02-25-2019, 07:31 PM | #15 |
Drives: 2010 Camaro 1LT 6-SPD Join Date: Nov 2018
Location: Braselton, Georgia
Posts: 20
|
|
02-25-2019, 07:40 PM | #16 |
Drives: 2010 Camaro 1LT 6-SPD Join Date: Nov 2018
Location: Braselton, Georgia
Posts: 20
|
I forgot to mention that I used a curved end pick tool to tighten the screen retention screws when I had it in my F150. I didn't have any trouble reaching them in the RV though.
Sent from my Z2_PRO using Tapatalk |
03-08-2019, 05:48 PM | #17 |
|
Here is a updated photo sorry for the mess in the photo I still need to route the back up Camera, also sorry for the one side photo, both were taken the same way but one decided to be a problem child
__________________
Cai intake and a few other mods😎
|
03-12-2019, 07:52 AM | #18 |
|
Probably the last update on this post, so 2 issues, volume is pretty low so I'll be replacing the stock amp with a kenwood x801 5 channel amp, the 2nd issue is with the pac kit, everything seems to work but the heated seats indicator, I haven't had time to really mess with thos yet to see what the solution is
__________________
Cai intake and a few other mods😎
|
04-04-2019, 05:43 PM | #19 |
Drives: 2010 Camaro 1LT 6-SPD Join Date: Nov 2018
Location: Braselton, Georgia
Posts: 20
|
Just changed out the junk Metra dash kit for the Scosche V2 kit. I also pulled the te103ap out of the RV and ok installed it in the Camaro. I just wasn't happy with the sound quality on the Joying and the Xtrons will run custom ROMs.
I considered the PAC but wanted the vehicle settings available on the Scosche. Sent from my Z2_PRO using Tapatalk |
04-05-2019, 02:22 PM | #20 |
|
What custom rom do you use, I had to go into the factor screen to get decent volume out of the head unit, plus to put the chevy logo on the reset screen
__________________
Cai intake and a few other mods😎
|
|
|
|
|