12-10-2013, 03:46 PM | #1 |
sswiss Build Thread
I did not think I would have to start a build thread for my car, but here I am a bit more than a year after I purchased my Car and I have done all kinds of things to my car already. Some good some not so much
|
|
12-10-2013, 04:00 PM | #2 |
SoCal HT5 COTW 4/21/13
Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011
Location: Sandy Eggo
Posts: 3,047
|
|
12-10-2013, 04:00 PM | #3 |
The day I got my car
Still all stock
|
|
12-10-2013, 04:04 PM | #4 |
New ACS Heat Extractor Hood
The first step to a ZL1 look alike
|
|
12-10-2013, 04:06 PM | #5 |
Shark Gills
A small change
|
|
12-10-2013, 04:07 PM | #6 |
A few steps foward and then a couple right back
So after working on my car, Carma seemed to have a different plan
|
|
12-10-2013, 04:09 PM | #7 |
New Fog Lights
After that little set back I figured I had to get right back on the horse and continue with the mods
|
|
12-10-2013, 04:14 PM | #8 |
ZL1 Front End Conversion
I just recently found a full ZL1 OEM front fascia on Chicago5thGen that included the Wheel liners, Brake ducts, Belly Pan, and Grills for a very good Price. So its now time to continue changing the front of my SS
|
|
12-10-2013, 04:17 PM | #9 |
Part Drawings
Figured I would post some of the Drawings that helped me find all the parts I needed.
|
|
12-10-2013, 04:20 PM | #10 |
Behic2320, You need to be a bit more patience. I was just gathering all the pics I needed
Last edited by sswiss3000; 02-16-2015 at 05:15 PM. |
|
12-10-2013, 04:24 PM | #11 |
SoCal HT5 COTW 4/21/13
Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011
Location: Sandy Eggo
Posts: 3,047
|
Haha im not very patient Im sitting on here because i dont have my car until tomorrow haha. Anyways the car looks great and the conversion looks like its going smoothly cant wait to see the bumper on
|
12-10-2013, 04:29 PM | #12 |
Me neither. The bumper is at the body shop at the moment for a new coat of AGM and the remaining parts I needed are on order with the dealership. If everything works out perfectly I should get all the bits and pieces back by Friday so that I can spend the weekend putting it all back together.
|
|
12-10-2013, 04:53 PM | #13 | |
SoCal HT5 COTW 4/21/13
Drives: 2011 SS/RS Blown & Cammed LS3 Join Date: Sep 2011
Location: Sandy Eggo
Posts: 3,047
|
Quote:
|
|
12-11-2013, 03:31 PM | #14 |
Painting the ZL1 Bumper
I just stopped by the GM Body Shop and they have already completed the Cowl line adjustment as well as put down an isolator layer. The color will go down today or tomorrow and I can pick it up on Friday.
|
|
|
|
|
|