Any one wrapped their side mirrors? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Murse · 10-19-2013, 07:20 PM

Anyone wrapped their side mirrors like the concept? Pics?

*Camaro_Corvette* · 10-19-2013, 07:52 PM

I plan on making mine look exactly like the concept. Except for the mirrors. I still don't think I'll wrap those. I got plenty of time to decide.

Murse · 10-19-2013, 08:02 PM

I wonder how much it would cost..... if its low we could always tear it off it it doesn't look good. I think it would look nice on a light color like the SW or the SIM

Midnight Rat · 10-19-2013, 08:10 PM

I saw a member here plasti dip on them?

*Camaro_Corvette* · 10-19-2013, 08:26 PM

I'm not sure how much it would be, but I wouldn't mind knowing if you find out.

tramtwo · 10-19-2013, 10:14 PM

Quote:

Originally Posted by 2013 1LE

I saw a member here plasti dip on them?

http://www.camaro5.com/forums/showpo...2&postcount=73

I have removed it now... I ran black mirrors and no wrap for a while.

Sent from my DROID RAZR using Tapatalk

Crand · 10-20-2013, 04:44 AM

I have mine wrapped. I tried plasti-dip just to see how they looked. The dip wore out pretty quick and cleaning it was a pain in the ass. I bought a small roll of 3M vinyl from Amazon and wrapped the mirrors. It looks 1000x better than the dip.

Pics:

Crand · 10-20-2013, 04:53 AM

I also have a decal to make the grille opening match the concept. I haven't put that on yet because you have to pull the front off to do it right. I'll probably get to it this week. I'm really anxious to complete it because the only part that'll be missing after that is the hash mark.

Then the car will look like it's supposed to! (I'm looking at you, GM)

edit: forgot, ZL1 wing is also required.

notagoat · 10-20-2013, 09:00 AM

I had mine professionally wrapped a few years back, left the bottom and ends red, ran me $100 for both. Love the look, don't regret it!

Blk-Ice · 10-20-2013, 02:34 PM

Does anyone know of a place in VA or NC that can do Veh part wraps?

Hot Tamales · 10-20-2013, 05:20 PM

Quote:

Originally Posted by Crand

I have mine wrapped. I tried plasti-dip just to see how they looked. The dip wore out pretty quick and cleaning it was a pain in the ass. I bought a small roll of 3M vinyl from Amazon and wrapped the mirrors. It looks 1000x better than the dip.

How hard was the 3M install?

Sent from my iPhone using Tapatalk - now Free

Crand · 10-21-2013, 12:32 AM

Quote:

Originally Posted by notagoat

I had mine professionally wrapped

Mine were wrapped by an amateur. Curses!

Crand · 10-21-2013, 12:34 AM

Quote:

Originally Posted by Hot Tamales

How hard was the 3M install?

It's kind of a pain in the ass to get it perfect. Once you get the hang of it, it's fairly easy. It just takes practice. The most difficult part for me was the inside half of the mirror pod. Wrapping it and making sure that it covers all of the inside surface so you can't see any red from any angle behind the mirror was fairly tricky.

10-19-2013, 07:20 PM	#1
Murse Drives: 2014 1LE (STORMTROOPER) Join Date: Oct 2013 Location: San Antonio Posts: 248 View My Garage	Any one wrapped their side mirrors? Anyone wrapped their side mirrors like the concept? Pics?

10-19-2013, 07:52 PM	#2
Camaro_Corvette 36.58625, -121.7568 Drives: Team 1LE Join Date: Mar 2008 Location: Earth Posts: 23,709 View My Garage	I plan on making mine look exactly like the concept. Except for the mirrors. I still don't think I'll wrap those. I got plenty of time to decide. __________________ I am seriously never serious vv V vv Next order of business

10-19-2013, 08:26 PM	#5
Camaro_Corvette 36.58625, -121.7568 Drives: Team 1LE Join Date: Mar 2008 Location: Earth Posts: 23,709 View My Garage	I'm not sure how much it would be, but I wouldn't mind knowing if you find out. __________________ I am seriously never serious vv V vv Next order of business

10-20-2013, 04:44 AM	#7
Crand Drives: away the ladies :( Join Date: Aug 2012 Location: Phoenix, AZ Posts: 235	I have mine wrapped. I tried plasti-dip just to see how they looked. The dip wore out pretty quick and cleaning it was a pain in the ass. I bought a small roll of 3M vinyl from Amazon and wrapped the mirrors. It looks 1000x better than the dip. Pics: Attached Images

10-20-2013, 09:00 AM	#9
notagoat Drives: 2015 BMW M4 Join Date: Apr 2010 Location: Jacksonville, FL Posts: 333	I had mine professionally wrapped a few years back, left the bottom and ends red, ran me $100 for both. Love the look, don't regret it! Attached Images __________________

10-19-2013, 08:02 PM	#3
Murse Drives: 2014 1LE (STORMTROOPER) Join Date: Oct 2013 Location: San Antonio Posts: 248 View My Garage	I wonder how much it would cost..... if its low we could always tear it off it it doesn't look good. I think it would look nice on a light color like the SW or the SIM

10-19-2013, 08:10 PM	#4
Midnight Rat Drives: SS 1LE Join Date: Nov 2012 Location: Texas Posts: 1,829	I saw a member here plasti dip on them?

10-20-2013, 04:53 AM	#8
Crand Drives: away the ladies :( Join Date: Aug 2012 Location: Phoenix, AZ Posts: 235	I also have a decal to make the grille opening match the concept. I haven't put that on yet because you have to pull the front off to do it right. I'll probably get to it this week. I'm really anxious to complete it because the only part that'll be missing after that is the hash mark. Then the car will look like it's supposed to! (I'm looking at you, GM) edit: forgot, ZL1 wing is also required.

10-20-2013, 02:34 PM	#10
Blk-Ice 750HP of Twisted Reaper! Drives: Blk 2SS/Blk Carb Fibr NS-1 stripes Join Date: Oct 2010 Location: Northern VA & NC Posts: 2,244 View My Garage	Does anyone know of a place in VA or NC that can do Veh part wraps? __________________ *Fear the LMR Twisted Reaper Brotherhood!*