08-11-2013, 06:16 PM | #1 |
Drives: 2014 Z/28 # 89, 69 Camaro, 2013 ZL1 Join Date: Jul 2013
Location: Flint MI
Posts: 669
|
HD Driveline Components for ZL1
DESCRIPTION:
Chevrolet Performance announces the launch of the new "vehicle specific" Camaro ZL1 HD Driveline Kits to the Chevrolet Performance Parts program. Camaro ZL1 HD Driveline Kit(Manual Trans) Part Number: 22959394 MSRP: $ 4,500.00 Camaro ZL1 HD Driveline Kit(Automactic Trans) Part Number: 22959395 MSRP: $ 5,000.00 Features: ·Specialty components from the production Camaro ZL1 1.Larger and stronger 9.9 inch differential housing(cast iron) 2.Stonger Axles 3.Heavy Duty limited-slip differential ·Rear differential cooler - reduces temps in the differential by more than 100 degree F. ·Asymmetrical half-shafts - Offering different torsional stiffness rates(works with limited-slip diff., minimizing wheel hop) -60mm hollow shaft on the right -33mm solid shaft on the left ·Stronger ZL1 prop shaft GENERAL INFORMATION: The Camaro ZL1 HD Driveline Kit has been developed for the enthusiast that is looking to build an ultimate performance Camaro, 2010 and later. For use with either a manual or an automatic transmission, this unit delivers the strength required to put an enormous amount of power to the pavement! Last edited by serviceguy; 08-11-2013 at 07:41 PM. |
08-11-2013, 07:29 PM | #2 |
Drives: Camaro's, always have, always will. Join Date: Oct 2010
Location: Home of the brave
Posts: 4,851
|
...yes, they have been out for a while, upgrades for non ZL1 cars. Good stuff for those wanting to anty up with GM parts to back-up their horsepower game.
__________________
In Scott We Trust...all others must show proof.
|
08-11-2013, 10:05 PM | #3 |
Drives: 2014 ZL1m6 red hot #569 Join Date: Dec 2009
Location: florida
Posts: 2,422
|
how bout something we could actually use like a stage 2 or stage 3 factory kit that keeps our warranty
|
08-12-2013, 01:10 PM | #4 |
Danger Zone
|
+1
__________________
and when I say "Ultra-Grin" - I MEAN ULTRA GRIN! ~ fbodfather
|
08-12-2013, 01:27 PM | #5 |
Petro-sexual
|
It'll be cool to see if Z/28 components trickle down to similar kits later on, too.
__________________
'20 ZL1 Black "Fury" A10, PDR, Exposed CF Extractor Magnuson Magnum DI TVS2650R // RFBG // Soler 103 // TooHighPSI Port Injection // THPSI Billet Lid // FF // Katech Drop-In // PLM Heat Exchanger // ZLE Cradle bushings // BMR Chassis-Suspension Stuff // aFe Bars // Diode Dynamics LEDs // ACS Composites Guards // CF Dash // Aeroforce // tint // other stuffs |
|
|
|
|