New LS3 416cu Forged Motor - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SlowLS3 · 11-28-2011, 07:44 PM

Originally Posted by TRINIC5

F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost.
Now let me tell you some parts that consist of this built.

1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse.
Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts

Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings.
Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing.

ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts.

Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration)

Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets

This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike)

I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced.

I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00.

I am asking $8,700.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario.

SlowLS3 · 12-08-2011, 06:37 PM

bump for a deal

SlowLS3 · 12-13-2011, 04:30 AM

F1 guys, its better to change your oem motor now before it get hurt, sell it for a good market price, then a new forged motor can be affordable easier.

Big Top Gt · 12-17-2011, 08:27 AM

If you don't have a lawyer actively working on suing the guys who screwed you out of nearly $10k into oblivion, I'm coming to your house to crap in your mail box.

Seriously man, that's not right.

Bump for me wishing I had $10,000 to spend on a motor.

mikepage0007 · 12-17-2011, 04:30 PM

also got a 427lsx from mcp...they are known to be a good shop...have not instlled yet...good luck with sale

jsharp · 12-17-2011, 07:32 PM

Going with livernois for mine. 4500 for it But its short block

SlowLS3 · 12-19-2011, 01:53 PM

Quote:

Originally Posted by Big Top Gt

If you don't have a lawyer actively working on suing the guys who screwed you out of nearly $10k into oblivion, I'm coming to your house to crap in your mail box.

Seriously man, that's not right.

Bump for me wishing I had $10,000 to spend on a motor.

No I don't have a case, its too far away and by the time I am finish with the travelling, lost of work, hotel cost and Attorney fees, it will not be worth it.
This motor really cost me more than I am asking but it will help with the overall cost to recuberate part of the money. Thanks for the advice and concern.

ParisTNDude · 12-21-2011, 10:30 AM

If there's a vendor, on C5 or not, why don't you name the company so others might not receive the same sort of treatment? Just wondering.

SlowLS3 · 12-21-2011, 07:23 PM

Quote:

Originally Posted by ParisTNDude

If there's a vendor, on C5 or not, why don't you name the company so others might not receive the same sort of treatment? Just wondering.

Yes its a vendor and I realy didn't want to bring to deep him into this, he is a vendor here also, pm sent.

SlowLS3 · 12-26-2011, 09:05 AM

Quote:

Originally Posted by mikepage0007

also got a 427lsx from mcp...they are known to be a good shop...have not instlled yet...good luck with sale

MCP is good, record proven by holding the fatest NA record for the LS motor. Well its RobZ running 9.2x NA.
Motor is up for sale again but this time I am selling it cheaper just for the new year.

SlowLS3 · 01-02-2012, 08:01 AM

Buy with confidence, here are some feed back about me.
http://forums.corvetteforum.com/tran...dated-101.html
http://forums.corvetteforum.com/c6-p...r-trinic5.html
http://forums.corvetteforum.com/c6-p...ls3-motor.html

SlowLS3 · 01-12-2012, 06:42 AM

I just droped the price for a great deal, a used stock motor is selling for $5k and this is a complete forged motor with heads. I just can't go any lower but this is a deal.

Kumar07 · 01-12-2012, 08:12 PM

can u post up pics of it.. and how much hp and tq will it add

Quote:

Originally Posted by SlowLS3

I just droped the price for a great deal, a used stock motor is selling for $5k and this is a complete forged motor with heads. I just can't go any lower but this is a deal.

jsharp · 01-12-2012, 08:42 PM

Send me pics does include all bolt on parts like water pump pulleys alternater so forth

11-28-2011, 07:44 PM	#1
SlowLS3 Drives: sweet Join Date: Jan 2010 Location: next to God Posts: 47	New LS3 416cu Forged Motor Originally Posted by TRINIC5 F/S I am selling a Complete brand NEW LS3 416 Forged Motor 9.5-1 Compession, built by MCP Performance, ok let me just say MCP do hold the record for the fatest NA motor owned by Rob Z C5 Z06. He is a very very good builder and have built many fast motors with reliability, my present motor is a duplicate to this motor which made 860rwhp on low boost. Now let me tell you some parts that consist of this built. 1 NEW GM 6.2 L LS3 MOTOR, NOT USED, NEW Block from GM partshouse. Callies Compstar 4" Stroker Crank, Custom Diamond 6.125" H- BEAM Rods with ARP Bolts Total Seal Rings and Stainless Chrome top Rings, Napier as the 2nd rings. Clevite Ms 12199 H Main Bearing, Clevite CB 663 Rod Bearing, Durabond Cam Bearing. ARP Main Studs Bolts and ARP Heads Studs, New Melling Oil Pump, New Double Custom Timing Chain set, New Oil Pan, New Strainer, New Rear Covers with New seal, New Front Cover with new seals, New Lifter tray with new Bolts. Cam was selected by ECS as a F1 Cam( its their secret cut and I don't know the duration) Heads are LS3 Custom Heads done by Cartek with Dual springs and Titainium Retainers, with Cometic Head Gaskets This motor is not an imitation long block, its a Complete Motor (Long Block) with everything ready to install, its never started and everything was bought new with all machine work done by the builder. MCP is located in S. New Jersey and the number is 1 732 232 8174 (Mike) I am selling this motor for a part of what it cost me, I build this motor because of the bad experience I had with a Vendor here who sold me 1/2 a motor with the block not being good, I did use his Rotating Assembly but had it rebalanced and some minor changes, everything else had to be replaced. I paid ... $8450.00 plus a cam for $450.00 and shipping for $400.00. I then had to buy a new block, and all the missing parts, including machine work and labor to disassemble and re- assemble motor. I paid another $9000.00. I am asking $8,700.00 plus shipping, I am located in Amityville NY 11701 and can consider delivering within 100 miles. I can be contacted by calling 1 631 445 1618 Mario. __________________ Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one. Last edited by SlowLS3; 01-12-2012 at 06:38 AM.

12-08-2011, 06:37 PM	#2
SlowLS3 Drives: sweet Join Date: Jan 2010 Location: next to God Posts: 47	bump for a deal __________________ Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.

12-13-2011, 04:30 AM	#3
SlowLS3 Drives: sweet Join Date: Jan 2010 Location: next to God Posts: 47	F1 guys, its better to change your oem motor now before it get hurt, sell it for a good market price, then a new forged motor can be affordable easier. __________________ Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.

12-17-2011, 04:30 PM	#5
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	also got a 427lsx from mcp...they are known to be a good shop...have not instlled yet...good luck with sale __________________

12-17-2011, 07:32 PM	#6
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Going with livernois for mine. 4500 for it But its short block __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

12-17-2011, 08:27 AM	#4
Big Top Gt Account Suspended Drives: IOM 2010 2SS/RS (LS3) Join Date: Oct 2011 Location: South Florida, 33071 Posts: 677	If you don't have a lawyer actively working on suing the guys who screwed you out of nearly $10k into oblivion, I'm coming to your house to crap in your mail box. Seriously man, that's not right. Bump for me wishing I had $10,000 to spend on a motor.

12-21-2011, 10:30 AM	#8
ParisTNDude Owning SSes for 50 Years Drives: Sharkskin Grey LT1 Join Date: Apr 2010 Location: Paris, TN Posts: 3,139 View My Garage	If there's a vendor, on C5 or not, why don't you name the company so others might not receive the same sort of treatment? Just wondering. __________________ The new ride: 2023 Camaro, LT1, Sharkskin Grey Previous Performance Cars: 1966 Chevelle SS 4M, 2010 Corvette 6M 1968 Dodge Charger R/T Auto 2012 1SS 6M 1982 Corvette Auto 2010 1SS 6A 1984 Corvette Auto 2016 2SS 8A 1999 Camaro Auto 2017 HBM 1SS 1le 2002 C5 Corvette 6M 2018 2SS 2006 Corvette Auto 2023 Camaro LT1

01-02-2012, 08:01 AM	#11
SlowLS3 Drives: sweet Join Date: Jan 2010 Location: next to God Posts: 47	Buy with confidence, here are some feed back about me. http://forums.corvetteforum.com/tran...dated-101.html http://forums.corvetteforum.com/c6-p...r-trinic5.html http://forums.corvetteforum.com/c6-p...ls3-motor.html __________________ Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.

01-12-2012, 06:42 AM	#12
SlowLS3 Drives: sweet Join Date: Jan 2010 Location: next to God Posts: 47	I just droped the price for a great deal, a used stock motor is selling for $5k and this is a complete forged motor with heads. I just can't go any lower but this is a deal. __________________ Be aware, everywhere we go there are thieves, some try by being nice and some by lying and making us believe them. I got CON by one.

01-12-2012, 08:42 PM	#14
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Send me pics does include all bolt on parts like water pump pulleys alternater so forth __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 motor mount bolt	Coop	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	12	12-13-2010 07:23 AM
LS3 motor parts	fuffl	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	11	04-08-2010 06:46 PM
SPONSORS - 427 Forged LS3 Shortblock	StrictlyPro	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	03-10-2010 05:38 PM
Great Read and Info on Oil Weight	Banshee	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	1	11-23-2009 09:03 PM