Ok, it isn't my Camaro, but it is Force fed... - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

obzidian · 07-27-2010, 03:15 PM

Quote:

Originally Posted by axis

Nope. I think they are fine, just twice the possible problems. It's just that there isn't much talk about the singles anymore and we don't need more of the single vs twin drama. The "big three" TT companies are shooting it out right now, lol.

As usual, a properly balanced single will perform just as well as twins.... but the single will require one large turbo instead of two smaller turbo's (more plumbing though) to have the same kind of headroom.

4thGen427CI · 07-27-2010, 07:05 PM

Quote:

Originally Posted by obzidian

Just want to make sure, is two of these:

Or two of these:

Cause I got a few of the former lying around and I think I'm your guy... Mr. X.

Shhh.... don't call me Mr. X though, that's my spy name...... it's a secret. heheheh... uh... ooh.

SoFlaZ · 07-27-2010, 07:13 PM

It's...BEAUTIFUL!

That has to be an LSX right?

IPS Brandon · 07-28-2010, 09:18 AM

Quote:

Originally Posted by SoFlaZ

It's...BEAUTIFUL!

That has to be an LSX right?

Yes we are using a LSx block

IPSjeff · 08-05-2010, 02:15 PM

Here are a few pics of it on its way to get an alignment done. Drove out of the shop and up on the trailer all by itself

http://www.flickr.com/photos/ipsmotorsports/

FloydSummerOf68 · 08-05-2010, 02:24 PM

Very clean setup...I love it.

IPSjeff · 08-06-2010, 06:11 PM

I will let Mark post up the vids and specifics but on lowly WG-pressure...

Z_Rocks · 08-06-2010, 06:43 PM

Quote:

Originally Posted by IPSjeff

I will let Mark post up the vids and specifics but on lowly WG-pressure...

Holy $hit Jeff... Is he planning to have 3 guys in the trunk for track time too? Or the car may fly away.

atomicfusion · 08-06-2010, 07:57 PM

Here is the long awaited dyno pull from today. We have only tuned the stand alone through the waste gates. After we get the car to the track we will start turning it up some.

This pull was made on waste gates (15psi) and the setup is ready for 30psi of boost.

I hope you enjoy!

Thanks to all the guys at IPS Motorsports for making this monster come to life!

Dyno Video

FloydSummerOf68 · 08-06-2010, 08:03 PM

I definitely want to see the MPH that beast traps.

Impressive.

Gotthat02fire · 08-06-2010, 08:29 PM

Very Very nice sounds awsome!!!!

IPS Brandon · 08-09-2010, 09:51 AM

Mark is modest, the car makes 1225 wheel at 15 psi with a little spike to 16.x, oh and over 1000 tq! It is rowdy!

ackeight · 08-09-2010, 11:10 AM

I just peed a little.

atomicfusion · 08-09-2010, 09:42 PM

We are taking the car to the track Wednesday if the weather holds out... I'll update with results after.

08-06-2010, 08:29 PM	#39
Gotthat02fire Drives: 2010 Camaro 1ss IOM Join Date: May 2009 Location: Williamsport,PA Posts: 2,246 View My Garage	Very Very nice sounds awsome!!!! __________________ Jannetty Racing Built and Tuned 416 Maggie Max Package even better now!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 12:25 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 05:33 PM

07-27-2010, 07:13 PM	#31
SoFlaZ Drives: 2013 SS LS3 Join Date: Feb 2007 Location: WPB FL Posts: 947 View My Garage	It's...BEAUTIFUL! That has to be an LSX right?

08-05-2010, 02:15 PM	#33
IPSjeff Drives: 2009 ZR1 Join Date: Nov 2009 Location: Columbus, OH Posts: 651	Here are a few pics of it on its way to get an alignment done. Drove out of the shop and up on the trailer all by itself http://www.flickr.com/photos/ipsmotorsports/

08-05-2010, 02:24 PM	#34
FloydSummerOf68 Drives: Corvette Join Date: Jul 2010 Location: Houston Posts: 145	Very clean setup...I love it.

08-06-2010, 06:11 PM	#35
IPSjeff Drives: 2009 ZR1 Join Date: Nov 2009 Location: Columbus, OH Posts: 651	I will let Mark post up the vids and specifics but on lowly WG-pressure...

08-06-2010, 07:57 PM	#37
atomicfusion Drives: 07 Z06 11 L99 SS 16 c7 16 1SS Join Date: May 2009 Location: Ohio Posts: 281 View My Garage	Here is the long awaited dyno pull from today. We have only tuned the stand alone through the waste gates. After we get the car to the track we will start turning it up some. This pull was made on waste gates (15psi) and the setup is ready for 30psi of boost. I hope you enjoy! Thanks to all the guys at IPS Motorsports for making this monster come to life! Dyno Video

08-06-2010, 08:03 PM	#38
FloydSummerOf68 Drives: Corvette Join Date: Jul 2010 Location: Houston Posts: 145	I definitely want to see the MPH that beast traps. Impressive.

08-09-2010, 09:51 AM	#40
IPS Brandon Drives: 2010 Camaro SS black Join Date: Aug 2009 Location: Columbus Ohio Posts: 907	Mark is modest, the car makes 1225 wheel at 15 psi with a little spike to 16.x, oh and over 1000 tq! It is rowdy!

08-09-2010, 11:10 AM	#41
ackeight Drives: 10' 2SS/RS Join Date: Jan 2010 Location: Rockwall, TX Posts: 1,389 View My Garage	I just peed a little.

08-09-2010, 09:42 PM	#42
atomicfusion Drives: 07 Z06 11 L99 SS 16 c7 16 1SS Join Date: May 2009 Location: Ohio Posts: 281 View My Garage	We are taking the car to the track Wednesday if the weather holds out... I'll update with results after.