Rear deck & speaker rattle simple and fast solution - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Spartan01 · 01-12-2014, 01:00 PM

I was getting serious rattle and distortion whenever a bass heavy track came on. I isolated the noise to the rear deck and speakers. After reading the forums on how to access the rear speakers, I looked for an easier and faster solution. I came up with folding down the rear seat, open the trunk, fold down the front seats, and then crawl into the trunk on my back. Once there, I applied Dynamat to the underside of the rear deck. Took about half an hour, and used 3/4 of a 4 Square-foot sheet. Removed approximately 90% of rattle and distortion.

Iwantone2 · 01-13-2014, 11:31 AM

Pics?

Tizzle · 03-02-2014, 01:44 AM

Can you post a picture as well, I'm looking on doing this but can't find any pictures of this

spadz93 · 03-07-2014, 09:18 AM

third for pictures, really would like to see how you did this

danny_boy1946 · 03-09-2021, 08:11 AM

Yes, I would like to see pictures please

01-12-2014, 01:00 PM	#1
Spartan01 Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013 Location: Falls Church, Virginia Posts: 3,600	Rear deck & speaker rattle simple and fast solution I was getting serious rattle and distortion whenever a bass heavy track came on. I isolated the noise to the rear deck and speakers. After reading the forums on how to access the rear speakers, I looked for an easier and faster solution. I came up with folding down the rear seat, open the trunk, fold down the front seats, and then crawl into the trunk on my back. Once there, I applied Dynamat to the underside of the rear deck. Took about half an hour, and used 3/4 of a 4 Square-foot sheet. Removed approximately 90% of rattle and distortion. __________________ "You simply cannot trust quotes found on the internet." -Abraham Lincoln

01-13-2014, 11:31 AM	#2
Iwantone2 Voice Of The Voiceless Drives: CGM 1SS RS Join Date: Feb 2009 Location: OC Cali Posts: 9,617 View My Garage	Pics? __________________

03-07-2014, 09:18 AM	#4
spadz93 BUMBL Z Drives: 2015 ZL1 Join Date: Nov 2013 Location: Northern NJ Posts: 2,573 View My Garage	third for pictures, really would like to see how you did this __________________ Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq

03-02-2014, 01:44 AM	#3
Tizzle Drives: 2010 Camaro 2SS/RS Join Date: May 2013 Location: San Antonio Posts: 18 View My Garage	Can you post a picture as well, I'm looking on doing this but can't find any pictures of this

03-09-2021, 08:11 AM	#5
danny_boy1946 Drives: 2011 camaro ss Join Date: Oct 2018 Location: Lebanon Ohio Posts: 3	Yes, I would like to see pictures please