08-21-2013, 12:52 AM | #1 |
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
Help!!! Lowering spring question
My lower strut is not meeting we're my break caliper is and I am just stumped why its not aligning up right! I will try to upload pictures of what I mean.
__________________
SoFlo Muscle Car Group
Miami/Broward |
08-21-2013, 01:00 AM | #2 |
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
__________________
SoFlo Muscle Car Group
Miami/Broward |
08-21-2013, 01:03 AM | #3 |
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
__________________
SoFlo Muscle Car Group
Miami/Broward |
08-21-2013, 02:00 AM | #4 |
Drives: Camaro SS/RS inferno red interior Join Date: Mar 2012
Location: Pompano Beach FL
Posts: 817
|
I should say its my lower control arm that's not aligning right
Sorry
__________________
SoFlo Muscle Car Group
Miami/Broward |
08-21-2013, 08:35 AM | #5 |
Drives: Race Car Join Date: Sep 2009
Location: Seffner, FL
Posts: 6,226
|
That particular mounting point utilizes a rose joint in the spindle so it takes a little work and messing around to get it to line up.
|
08-21-2013, 11:33 AM | #6 |
The Mark of Excellence
Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009
Location: Smallest State in the Union
Posts: 8,690
|
Just wiggle and diddle, it should go right in.
__________________
BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein |
08-21-2013, 01:28 PM | #7 |
Drives: '69 SS Convertible Join Date: May 2009
Location: DFW, TX
Posts: 7,111
|
Use a pry bar to get it moved where it needs to be.
__________________
-2010 Camaro 2SS | M6 | VR w/White Stripes | 1 3/4" KOOKS - 3" Magnaflow | LPE 3.91 gears | ADM tuned | Halltech w/ADM Scoop | Spohn/BMR Trailing Arm/Toe Rod | BC Coilovers| Pedders FE4 ZL1 swaybars | Cradle/Diff/Radius Rod bushings | VMax TB | Morimoto Projectors | MGW shifter | Red Calipers
Build Journal |
08-22-2013, 12:03 PM | #8 |
Drives: 2011 Camaro SS/ 2016 Camaro SS Join Date: Jun 2009
Location: Sandy, Utah
Posts: 3,256
|
You just need to pull the spindle out and move it into place. It can be a PITA sometime.
Kind regards, Jordan Priestley 888.308.6007 |
|
|
|
|