I get to drive the car a bit more, I have had it back a few hours but not out on a long drive and time to play hard. so the jury is still out on the replacement parts in the trans for a hard pull 1 - 2 shift IMPO..

Roger

Good to hear! keep us updated please

IDEALG · 06-12-2012, 02:27 PM

any updates on installed master cylinders?

R8cerX · 06-12-2012, 03:14 PM

Quote:

Originally Posted by IDEALG

any updates on installed master cylinders?

Just installed mine. Clutch pedal not sinking anymore and engages higher like it's supposed to. Will test the 1-2 shift on the way home. Installing a remote resevoir tomorrow...will post pics.

IDEALG · 06-12-2012, 03:49 PM

Quote:

Originally Posted by R8cerX

Just installed mine. Clutch pedal not sinking anymore and engages higher like it's supposed to. Will test the 1-2 shift on the way home. Installing a remote resevoir tomorrow...will post pics.

cool

piticu667 · 06-13-2012, 12:03 AM

Quote:

Originally Posted by IDEALG

any updates on installed master cylinders?

Mine still works like a charm.. Thanks again.

2012-2SS · 06-13-2012, 12:43 AM

My car is going to the dealer in 2 weeks to have the clutch pedal assembly changed out and a new clutch installed. If my pedal still sticks and/or grinds 2nd I'll definitely be giving you a call for a master cylinder.

Sent from my Nexus S 4G using Tapatalk 2

ramon · 06-13-2012, 05:23 AM

Please PM for Price... appreciate it!

R8cerX · 06-13-2012, 08:03 AM

Got up this AM and the clutch pedal did not drop at all...has great pressure feel to it. I am installing a clutch resevoir today and a clutch pedal stop. Will post pics when done. I would highly recommend this master cylinder to anyone with a "stick" car.

IDEALG · 06-13-2012, 11:52 AM

Quote:

Originally Posted by R8cerX

Got up this AM and the clutch pedal did not drop at all...has great pressure feel to it. I am installing a clutch resevoir today and a clutch pedal stop. Will post pics when done. I would highly recommend this master cylinder to anyone with a "stick" car.

Good to hear, keep us posted on how it is after you drive it a bit. Thanks

View Poll Results: if you definitely want a cylinder please chose V6 or SS. need to figure out how many
I own a V6	20	20.83%
I own a V6 but will wait for a core exchange	7	7.29%
I own a SS	50	52.08%
I own a SS but will wait for a core exchange	21	21.88%
Multiple Choice Poll. Voters: 96. You may not vote on this poll

06-12-2012, 02:27 PM	#553
IDEALG Chevy's "Rumble" Best! Drives: 2015 ZL1 6 speed Join Date: Feb 2011 Location: Ideal Garage aka (Grayskull) Fords, nj Posts: 4,458 View My Garage	any updates on installed master cylinders? __________________

06-13-2012, 12:43 AM	#557
2012-2SS Drives: 2012 Camaro 2SS/RS Join Date: Dec 2011 Location: Dover, NH Posts: 678	My car is going to the dealer in 2 weeks to have the clutch pedal assembly changed out and a new clutch installed. If my pedal still sticks and/or grinds 2nd I'll definitely be giving you a call for a master cylinder. Sent from my Nexus S 4G using Tapatalk 2 __________________ 2012 Camaro 2SS/RS, Hurst Short Throw, IdealG M/C, Pypes Pipe Bomb, LSR Cold Air Intake, LSR Toe Links/Lower Control Arms Clear Image headers, high flows, Slowhawk tune 1974 Chevy K10 Built 355, FAST EZ EFI, 5speed 2000 Chevy Tahoe LT 5.3L, Slowhawk tune

06-13-2012, 08:03 AM	#559
R8cerX Drives: 2010 CamaroSS Join Date: Aug 2009 Location: Burlington NC Posts: 217	Got up this AM and the clutch pedal did not drop at all...has great pressure feel to it. I am installing a clutch resevoir today and a clutch pedal stop. Will post pics when done. I would highly recommend this master cylinder to anyone with a "stick" car. __________________ Frank 10 Camaro Magnacharged- 585rwhp/585rwtq, full exhaust, Pedders Justice/ZL1 sway, Stoptech brakes and 21" 3 Pc. Forgeline wheels 99 Corvette- 502rwhp/460rwtq-402 N/A, 6pis/4pis brakes...fun track car

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear End Gears 101	danhr	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	92	06-02-2021 04:17 AM
2nd gear grind issue and updated GM parts (pics)	Oxtar41	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	67	03-04-2015 10:11 PM
GTO Clutch Reservoir Install	terry_b	Camaro DIY & HOW-TO instructions & discussions	68	06-13-2014 07:46 PM
V6 AY6 M6 2nd Gear Problem - Report Your Issue Here	CAMAR0	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	1606	10-25-2012 03:18 PM
Street Slayer brought to you by Hendrix Engineering	Hendrix-Engineering	Transmission / Driveline	2	12-08-2011 02:55 PM

06-07-2012, 02:46 PM	#547
z28racer Drives: 12 SIM 2SS/ RS Sinergy M6,GMC2500HD Join Date: Jan 2012 Location: San Diego, California Posts: 1,596 View My Garage	Thank you for the fast reply. I will be ordering one in the next couple of weeks. Where can I order it from?

06-07-2012, 02:53 PM	#549
z28racer Drives: 12 SIM 2SS/ RS Sinergy M6,GMC2500HD Join Date: Jan 2012 Location: San Diego, California Posts: 1,596 View My Garage	Nope thank you.

06-07-2012, 02:57 PM	#550
RogerBzSS Drives: 11 IBM n White 2SS/RS M6 Join Date: May 2011 Location: Tewksbury Ma Posts: 358 View My Garage	Got my Car back from the dealer a few hours ago and here is what they said my dealership technicians said my syncro gear pretty much welded to the shaft it was on they needed to hammer it off to get it replaced, I asked to see the synchro assembly and took it apart for a light inspection, there was blueing on some of the synchro assembly and rings. new parts installed, with GM trans fluids, "removing the RP Syncromesh" and low and behold it does shift better surely less notchyness from 1 -2, it also floats in to 4th when the skip shift kicks it never ever did that before I was actually supprised, I did jump on it a bit but not a hard pull in to 2nd, but it was a lot better than it was. June 25th to Jannetty Racing for my other parts, including a Jerry's Master Cylinder.. So I get to drive the car a bit more, I have had it back a few hours but not out on a long drive and time to play hard. so the jury is still out on the replacement parts in the trans for a hard pull 1 - 2 shift IMPO.. Roger

06-13-2012, 05:23 AM	#558
ramon Lightnin Drives: Victory Red 2SS Black interior Join Date: Apr 2010 Location: Georgia Posts: 19 View My Garage	Please PM for Price... appreciate it!