What Did You Do To Your Camaro Today?

[1JEWLDSSRS]

Gave her a bath with warm soap&water and installed my new sequentail turn sig harnesses from webelectrics. Very cool..

[whamslam3]

got charcoal metallic stripes put on

[Heaven_is_inferno_orange]

I gave my baby his first oil change today at 4700 miles. The guys at Valvoline absolutely loved the car too.

[2SSRS@Gen5diy]

Went for a drive and Passed 66k

[10RsCamaro]

Originally Posted by Powhusku

Installed my winter tires. And just in time for our first storm.

Damn just made it in time for the winter in october

[squirell]

Changed out my cloth dash and door panels for switchblade silver ones,
installed "chevrolet" door sill protectors.
Put in my newly purchased donut spare tire

[Lil Nix]

Originally Posted by squirell

Changed out my cloth dash and door panels for switchblade silver ones,
installed "chevrolet" door sill protectors.
Put in my newly purchased donut spare tire

i need a spare tire also, whered you find one?

[CaryE1]

Originally Posted by Powhusku

Installed my winter tires. And just in time for our first storm.

Holy cripes - I get cold just looking at that pic. That right there is the reason that I moved out of Montana.

[cactuseater]

Brought the '11 2SS/RS to life with an exhaust system Waiting until next week to re-install the ram air. Looking at the MRT V2 exhaust for my wife's RJT LT V6....I heard one with it yesterday and was totally impressed at the muscle car sound it delivered from the V6. A little pricey, but so far it's the only muffler that sounds good on that car. Looks like I'll be busy at the end of next week again....

[Earle.Barnes]

Installed my CAI intake. Really was super easy and really makes a difference with the HP and sound. Hard to believe it was that much of a difference.

[2SS BUMBLBE]

2 Nov - turned 10,000 miles
4 Nov - oil change
5 Nov - dumped catch can (approx 2 oz) & hard wired my radar detector

[Heaven_is_inferno_orange]

Spent 10 hours installing my after market dual color halo headlights. Didnt get the wiring finished since my switch hasnt come yet, but the headlight install is completed! It was not nearly as easy as the AAC video made it. >.< 2 hours on just prying apart the headlight assemblies. And I wont even tell you how much of a pain in the butt getting that front bumper off was. Lets just say when they made the instructional video they didnt make it for people with ground effects covering the bottom 2 bolts. And man was that concrete slab cold at 1 am....

A picture of the finished assemblies sitting on the stove top.

[bumblebabe]

well, friday night, had my 3 or 4 week old baby parked outside a friend's house... came out Saturday morning to paint transfer and two large dents on the driver door.




Took these with my gopro- hence the fish eye. Wiped the paint off clean, but found the dents, as well as some deeper scratches through the paint.

SO, Saturday night, installed my CAI intake to make my baby feel better for being hit and run on. Parked him inside the gated driveway of the same friend for the next two nights... avoided to any more heads...

[Ladybugsmom]

Originally Posted by bumblebabe

well, friday night, had my 3 or 4 week old baby parked outside a friend's house... came out Saturday morning to paint transfer and two large dents on the driver door.

Took these with my gopro- hence the fish eye. Wiped the paint off clean, but found the dents, as well as some deeper scratches through the paint.

SO, Saturday night, installed my CAI intake to make my baby feel better for being hit and run on. Parked him inside the gated driveway of the same friend for the next two nights... avoided to any more heads...

I feel your pain - I've been through the hit and run thing myself.... Ask your insurance if the deductible is lower filing a hit and run under "uninsured motorist" - mine was, made the pain more tolerable....

I set up an appointment for Ladybug to get her new exhaust! can't wait for Thursday!!!