02-17-2016, 09:01 AM | #29 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
Well over the winter I got lots of new stuff to put on the car once it gets warmer out. To start I got poly Engine mounts, Trans mount, Hendrix offset differential bushing, and BMR rear cradle bushing. Zl1 petal covers because I can see metal on my clutch and brake petals. new floor mats and a trunk mat.
Last edited by cz2815; 02-21-2016 at 03:20 AM. |
02-21-2016, 03:03 AM | #30 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
I picked up SLP 25% underdrive pulley, hopefully it will save my a/c belt from being chewed up again. The install was pretty easy took less then a hour. Nicer looking then the stock one also.
|
02-21-2016, 03:19 AM | #31 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
So I bought the Holley Hi-Ram intake and plan on polishing it before I put it on.
Also got Seibon COPO style carbon fiber hood, Quik Latch push button billet hood pins, ZL1 side skirts, front lip spoiler, ACS rear bumper side extensions, drilled and slotted rotors and BMR 1.4" lowering springs. |
02-21-2016, 03:41 AM | #32 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
While I was at it also got new tires and some paint for the rims. I am in the process of painting the rear rims now while I still have the snow tires on. Here is a little preview of the rims. At the same time I am trying to get everything polished up here is some of the stuff I am working on.
|
03-21-2016, 06:17 PM | #33 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
Got the rear rims done had some problems with the black i'm going to reclear them when I get a chance, still got to do the front rims.
|
03-21-2016, 06:32 PM | #34 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
Weather started to get better so I installed the hood and hood pins. Once I had the clearance from the new hood I put the new intake on and new caps. I also had just finished painting ground effects so I installed them as well. I still need to repolish the water pump pulley and clean the engine bay.
|
03-21-2016, 08:25 PM | #35 |
BMBLBLU
Drives: Aqua Blue Metallic 2010 Camaro 1ss Join Date: Jul 2010
Location: maryland
Posts: 311
|
That looks nasty!!!!!!!!!!!!!!!
Steve
__________________
|
03-25-2016, 09:36 PM | #36 |
Drives: 2014 Camaro 2LT Deep Magenta Join Date: Apr 2015
Location: Oklahoma
Posts: 367
|
Man, this camaro screams "gtfo out my way peasants. Nice job omg.
|
04-17-2016, 04:45 AM | #37 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
thanks a lot sorry I haven't been on here much lately.
|
04-17-2016, 05:00 AM | #38 |
CZ2815
Drives: 2011 camaro ss Join Date: Oct 2013
Location: fords nj
Posts: 38
|
Well I painted the orange part of the front rims, painted the water pump pulley black because it keeps getting rusty on me after I clear it. Put my new petals on and floor mats, also put the trunk carpet in.
|
04-22-2016, 06:46 PM | #39 | |
Drives: 2011 camaro 2LT Join Date: Nov 2012
Location: Roselle, il
Posts: 158
|
Quote:
__________________
|
|
|
|
|
|