V6 Camaro Performance Upgrades - Page 11 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

sales@vararam.com · 11-20-2009, 10:25 AM

Quote:

Originally Posted by Milk 1027

Vararam has not made a V6 intake kit for the Camaro. They have stated that the G8 and Camaro kits are slightly different. So I wouldn't be too sure on getting that.

CORRECT!!! This is not a kit for the V-6 Camaro!!!! It is for the Pontiac G8!!! We will be developing a unit shortly for the V6 - but this is not it!!!!
I will contact the dealer and have them correct!!
Steve
Vararam Industries!

scrming · 11-20-2009, 11:34 AM

Quote:

Originally Posted by sales@vararam.com

CORRECT!!! This is not a kit for the V-6 Camaro!!!! It is for the Pontiac G8!!! We will be developing a unit shortly for the V6 - but this is not it!!!!
I will contact the dealer and have them correct!!
Steve
Vararam Industries!

I'm going to the track tomorrow afternoon... I need one NOW!! LOL!

WCoolBreeze · 11-24-2009, 08:36 AM

Does anyone out there know when the GMPP Air Intake Kit will be released, I have already ordered and paid for it except there is a delay. Asked the parts department at the dealership yesterday and they have no new information and I want to stay with GMPP and not go aftermarket. Also does any one know when GMPP will be releasing Shortie Headers for the V-6.

Walt B.

scrming · 11-30-2009, 07:17 PM

Quote:

Originally Posted by CamaroSS_junkie

Looking at the Hennessy cold air intake for my SS1. Has anyone had experience with these intakes? What kind of gain? Also looking at the Magnaflow 2.5" comp series cat back. Wondering if anyone has any input with this combination. Thanks

This is a V6 performance thread....

Mohrg Beast · 12-15-2009, 08:16 PM

http://northamericantuning.com/catal...roducts_id/947
this is the one i installed a couple months or so on mine..i absolutely love it. i myself can feel a difference in the before and after. id recommend this cai if you really want one. took about 20 mins to take stock off and install this one. no cutting or anything..just took the old box out that held the other filter. but i may put it back in and customize it to go around this one..i seen a guy at the Talladega meet that had that done..looked pretty cool and also protected the cai from debris. but all in all i really like this product, one of my favorite mods. it made the engine have a slightly deeper growl, SLIGHTLY, and makes a really cool whistling sound as the air sucks through the intake. so when your driving and you hammer down even for a second it whistles and its really distinct too. lol. i drive through the city where the sound echos off the buildings and people wonder why my cars bouncing up and down cause i keep hitting the gas hard and letting off just to hear the air rushing through the filter..LOL. but other than that its very sturdy, installed in a few mins, seems to me to add more power that i can actually feel, sounds cool, looks great even with a painted engine cover, and personalizes your underhood features.you can also get the sleave to match just about any stock color.

murf5 · 12-16-2009, 08:26 AM

does anybody know where you can buy that four gauge cluster for the center console?

mrray13 · 12-16-2009, 08:41 AM

Junk yard, for now. Dealership in time. But due to the fact you have an LS, and the gauge cluster is only available in 2LT/2SS, you won't have the proper harness for it.

CamBoy1120 · 12-28-2009, 08:18 PM

Yo man im totally digging your car man.. Hardcore..

CamBoy1120 · 12-28-2009, 08:19 PM

that was to mohgr beast...

JBAGREG · 12-30-2009, 07:14 PM

JBA V6 Camaro Applications:

1816S 2010 Chevrolet Camaro V6 JBA 1 5/8” Cat4Ward Shorty Headers $399.00
1816SJS 1816S SILVER CERAMIC JBA 1 5/8” Cat4Ward Shorty Headers $574.00
1816SJT 1816S TITANIUM CERAMIC JBA 1 5/8” Cat4Ward Shorty Headers $574.00

40-3116 Exhaust JBA 2.5” Axle Back Exhaust $499.00

scrming · 12-30-2009, 08:24 PM

Quote:

Originally Posted by JBAGREG

JBA V6 Camaro Applications:

1816S 2010 Chevrolet Camaro V6 JBA 1 5/8” Cat4Ward Shorty Headers $399.00
1816SJS 1816S SILVER CERAMIC JBA 1 5/8” Cat4Ward Shorty Headers $574.00
1816SJT 1816S TITANIUM CERAMIC JBA 1 5/8” Cat4Ward Shorty Headers $574.00

40-3116 Exhaust JBA 2.5” Axle Back Exhaust $499.00

We installed my JBA headers (1816S) yesterday!

I have no performance data yet (dyno on June 9th) but the sound difference is amazing! Very happy!

Install thread is here: http://www.camaro5.com/forums/showthread.php?t=58526

mrray13 · 01-01-2010, 07:55 PM

Got my JBA shorties, 1816S, installed as well. Definitely changed the tone! It is way more aggresive then with just the Flowmasters. Hopefully will see dyno Tuesday, 5th, at the latest.

Cyber Gray · 01-10-2010, 05:39 AM

Hi Guys!

This is my first mail. I noticed that every one is really interested in boosting the V6 including me. I hate this quite engine.

I have contacted Borla to get more info on HP gained after installing Catbacks is....

12 to 15 on average !!

But I feared losing my warranty, thats why I will have to go for GM PP. Did anyone tried them yet ?

ckaram · 01-10-2010, 07:21 AM

Quote:

Originally Posted by Cyber Gray

Hi Guys!

This is my first mail. I noticed that every one is really interested in boosting the V6 including me. I hate this quite engine.

I have contacted Borla to get more info on HP gained after installing Catbacks is....

12 to 15 on average !!

But I feared losing my warranty, thats why I will have to go for GM PP. Did anyone tried them yet ?

Go to the second "sticky" thread in the V6 section. Borla's in there.

11-24-2009, 08:36 AM	#143
WCoolBreeze 2SS Drives: 2016 2SS, Red Garnet Tint Join Date: Nov 2008 Location: Imperial, CA Posts: 1,343	Does anyone out there know when the GMPP Air Intake Kit will be released, I have already ordered and paid for it except there is a delay. Asked the parts department at the dealership yesterday and they have no new information and I want to stay with GMPP and not go aftermarket. Also does any one know when GMPP will be releasing Shortie Headers for the V-6. Walt B. __________________ 2016 Camaro 2SS 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) - For Sale Gen6, 2016 Camaro 2SS, Red Garnet Tint (with Silver Rally Stripes) Ordered: 2-12-2016 TPW: 3-7-2016 Built: 3-7-2016 VIN 1G1FH78G0157626 Delivered: 4-26-2016

12-16-2009, 08:41 AM	#147
mrray13 Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009 Location: southern Illinois Posts: 2,973	Junk yard, for now. Dealership in time. But due to the fact you have an LS, and the gauge cluster is only available in 2LT/2SS, you won't have the proper harness for it. __________________ *PacMan*

12-30-2009, 07:14 PM	#150
JBAGREG Account Suspended Drives: JBA SUPERSPORT 2SS/RS Vortech Blown Join Date: Apr 2009 Location: San Dimas Posts: 58 View My Garage	Complete JBA 2010 V6 Parts list. JBA V6 Camaro Applications: 1816S 2010 Chevrolet Camaro V6 JBA 1 5/8” Cat4Ward Shorty Headers $399.00 1816SJS 1816S SILVER CERAMIC JBA 1 5/8” Cat4Ward Shorty Headers $574.00 1816SJT 1816S TITANIUM CERAMIC JBA 1 5/8” Cat4Ward Shorty Headers $574.00 40-3116 Exhaust JBA 2.5” Axle Back Exhaust $499.00

01-01-2010, 07:55 PM	#152
mrray13 Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009 Location: southern Illinois Posts: 2,973	Got my JBA shorties, 1816S, installed as well. Definitely changed the tone! It is way more aggresive then with just the Flowmasters. Hopefully will see dyno Tuesday, 5th, at the latest. __________________ *PacMan*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Camaro Laws	ChevyNut	Off-topic Discussions	107	11-09-2016 05:40 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 07:05 PM
Fesler-Moss Camaro Announced	swchopper	5th Gen Camaro SS LS LT General Discussions	72	05-07-2009 09:40 AM
Camaro Accessories from SEMA	FenwickHockey65	5th Gen Camaro SS LS LT General Discussions	1	11-03-2008 02:25 PM
Q&A with fbodfather (Scott Settlemire) regarding upcoming Camaro	JustinZS	5th Gen Camaro SS LS LT General Discussions	22	05-20-2008 07:48 PM

12-15-2009, 08:16 PM	#145
Mohrg Beast TURBO HUNTER!!! Drives: 2010 Camaro Lt Vin #1974 Join Date: Jun 2009 Location: West Virginia Posts: 607 View My Garage	http://northamericantuning.com/catal...roducts_id/947 this is the one i installed a couple months or so on mine..i absolutely love it. i myself can feel a difference in the before and after. id recommend this cai if you really want one. took about 20 mins to take stock off and install this one. no cutting or anything..just took the old box out that held the other filter. but i may put it back in and customize it to go around this one..i seen a guy at the Talladega meet that had that done..looked pretty cool and also protected the cai from debris. but all in all i really like this product, one of my favorite mods. it made the engine have a slightly deeper growl, SLIGHTLY, and makes a really cool whistling sound as the air sucks through the intake. so when your driving and you hammer down even for a second it whistles and its really distinct too. lol. i drive through the city where the sound echos off the buildings and people wonder why my cars bouncing up and down cause i keep hitting the gas hard and letting off just to hear the air rushing through the filter..LOL. but other than that its very sturdy, installed in a few mins, seems to me to add more power that i can actually feel, sounds cool, looks great even with a painted engine cover, and personalizes your underhood features.you can also get the sleave to match just about any stock color.

12-16-2009, 08:26 AM	#146
murf5 Drives: 2010 Chevrolet Camaro LS Join Date: Dec 2009 Location: Wayne, IL Posts: 7 View My Garage	does anybody know where you can buy that four gauge cluster for the center console?

12-28-2009, 08:18 PM	#148
CamBoy1120 17 Yr old Owner :D Drives: 2010 1LT Camaro Join Date: Dec 2009 Location: Texas Posts: 126	Yo man im totally digging your car man.. Hardcore..

12-28-2009, 08:19 PM	#149
CamBoy1120 17 Yr old Owner :D Drives: 2010 1LT Camaro Join Date: Dec 2009 Location: Texas Posts: 126	that was to mohgr beast...

01-10-2010, 05:39 AM	#153
Cyber Gray Wind Rider Drives: ZL1 19 White; Jeep 5.7 GC 15 Join Date: Jan 2010 Location: Muscat Posts: 2,059 View My Garage	Hi Guys! This is my first mail. I noticed that every one is really interested in boosting the V6 including me. I hate this quite engine. I have contacted Borla to get more info on HP gained after installing Catbacks is.... 12 to 15 on average !! But I feared losing my warranty, thats why I will have to go for GM PP. Did anyone tried them yet ?