10-01-2017, 12:19 AM | #29 |
BUMBL Z
|
Ended up using a relay and a couple add-a-fuses (AAFs). AAF 1 gets a trigger wire off the high beam fuse and AAF 2 feeds power into the fog light fuse (fused power too, yay safety!). Power source comes from the cable bolted onto the box, and ground comes from the fender bolt adjacent the fuse block. Works like a charm, and any back feed from the fogs would just be fed back to the battery, positive to positive. If anyone has any questions, PM me (no matter how old the thread, I'll do my best to help)
Sent from my Pixel XL using Tapatalk
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
10-01-2017, 01:41 PM | #30 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 367
|
I ordered a set of fog lights from Phastec and they stay on with the high beams.They were plug and play hook ups.
|
10-01-2017, 05:52 PM | #31 |
Drives: 2014 2SS blue Join Date: Jun 2016
Location: Socal
Posts: 689
|
Any better visibility?
__________________
|
10-02-2017, 07:01 AM | #32 |
BUMBL Z
|
Yeah. The high beams shoot farther down the road while the fog lights keep things that are up close lit up nicely. Definitely worth it in my opinion
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
10-02-2017, 07:52 AM | #33 |
Drives: 2015 Chevy Camaro 2LS Join Date: May 2017
Location: MWC, OK
Posts: 815
|
|
10-08-2017, 03:30 PM | #34 |
Since 1978
Drives: 2015 1LE SIM RS/2SS Join Date: Mar 2009
Location: Lower Alabama
Posts: 70
|
My headlights were aimed too high from the factory which annoyed me on high beam and annoyed everybody on low beam. Bought a 6 mm hex key and I have plenty of light where I need it now. There's an aiming thread on here from 2011 with GM diagrams.
__________________
2015 1LE SIM RS/2SS (current)
2002 SS black w/SLP air box, exhaust, 10 spoke chrome wheels- 6 sp 1998 SS black- 6 sp 1993 Z28 black- 6 sp 1979 TransAm black T/A 6.6- 4 sp |
10-08-2017, 09:27 PM | #35 |
Drives: 2014 Camaro LS / 13 zl1 Join Date: May 2016
Location: Hayes , Va.
Posts: 367
|
|
04-18-2018, 08:04 PM | #36 |
Drives: 2013 Camaro LT, 2007 Hummer H3 Join Date: May 2017
Location: Omaha
Posts: 4
|
I still can't believe somebody doesn't make a harness or some kind of connector to fix this problem. I have the same issue with my Hummer. but there is a fix on the Hummer forums, I just haven't taken the time to do it.
Sorry.... Bump |
04-19-2018, 04:45 AM | #37 |
Drives: M6 2013 2SS/RS Convertible Join Date: Jul 2014
Location: New Hampshire
Posts: 69
|
|
04-20-2018, 02:25 PM | #38 | |
BUMBL Z
|
Quote:
__________________
Current: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower w/ Idler Relocation, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, Tuned by Pat G
Past: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
05-01-2018, 09:04 AM | #39 | |
Drives: 2013 Camaro LT, 2007 Hummer H3 Join Date: May 2017
Location: Omaha
Posts: 4
|
Quote:
I don't have the factory halos. But do have aftermarket SPYDER Halo/projector lenses Thanks for the reply |
|
05-01-2018, 09:24 AM | #40 |
Drives: White 2015 Z/28 Join Date: Jul 2017
Location: Charleston SC
Posts: 208
|
http://www.gen5diy.com/20142015-Fogl..._description=1
^This will do exactly as you wish for the non-ZL1 people. "This harness is for those with 2010-2015 (non-ZL1) Camaro's with factory equipped foglamps and wish to have their foglamps come on automatically instead of having to use the push button on the dash. This harness will discontinue the function of the switch and allow the foglamps to come on automatically at night. This harness is not meant for those with 10-13 RS models that are looking for their DRL's to come on at night, this is only for those that have factory fog lights that are controlled via switch. The fog lights will also remain on with the highbeams. If you need the fog lights to go off with your highbeams please refer to our foglamp override with highbeam off fucntion." |
05-01-2018, 09:29 AM | #41 |
Drives: 2013 Camaro LT, 2007 Hummer H3 Join Date: May 2017
Location: Omaha
Posts: 4
|
Awesome. Thanks man
|
05-01-2018, 09:34 AM | #42 |
Drives: White 2015 Z/28 Join Date: Jul 2017
Location: Charleston SC
Posts: 208
|
No problem. I just installed the LS Fog Light kit from them the other weekend and love it! Great quality, fast shipping, and will answer any questions you might have prior, during or after install. I had a quick question about the LS bezel and they emailed me back within ~2 hours
|
|
|
Thread Tools | |
|
|