Modern07 - 2013 Summit White ZL1 [COTW 6/9/14] - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

*mlee* · 01-29-2013, 11:19 PM

Quote:

Originally Posted by Modern07

Added 2 Aeroforce Interceptors with ZL1 faceplates to the A Pillar today - hooked up to the OBDII Port - these things are awesome and can scan absolutely loads - I have also programmed in the shift lights

Very nice... I've had this one on the back burner for a while. Glad you're happy with it.

Modern07 · 01-29-2013, 11:35 PM

Quote:

Originally Posted by mlee

Very nice... I've had this one on the back burner for a while. Glad you're happy with it.

Thanks - I'd seen them a while back after somebody had installed but never followed through, and then there was a thread a few weeks ago posted that brought them back into my thinking again.. it makes it a lot easier to see the Boost now that's for sure!

And I will add the input for AFR eventually too once I start adding more power and need to keep a closer eye on it.

Got some more Engine Bay Stuff on the way too - it's an expensive habit this mod thing!!

Behic2320 · 01-30-2013, 11:08 AM

This is one bad ass camaro my man, you are one lucky guy

Modern07 · 01-30-2013, 12:33 PM

Quote:

Originally Posted by Behic2320

This is one bad ass camaro my man, you are one lucky guy

Thanks

- and I am indeed!

lscamaro · 01-30-2013, 12:56 PM

Have you thought of maybe painting the zl1 badges like you did the one on the strut tower brace? I think it would look amazing!

Chevyman2 · 01-30-2013, 01:05 PM

Quote:

Originally Posted by Modern07

Thanks

- and I am indeed!

I have to agree sweet ride...." That's the car I want when I grow up"

hightower · 01-30-2013, 01:09 PM

Badass ride! Exactly how I would order a ZL1 if I ever did!!! And excellent mods you've picked as well!

Engine bay looks 2039840984029845098594308593858340589 times better!!!

Modern07 · 01-30-2013, 08:57 PM

Thanks All

I'm not finished with the cosmetic mods yet, still got a few ideas I'm playing around with

Also installed a Mild to Wild switch and have it programmed into the homelink buttons.

As for the ZL1 badges and the Camaro Badges - I'm still thinking about what to do with those - depending on which direction I go will determine how I change them out - but they will be changed eventually

SSmokinSS · 01-30-2013, 11:46 PM

Looking sweet! No doubt what trim level it is!

Modern07 · 02-16-2013, 11:47 AM

So I had it on the Dyno today - 526rwhp and 510ft/lbs Torque

Modern07 · 03-09-2013, 07:40 PM

Added a few bits and pieces over the last few weeks.

Some Showstopper items which I love:

Also had Lupe paint me some Strut Brace Bolts white as the silver ones just didn't look right with the black and white theme I have going on

Then I bought a wire harness cover from Billet Custom:

Also added some Ceramic Brake Pads to try to cut down on the level of Dust:

After that decided I wanted to add a little bit of light under the hood for whenever I have the car at a show after dark - nothing too much just a strip under the strut brace.

This is wired to a switch mounted to the back of the fuse box so very hidden:

Jferrell88 · 03-19-2013, 08:41 PM

your car is sick you just became my inspiration

Modern07 · 03-19-2013, 09:01 PM

Quote:

Originally Posted by Jferrell88

your car is sick you just became my inspiration

Thanks!!

That means a lot to me

If you have any questions on anything just let me know and I'll be happy to help

Modern07 · 03-22-2013, 08:23 PM

So - followed the lead of loads of others on here and Flocked my A Pillar Pod.

Once flocked sprayed it with some Black Fabric spray to make it darker to match the interior a little better (It was much lighter originally)

Very happy with the result - way better than the black plastic look.

Also flocked my passenger side A Pillar

01-30-2013, 11:08 AM	#17
Behic2320 SoCal HT5 COTW 4/21/13 Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011 Location: Sandy Eggo Posts: 3,047	This is one bad ass camaro my man, you are one lucky guy __________________

01-30-2013, 12:56 PM	#19
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Have you thought of maybe painting the zl1 badges like you did the one on the strut tower brace? I think it would look amazing! __________________ Click Picture for Build Thread

01-30-2013, 01:09 PM	#21
hightower LS3 Black Widow Drives: 2012 45th 2SS LS3 and 1968 Mustang Join Date: Nov 2011 Location: Madison, GA Posts: 4,557	Badass ride! Exactly how I would order a ZL1 if I ever did!!! And excellent mods you've picked as well! Engine bay looks 2039840984029845098594308593858340589 times better!!! __________________ My Camaro Story

01-30-2013, 11:46 PM	#23
SSmokinSS Get Some Drives: 2014 ZL1 6Speed Join Date: Mar 2012 Location: The Wood's Edge, NM Posts: 712	Looking sweet! No doubt what trim level it is! __________________ BUILD THREAD

02-16-2013, 11:47 AM	#24
Modern07 Mid-Florida Camaro Club Drives: 2019 ZL1 on Order Join Date: Jan 2011 Location: Heathrow, FL Posts: 3,136	So I had it on the Dyno today - 526rwhp and 510ft/lbs Torque __________________ My Build Thread Last edited by Modern07; 02-17-2013 at 08:01 PM.

01-30-2013, 08:57 PM	#22
Modern07 Mid-Florida Camaro Club Drives: 2019 ZL1 on Order Join Date: Jan 2011 Location: Heathrow, FL Posts: 3,136	Thanks All I'm not finished with the cosmetic mods yet, still got a few ideas I'm playing around with Also installed a Mild to Wild switch and have it programmed into the homelink buttons. As for the ZL1 badges and the Camaro Badges - I'm still thinking about what to do with those - depending on which direction I go will determine how I change them out - but they will be changed eventually

03-09-2013, 07:40 PM	#25
Modern07 Mid-Florida Camaro Club Drives: 2019 ZL1 on Order Join Date: Jan 2011 Location: Heathrow, FL Posts: 3,136	Added a few bits and pieces over the last few weeks. Some Showstopper items which I love: Also had Lupe paint me some Strut Brace Bolts white as the silver ones just didn't look right with the black and white theme I have going on Then I bought a wire harness cover from Billet Custom: Also added some Ceramic Brake Pads to try to cut down on the level of Dust: After that decided I wanted to add a little bit of light under the hood for whenever I have the car at a show after dark - nothing too much just a strip under the strut brace. This is wired to a switch mounted to the back of the fuse box so very hidden: __________________ My Build Thread

03-19-2013, 08:41 PM	#26
Jferrell88 Drives: black 2ss/rs Join Date: Oct 2008 Location: Proctorville, OH Posts: 751 View My Garage	your car is sick you just became my inspiration __________________

03-22-2013, 08:23 PM	#28
Modern07 Mid-Florida Camaro Club Drives: 2019 ZL1 on Order Join Date: Jan 2011 Location: Heathrow, FL Posts: 3,136	So - followed the lead of loads of others on here and Flocked my A Pillar Pod. Once flocked sprayed it with some Black Fabric spray to make it darker to match the interior a little better (It was much lighter originally) Very happy with the result - way better than the black plastic look. Also flocked my passenger side A Pillar __________________ My Build Thread