Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics


Reply
 
Thread Tools
Old 08-06-2022, 11:55 PM   #1
Little Walter
 
Drives: ZL1
Join Date: Dec 2016
Location: New Orleans
Posts: 260
Ported LSA Supercharger Highest HP Gains

What are the highest HP gains that anyone have seen from porting the LSA supercharger, 102/103mm TB, and larger cold air intake?
Little Walter is offline   Reply With Quote
Old 08-08-2022, 11:57 AM   #2
JB'sZL1

 
Drives: 2013 ZL1 and 2019 Ram Laramie
Join Date: May 2017
Location: Milwaukee
Posts: 1,259
I don't know exactly what gains I have with those mods, but I have them, with pulleys and crank, and gained 260hp. I tend to think the latter mods are more than half of the gain. So with a full tilt port, 102 mm and cai, I'm thinking 100-110 hp. With corn I near 800rwhp.

Last edited by JB'sZL1; 08-08-2022 at 02:28 PM.
JB'sZL1 is offline   Reply With Quote
Old 08-08-2022, 02:23 PM   #3
Dega Man
 
Drives: ZL1
Join Date: Oct 2012
Location: Talladega
Posts: 631
I did the NW103 along with a 5 inch CAI at the same time as porting the blower/ snout and gained 73hp.
Dega Man is offline   Reply With Quote
Old 08-08-2022, 03:22 PM   #4
bigti99a
 
Drives: 2012 ZL1 m6
Join Date: Dec 2020
Location: MD
Posts: 15
yea dont have gains but i had a ported blower with 5" intake and stock throtle body. stock cam heads on 93. upgraded to katech 103mm and gained around 50hp. different dyno and tuner but its worth it for sure.
bigti99a is offline   Reply With Quote
Old 08-12-2022, 11:46 PM   #5
Dega Man
 
Drives: ZL1
Join Date: Oct 2012
Location: Talladega
Posts: 631
I think the Cadillac guys have done a lot more modifying in this area seemingly.
Dega Man is offline   Reply With Quote
Old 08-14-2022, 10:18 AM   #6
FASTFATBOY
 
Drives: 2013 ZL1
Join Date: Nov 2018
Location: Mobile Al
Posts: 299
Info is on FB and on Youtube, Justin White dyno'd damn near every ported blower back to back on the same car.
__________________
2013 ZL1 M6, 2.4 pulley and a few bolt ons. 590 wheel and 11.70@122 on a hard tire.
FASTFATBOY is offline   Reply With Quote
Old 01-19-2023, 09:05 AM   #7
Little Walter
 
Drives: ZL1
Join Date: Dec 2016
Location: New Orleans
Posts: 260
Does anyone else have any recent info to share on gains from porting these blowers?
Little Walter is offline   Reply With Quote
Old 01-22-2023, 11:33 PM   #8
Dega Man
 
Drives: ZL1
Join Date: Oct 2012
Location: Talladega
Posts: 631
This still seems to be more discussed with results on the CTSV Forum. 800ish whp seem to be the max out point from an auto tranny with a well ported LSA blower with all the other supporting modes and exhaust.
Dega Man is offline   Reply With Quote
Old 01-22-2023, 11:36 PM   #9
eLeSthree

 
Drives: 2011 Camaro SS 6sp
Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,902
If you follow the porting companies on instagram, they post results all the time.
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Pro Flo XT, 1158whp 1017wtq.

2010 CTS-V A6 - "Stock"
eLeSthree is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:46 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.