09-25-2012, 12:03 PM | #1 |
DIY side camera
Hi guys,
I am not sure if this particular setup has been done before. I tried to search but couldn't see this variance. Here is a quick write up on my camera setup. I only prototype one side for now. It works great for what i need for somewhat little money. I will add one more on the other side and the front. The camera view can be switch easily using a remote control switch. Goal: I would like a camera system to park in tight space and next to high front or side curve. It will also serve the purpose for blind spots while driving on the right side. Parts" I don't want something that too obstructing while not use. This will not draw much attention when it in the folded down state. As for the cameras, I want something small with metal casing. This will prevent damaging from gravel etc. 1 x 3.5" LCD folding screen - 28 dollars 2 x backup camera (left side and right side) 12 dollars each 1 x front facing camera 19 dollars each Parts pictures: I ran the camera cable above the wheel well cover across the hood and into through the firewall. There is a hole on the driver side so you don't need to drill (Thanks to the posts in this forum). Since i want this to be on all the time when i drive, tabbed into the lighter outlet. Here is the working pictures: Last edited by wabibito; 09-25-2012 at 04:44 PM. |
|
09-25-2012, 03:37 PM | #2 |
Drives: 2010 Camaro SS/RS Black Join Date: Jul 2011
Location: Panama City Beach, FL
Posts: 41
|
Where did you buy this setup?
__________________
2010 SS/RS Corsa Cat Back Exhaust Injen Cold Ait Intake All Black Scarallos DriftR Wheels Front 20X10 275/40ZR20 - Rear 20x11 315/35ZR20 |
09-25-2012, 04:01 PM | #3 |
460 RWHP 420 RWTQ
|
great job...
__________________
|
09-25-2012, 04:15 PM | #4 |
I bought everything from ebay.
|
|
09-25-2012, 04:32 PM | #5 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
The lighter outlet (12V outlet - whatever you want to call it) isn't on all the time. It turns on when the accessories are turned on. At least that how it was on my and 2010 and now with my 2011.
This is really cool though. Have any pics of how you set up the screen? Edit - should have waited for it to finish loading. Looks good |
09-25-2012, 04:41 PM | #6 | |
Quote:
|
||
09-25-2012, 04:42 PM | #7 |
off the subjet...but how do I start a new thread??? UGH!!!
|
|
09-25-2012, 04:43 PM | #8 |
09-25-2012, 04:44 PM | #9 |
the only place i see that is in the vendor area...hmmm Ill go check some more thanks
|
|
09-25-2012, 04:49 PM | #10 |
it's hers...
Drives: 2011 Camaro 2SS/RS Convertible Join Date: Jun 2012
Location: katy, tx
Posts: 1,202
|
very cool. this will start the DIY wheels for many.
|
09-25-2012, 05:12 PM | #11 |
SoCal Mayhem
Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008
Location: Foothill Ranch, CA
Posts: 5,488
|
__________________
|
09-25-2012, 05:18 PM | #12 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Gotcha
|
09-25-2012, 05:52 PM | #13 |
not worried about the camera getting damage by debris or water?
|
|
09-25-2012, 05:56 PM | #14 |
The camera suppose to we weather proof and metal casing. If it last more than one year, I am happy since it is only 12 dollars.
__________________
Life is twisted... Everyone should have a sport car...
|
|
|
|
Tags |
camera, lcd |
|
|