HERITAGE GRILL LANDING PAD - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Blu Ray · 05-15-2015, 03:02 PM

Do I need to remove the entire bumper to Install the Landing pad I purchased. Heritage Grill is already installed.

Hopefully I can installed without removing, has anyone completed this and could provide some tips.

JTruck · 05-15-2015, 04:09 PM

Wrong section

CamaroJim56 · 05-15-2015, 05:36 PM

Might help to tell us which one you got.

Bluestreak 2010 · 05-15-2015, 05:44 PM

You don't need to remove the whole bumper. Just open the hood and remove the black triangle piece around the hood latch (can't think if it has an official name). This piece comes off by removing a few bolts and pulling out a few retaining clips. This should give you enough room to get your arm behind the grill the place the back piece of the landing pad in position.

45thCamaro · 05-15-2015, 07:31 PM

Quote:

Originally Posted by Bluestreak 2010

You don't need to remove the whole bumper. Just open the hood and remove the black triangle piece around the hood latch (can't think if it has an official name). This piece comes off by removing a few bolts and pulling out a few retaining clips. This should give you enough room to get your arm behind the grill the place the back piece of the landing pad in position.

Not saying this is wrong at all, I was lucky enough to be able to reach my hand inside the space for the hood latch and not have to remove anything.

Blu Ray · 05-18-2015, 08:56 PM

Quote:

Originally Posted by 45thCamaro

Not saying this is wrong at all, I was lucky enough to be able to reach my hand inside the space for the hood latch and not have to remove anything.

Thanks For the Replies.... Much appreciated

05-15-2015, 03:02 PM	#1
Blu Ray ALWAYS-N-BOOST Drives: 2021 ZLE A10 Join Date: Dec 2011 Location: Alpine, NJ Posts: 2,376	HERITAGE GRILL LANDING PAD Do I need to remove the entire bumper to Install the Landing pad I purchased. Heritage Grill is already installed. Hopefully I can installed without removing, has anyone completed this and could provide some tips. __________________ 2012 1LS M6 Black-Sold 2013 2LT M6 BluRay- Sold 2015 1SS 1LE M6 Black-Sold 2021 ZLE A10 Riverside Blue - Awaiting Arrival 01/10

05-15-2015, 04:09 PM	#2
JTruck Drives: 2014 Camaro 1LT/RS Join Date: Sep 2013 Location: Arizona Posts: 1,693	Wrong section __________________ Detailing is an involuntary obsession.

05-15-2015, 05:36 PM	#3
CamaroJim56 Obsessed Drives: 2016 Hyper Blue 2SS RS Join Date: Jun 2011 Location: Riverview, FL Posts: 2,601	Might help to tell us which one you got. __________________ 2016 Hyper Blue 2SS

05-15-2015, 05:44 PM	#4
Bluestreak 2010 Drives: IBM 2010 Camaro LS Join Date: Jun 2010 Location: Indianapolis, IN Posts: 1,686 View My Garage	You don't need to remove the whole bumper. Just open the hood and remove the black triangle piece around the hood latch (can't think if it has an official name). This piece comes off by removing a few bolts and pulling out a few retaining clips. This should give you enough room to get your arm behind the grill the place the back piece of the landing pad in position.