01-02-2018, 11:50 AM | #281 |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,607
|
|
01-02-2018, 12:21 PM | #282 |
Drives: 2012 ZL 1 #370 Join Date: Dec 2010
Location: Switzerland
Posts: 351
|
I know the video, thanks. I like it more on the safe side.
My new sc will be installed in the spring And i want adjust it correct. I will sleep better then |
01-02-2018, 12:39 PM | #283 |
Big Crow
Drives: '13 ZL1 Join Date: Mar 2017
Location: California
Posts: 1,486
|
^ Notice how in the first video he holds the position closed AS he is tightening one bolt?
I found out as you tighten the bolts it tends to undo your mod and open it back up to where it was or worse, if you had it exactly where you wanted it before tightening. It's not complicated if you do it how he did. |
01-02-2018, 02:19 PM | #284 |
Drives: Nil Join Date: Sep 2017
Location: Palm beach
Posts: 32
|
anybody with 10% lower do this? i see 10.5-11PSI, not sure if previous owner did this or not
|
01-02-2018, 03:16 PM | #285 |
Big Crow
Drives: '13 ZL1 Join Date: Mar 2017
Location: California
Posts: 1,486
|
Headers and CAI will affect your numbers also, you might want to mention that if you want apples to apples to figure it out. I think hognutz had long tube headers (and CAI) on when he made this post but not sure.
|
01-02-2018, 03:57 PM | #286 | |
Drives: Nil Join Date: Sep 2017
Location: Palm beach
Posts: 32
|
Quote:
Appreciate the input i’ve got rotofab CAI with LT headers as well. |
|
06-05-2018, 08:01 PM | #287 |
Drives: 2013 ZL1 Coupe Join Date: May 2018
Location: Michigan
Posts: 33
|
I did mine tonight and was surprised at how much the the arm moved when I loosened the bolts. I'll give it a test ride tomorrow
|
06-06-2018, 01:36 AM | #288 |
YOOZ GOTA B FREKN KIDN ME
|
I adjusted my original supercharger bypass and it moved quite a bit. I gained about 1.5 psi boost felt like 50 ass dyno HP gain and lost fuel economy to the tune of about 1.5 mpg.
I had the super charger replaced 5/2018 under warranty and the replacement blower bypass valve was set perfectly as delivered. It felt like the new one spooled up a little quicker for more torque at a lower RPM.
__________________
The Zeldabeast! A True Road Warrior!
2018 Dodge Challenger Hellcat WideBody 6MT 2013 ZL1 Camaro 6MT 2015 GMC Sierra 1500 SLT 6.2 L86 Crew Cab 2012 Aprilia RSV4 R 2015 Husqvarna FC450 Motomadness First Car: 1973 Dodge Charger 340 Magnum 4MT Factory Hurst Pistol Grip Shifter |
06-06-2018, 01:39 AM | #289 |
YOOZ GOTA B FREKN KIDN ME
|
Let us know your results!
__________________
The Zeldabeast! A True Road Warrior!
2018 Dodge Challenger Hellcat WideBody 6MT 2013 ZL1 Camaro 6MT 2015 GMC Sierra 1500 SLT 6.2 L86 Crew Cab 2012 Aprilia RSV4 R 2015 Husqvarna FC450 Motomadness First Car: 1973 Dodge Charger 340 Magnum 4MT Factory Hurst Pistol Grip Shifter |
06-10-2018, 04:41 AM | #290 |
Drives: 2013 ZL1 Coupe Join Date: May 2018
Location: Michigan
Posts: 33
|
By looking at the boost gauge, i guess I picked up maybe a pound. Before the needle was just past the center hash, not showing any space between the needle and the hash mark. Now there is about a needle with of space between them. I cant tell any difference on top end but it does feel like it has better low rpm throttle response.
|
06-10-2018, 05:54 PM | #291 |
Drives: 13ZL1 Join Date: Dec 2017
Location: OBX
Posts: 67
|
Just had my Supercharger replaced and I adjusted the screw out about half turn I could see the stop moving I stopped when it did.
I’am sure it helped but I put my Roto Fab and ported throttle bottle back on at the same time. Have not experienced any “flutter” as some people have with the solid coupler I have a mt. |
|
|
|
|