You are browsing camaro5 
 |
|
09-26-2023, 09:41 AM
|
#1 |
 Drives: 2010 Camaro SS Join Date: Jan 2023
Location: Dallas
Posts: 33
|
z/28 Control Arms
I am looking at upgrading my front rearward lower control arms to z/28 spec. The part numbers 23105014 and 23105015 are for the z/28 14-15 year model. Is there any verified difference in bushings, etc. compared to the stock SS reward lower control arms. My radius arms are z/28 spec.
|
|
|
|
09-26-2023, 12:31 PM
|
#2 |
  Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 931
|
Same arm, different bushing. According to JusticePete the non Z/28 bushings are very well made. If you need to replace the arm you might as well go Z/28, otherwise, unless you race there is probably no reason to upgrade.
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
|
|
|
|
09-26-2023, 02:01 PM
|
#3 |
     Drives: 2010 Camaro SS2,L99, LSA SC Join Date: Aug 2017
Location: Huntsville, AL
Posts: 2,155
|
It looks like the Z28 arms are stupid cheap right now and the SS ones are stupid expensive, at least on a couple of the sites I checked.
|
|
|
|
|
|
|
|
 |
|
|
