12-08-2013, 10:34 AM | #1 |
Drives: 2010 rs/ss a6 Join Date: Sep 2011
Location: Three Rivers, Michigan
Posts: 64
|
Need a tuner around Mich.
I'am looking for a tuner that will work with my texas speed vvt cam. I live 20 miles south of Kalamazoo Mich. and 20 miles north of the Ind. line. JRE is remote tuning it right now and the car runs fine but, I'am not a computer guy and have all kinds of problems with logging and I really think the car needs to be on a dyno to get full potential out of it. I'am planning more mods and want a tuner within a reasonable distance that will work with me. I checked with Livornoise Motorsports but they will only work with me if I change the cam, they will not work with vvt cams. I really don't want to change cams again if I don't have to. Anyone know any good tuners my way.
__________________
2010 2ss/rs,a6, Hellion top mount twin turbo,rx catch can,zl1 fuel pump,adm fpcm,I.D.850 inj.,ls3 conversion,zr1 3bar map. forged rods&pistons, 160 stat, tuned by T.J.Grimes at Baker Engineering, with his spec cam. BMR suspension upgrades.
|
12-09-2013, 03:12 PM | #2 |
Drives: 2010 rs/ss a6 Join Date: Sep 2011
Location: Three Rivers, Michigan
Posts: 64
|
I must be in tuner limbo out here. So noone knows of a tuner?
__________________
2010 2ss/rs,a6, Hellion top mount twin turbo,rx catch can,zl1 fuel pump,adm fpcm,I.D.850 inj.,ls3 conversion,zr1 3bar map. forged rods&pistons, 160 stat, tuned by T.J.Grimes at Baker Engineering, with his spec cam. BMR suspension upgrades.
|
12-09-2013, 03:25 PM | #3 | |
Drives: BLUE CAMARO ZL1 1LE M6 Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 15,225
|
Quote:
Give us a call and we will get you going. I have No Problem making the car run to it's full Potential. Ted.
__________________
www.jannettyracing.com
Celebrating 37 years Performance parts, Installation, Fabrication, Dyno tuning, Remote custom tuning, and alignments. 203-753-7223 Waterbury CT. 06705 email tedj@jannettyracing.com |
|
12-09-2013, 03:40 PM | #4 |
Drives: 2010 1ss m6 supercharged, 55 Chevy Join Date: Oct 2011
Location: Metro detroit
Posts: 52
|
Livernois motorsports, Alternative auto, Vector motorsports and Stenod performance, are all in the metro Detroit area.
|
12-09-2013, 04:43 PM | #5 |
Speed Freak
Drives: 2013 ZL1 Camaro, 2016 Camaro SS Join Date: Jun 2013
Location: Ardmore, OK
Posts: 2,637
|
Livernois either can't or won't work with your cam? Hmmm...
I think Fort Wayne is just as close, maybe you could make an appointment with Lingenfelter and they would do it. They are somewhere around there.
__________________
2016 SS -AGP twin Borg Warner 7163 EFR's, LT4 mechanical pump, LT4 injectors, Walbro 255 low side, Castrol SRF. 734whp/759 tq
2013 ZL1 -ADM - 427 LSX 6 bolt, O-ringed block built by LME. Twin PT6466 turbos. RPM custom manual trans, RPS Quad carbon clutch, 9" Hendrix rear diff & axles. ADM/squash fuel system, Ron Davis radiator, Spal fans, AGP air to air, turbo plumbing. LPE oil cooler, rear bushing upgrade, roll bar...etc. rwhp 1400+... 212.5mph, best Texas mile to date. |
12-09-2013, 05:27 PM | #6 |
Drives: 2010 rs/ss a6 Join Date: Sep 2011
Location: Three Rivers, Michigan
Posts: 64
|
Thanks for the info guys
__________________
2010 2ss/rs,a6, Hellion top mount twin turbo,rx catch can,zl1 fuel pump,adm fpcm,I.D.850 inj.,ls3 conversion,zr1 3bar map. forged rods&pistons, 160 stat, tuned by T.J.Grimes at Baker Engineering, with his spec cam. BMR suspension upgrades.
|
12-12-2013, 11:22 AM | #7 |
Drives: Firehawk Join Date: Jun 2009
Location: Port Huron
Posts: 213
|
We would be more than happy to assist you in your tuning needs, please give me a call at the shop
1-586-790-2970 |
12-17-2013, 03:55 PM | #8 |
I lurk
|
Vector is a great shop to work with, very pleased with the service!
__________________
460 at the wheel so far...
VMS Stage 2.5 Camshaft Kit- Comp cam LSA 114,227/239, .613 .623, RotoFab CAI, VMS ported intake manifold,Kooks 1 3/4" headers with HF cats, Corsa Catback, VMS custom dyno tune,TechAFX engine hose relocation kit, DSS 1400 hp axles, BMR toe rods and links, LS9 Clutch, Hurst short throw with roll out, Liberty Gear built tremec 6060. |
12-17-2013, 09:41 PM | #9 |
Drives: 2010 Camaro SS/RS LS3 Join Date: Apr 2013
Location: Bloomfield Hills, Michigan
Posts: 1,088
|
Lidio at Alternative Auto in Chesterfield Twp north of Mt Clemens is one of the best, 485 rwhp with my cam modded LS3. Will be returning in the spring for my 3.91 gears.
|
12-31-2013, 11:27 AM | #10 |
Drives: 2016 Supercharged SS Join Date: Jul 2011
Location: Michigan/Indiana
Posts: 112
|
We now have a shop in Metro Detroit - Beck Rd/96, right off the highway. Feel free to call Tim Dyer our sales Manager @ our main shop in Decatur, Indiana and he can answer any questions (260) 724-2552 ext. 1001. Thanks, Kristen www.lingenfelter.com
|
12-31-2013, 11:38 AM | #11 |
Philippians 4:13
Drives: SLP Supercharged LS3 Join Date: Aug 2009
Location: The Motor City - Michigan
Posts: 2,902
|
__________________
|
12-31-2013, 04:22 PM | #12 |
Drives: 2011 Silver Convertible 1SS, Join Date: Sep 2011
Location: kalamazoo,Mi
Posts: 65
|
I live just North of Kalamazoo. I used Jennetty also..Ted and the guys have helped a ton!!!
maybe we hook up this summer? I work in Elkhart and have a 10 SS vert. |
|
|