1LE wheel offset? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

321 CYA · 04-29-2013, 11:36 AM

What is the 1LE wheel off set? and they are both 20x10 correct?
Thanks for the help. Trying to get a square setup on my SS.
Thanks

Phdpsy · 04-29-2013, 11:53 AM

1LE are 20x10 And 20x11 exactly as ZL1...just with 285s all around. If you want a true square set up, try something like TSW Nurburging 20x10 et35. Can run 285s (and some 295s) all around and rotate as needed for better tire life. Can't rotate the 1LE/ZL1 set ups.

Southern Comfort · 04-29-2013, 11:57 AM

Keep in mind the 1LE rear wheels wont fit the on the front. They contact the struts.
You could get square with 4 1LE fronts.

gajagfan · 04-29-2013, 12:08 PM

Not sure of the offset, but the front wheels are 10" and the rears are 11". I also know that the 11" wheel does not fit on the front. The tires are the same on all 4 wheels (285/35/20's).

JDP Sales · 04-29-2013, 12:13 PM

** EDIT +23 up front and +43 in the rear.

Best regards,

Tyler
888-308-6007

321 CYA · 04-29-2013, 12:22 PM

Thanks everyone this is the info I have been looking for!
Thanks again!

321 CYA · 04-29-2013, 12:25 PM

Tyler what it the web page that has this offset comparison on?

JDP Sales · 04-29-2013, 12:30 PM

I found that on this site in a search, so I am not sure.

Best regards,

Tyler
888-308-6007

321 CYA · 04-29-2013, 12:32 PM

Quote:

Originally Posted by Sales@JDP

I found that on this site in a search, so I am not sure.

Best regards,

Tyler
888-308-6007

Thanks I found it!

flht99b · 04-29-2013, 12:35 PM

Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.

NinoSS · 04-29-2013, 12:49 PM

Quote:

Originally Posted by flht99b

Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.

He is correct... See pics (my wheels) below...

Front

Rear

NinoSS · 04-29-2013, 12:52 PM

I have pics of them on a digital scale too...

JDP Sales · 04-29-2013, 01:29 PM

Quote:

Originally Posted by flht99b

Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.

Thank you for the correction! Good to know.

Best regards,

Tyler
888-308-6007

GT09OK · 06-17-2013, 08:11 PM

Will a 19x9.5 backspacing 42mm fit on a 2013 1le camaro and clear brakes and all?

04-29-2013, 11:36 AM	#1
321 CYA Drives: 2013 Rally Yellow Camaro 2SS/RS Join Date: Apr 2013 Location: Central, PA Posts: 59	1LE wheel offset? What is the 1LE wheel off set? and they are both 20x10 correct? Thanks for the help. Trying to get a square setup on my SS. Thanks

04-29-2013, 12:13 PM	#5
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	** EDIT +23 up front and +43 in the rear. Best regards, Tyler 888-308-6007 Last edited by JDP Sales; 04-29-2013 at 01:30 PM.

04-29-2013, 12:35 PM	#10
flht99b Drives: 2010 Camaro 2SS/RS RJT Join Date: May 2009 Location: Knoxville Posts: 1,574 View My Garage	Actually the ZL-1 and 1LE offsets are as follows: 20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm 20x11 rears offset +43mm GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE. If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive. Ed M. __________________ RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, ZLI calipers, rotors & pads, BMR Trailing & Toe Arms, rear cradle & diff bushes, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, GTO clutch reservoir, LS9 cam, Comp valve springs, Melling 10296 oil pump, CR5 timing chain, LS6 damper, CAI Cold Air Intake, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9.5 & 20x11 DS3 whls, 275/40/20 & 315/35/20 tires, 2011 Convertible spoiler, 1LE front spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, wrapped console & Grant steering wheel.

04-29-2013, 12:52 PM	#12
NinoSS Drives: 2SS/RS CGM LS3 Join Date: Aug 2009 Location: NJ Posts: 1,619	I have pics of them on a digital scale too... __________________ Current - 2018 NGM 1LE (LT4 conversion coming soon) SOLD 2010 LS3 / Vengeance stage I cam / CAI intake w/ADM race scoop / Dynatech LT's / Eaton Posi LPE-JRE 3.91's / L99 Corsa / ZL1 wheels / NT05 275/315

04-29-2013, 11:53 AM	#2
Phdpsy Drives: SW 2013 1LE Join Date: Jan 2013 Location: Louisiana Posts: 126	1LE are 20x10 And 20x11 exactly as ZL1...just with 285s all around. If you want a true square set up, try something like TSW Nurburging 20x10 et35. Can run 285s (and some 295s) all around and rotate as needed for better tire life. Can't rotate the 1LE/ZL1 set ups.

04-29-2013, 11:57 AM	#3
Southern Comfort No Tags/Habitual Violator Drives: 2012 SIM 2SS/RS & z71 Join Date: Sep 2011 Location: North Georgia Posts: 2,379 View My Garage	Keep in mind the 1LE rear wheels wont fit the on the front. They contact the struts. You could get square with 4 1LE fronts.

04-29-2013, 12:08 PM	#4
gajagfan Drives: 2013 1SS 1LE Black - Std Exhaust Join Date: Mar 2013 Location: Brunswick, GA Posts: 3,622 View My Garage	Not sure of the offset, but the front wheels are 10" and the rears are 11". I also know that the 11" wheel does not fit on the front. The tires are the same on all 4 wheels (285/35/20's).

04-29-2013, 12:22 PM	#6
321 CYA Drives: 2013 Rally Yellow Camaro 2SS/RS Join Date: Apr 2013 Location: Central, PA Posts: 59	Thanks everyone this is the info I have been looking for! Thanks again!

04-29-2013, 12:25 PM	#7
321 CYA Drives: 2013 Rally Yellow Camaro 2SS/RS Join Date: Apr 2013 Location: Central, PA Posts: 59	Tyler what it the web page that has this offset comparison on?

04-29-2013, 12:30 PM	#8
JDP Sales Drives: Chevys at the limit Join Date: Nov 2010 Location: SLC, UT Posts: 9,621	I found that on this site in a search, so I am not sure. Best regards, Tyler 888-308-6007

06-17-2013, 08:11 PM	#14
GT09OK Drives: 09 G8GT Join Date: May 2013 Location: oklahoma Posts: 22	Will a 19x9.5 backspacing 42mm fit on a 2013 1le camaro and clear brakes and all?