10-10-2014, 12:19 PM | #1 |
Thx TZD.
Drives: 2010 Supercharged Custom Camaro Join Date: Oct 2008
Location: Michigan
Posts: 1,100
|
Axle Noise??? 2010 custom
HELP!!!!!!
A little over a year an a half ago I had to put new axles in the Camaro. In the last month coming from the driver side there is a rotation clicking and or clunking noise. I think its an axle as when you push in the clutch the noise seems to go away. So its only under power we hear the "noise" The thing is it didn't do it all the time. Seems to come on after some tight corners or aggressive driving (on closed roads of course). Anyway......anyone have this happen and or know what it could be???? Something loose or do I have a bad axle? Thought I would throw this thread out there before getting the car in the air and getting under there to look or start tearing things apart. Spike you out there my friend
__________________
In many cases this isn't even keeping up with the Jones's, this is Jonesing and just plain KEEPING UP!!!
Last edited by rico-2SS; 10-10-2014 at 12:43 PM. |
10-10-2014, 12:27 PM | #2 |
Account Suspended
Drives: 2010 zr1 Camaro 2011 vert Join Date: Apr 2013
Location: everywhere
Posts: 1,121
|
You need to check for grease slinging.With a lose clamp or a split in the boot you could have lost your grease and wore the cv down.If you need any parts give me a call.If need be we can rebuild your cvs
|
10-10-2014, 12:36 PM | #3 |
Thx TZD.
Drives: 2010 Supercharged Custom Camaro Join Date: Oct 2008
Location: Michigan
Posts: 1,100
|
Didn't see any of that (grease) upon just ground inspection and looking under but when I get her in the air I will look harder.
They stock axles where replaced with ones rated up to 1000 hp. Still be able to help if needed? BTW thanks!!!!
__________________
In many cases this isn't even keeping up with the Jones's, this is Jonesing and just plain KEEPING UP!!!
|
10-10-2014, 12:51 PM | #4 |
Account Suspended
Drives: 2010 zr1 Camaro 2011 vert Join Date: Apr 2013
Location: everywhere
Posts: 1,121
|
Yes sir no problem. .980 521 0722 call anytime and we will figure out what we need to do.
|
10-10-2014, 12:57 PM | #5 |
Thx TZD.
Drives: 2010 Supercharged Custom Camaro Join Date: Oct 2008
Location: Michigan
Posts: 1,100
|
thank you
__________________
In many cases this isn't even keeping up with the Jones's, this is Jonesing and just plain KEEPING UP!!!
|
10-10-2014, 01:51 PM | #6 |
Account Suspended
Drives: 2010 zr1 Camaro 2011 vert Join Date: Apr 2013
Location: everywhere
Posts: 1,121
|
|
10-10-2014, 02:15 PM | #7 |
|
Does yours have the thrust washers? My 2010 didn't come with them and I had a clicking sound. Put some in and noise was gone.
|
10-22-2014, 03:59 PM | #8 |
Thx TZD.
Drives: 2010 Supercharged Custom Camaro Join Date: Oct 2008
Location: Michigan
Posts: 1,100
|
That's what it was. Dealer tried to tell me we didn't install them when I but the new axels in. I was not happy it cost me $$$ but its running great now.
__________________
In many cases this isn't even keeping up with the Jones's, this is Jonesing and just plain KEEPING UP!!!
|
|
|
|
|