07-31-2018, 01:24 PM | #85 | |
|
Quote:
No mine does not do this, its more of just normal straight driving and going over stuff, some times it does it and other times not. Tried replicating for a dealer, but at the time car would not do it :(.
__________________
|
|
07-31-2018, 01:59 PM | #86 | |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,607
|
Quote:
I don't know your technical ability but if you do not have access to a lift to examine things, then maybe you might want to invest in one of these. They have a price range depending on how much you want to spend. https://www.amazon.com/Steelman-9720.../dp/B00123J79O |
|
07-31-2018, 04:10 PM | #87 |
Drives: 1969 R/S Z28 302 m20 Endura Join Date: Sep 2009
Location: DFW
Posts: 432
|
I had a occasional RR clunk and found RR knuckle had a bad spherical upper joint took a cell video and I bought a used knuckle hub and parking brake/splash shield too about an hour to swap it. Justice Pete advised me to get it up on a lift and put a wrench on all bolts and when I did the toe arm it was easy to see
__________________
1969 RS Z/28 302
1969 Firebird LS6-6 speed TA clone 2015 Zl1 |
|
|
|
|