11-10-2012, 12:03 PM | #155 |
Drives: 2013 2SS/RS L99 Join Date: Oct 2012
Location: Denham Springs La.
Posts: 811
|
60 ft/time: 1.843
Tire Brand/Type: Stock Pirelli P Zero Tire Size: 275/40/20 Suspension Upgrades: 2013 Stock Drivetrain Upgrades: Stock Automatic or Manual transmission: A6 Rear Gear Ratio: 3.27
__________________
2013 2SS/RS L99/A6 Crystal Red Metallic Tincoat 12.76@108.98mph Bone Stock
12.46@111.19mph with New Era CAI & U/D Pulley 12.12 @ 114.16 after Stainless Power headers and no tune yet on stock P-Zero's! 12.007@ 115.20 With 18" Drag Radials - 11.93 @115.19 Added a PTB 11.76 @116.59 With Yank SS3200 Converter - 11.63 @116.52 After PI and Tuning 11.44 @118.75 New Best 10.72 @127.93 after heads and Cam and Yank SS3600 |
11-11-2012, 07:52 PM | #156 |
|
Please update my drag radial time, everything is the same on the car.
60 ft/time: 1.390 Tire Brand/Type: M&H Drag Radials Tire Size: 325/45R17 Suspension Upgrades: Pfadts Trailing Arms, Diff Bushings, and Toe Rods Drivetrain Upgrades: JRE Posi-Mod, LPW rear cover, FTI 9.5 2800 Billet Torque Converter Automatic or Manual transmission: A6 Rear Gear Ratio: 3.45 Car 4742 in Left Lane
__________________
|
11-16-2012, 02:09 PM | #157 | |
Drives: 2010 1SS Join Date: Jan 2010
Location: Tampa, FL
Posts: 1,002
|
Quote:
|
|
11-16-2012, 03:17 PM | #158 | |
Annihilator
Drives: 2012 45th ERL-427 F1X Join Date: Aug 2011
Location: KY
Posts: 334
|
Quote:
__________________
ERL M3 Superdeck 427 Forged, Dragon Slayer Crank, Black Label Heads : ProCharger F1X Cog - Holley HighRam : Jakes4L80e CircleD - DSS 9" 1400 axles/shaft, BMR Suspension : Extreme Innovations 15 : Squash, Bosch 127lb FI : ALKY Twin Meth
|
|
11-16-2012, 08:07 PM | #159 | |
|
Quote:
__________________
|
|
11-23-2012, 12:05 PM | #160 |
Drives: 2013 2SS/RS L99 Join Date: Oct 2012
Location: Denham Springs La.
Posts: 811
|
Just wondering when you are going to update the list.
__________________
2013 2SS/RS L99/A6 Crystal Red Metallic Tincoat 12.76@108.98mph Bone Stock
12.46@111.19mph with New Era CAI & U/D Pulley 12.12 @ 114.16 after Stainless Power headers and no tune yet on stock P-Zero's! 12.007@ 115.20 With 18" Drag Radials - 11.93 @115.19 Added a PTB 11.76 @116.59 With Yank SS3200 Converter - 11.63 @116.52 After PI and Tuning 11.44 @118.75 New Best 10.72 @127.93 after heads and Cam and Yank SS3600 |
11-24-2012, 07:35 AM | #161 |
|
Not the proudest of this, it was the first time out on new build and slicks. A good place to start and hopefully improve.
DRAG SLICKS 60 ft/time: 1.721 Tire Brand/Type: Hoosier Slicks & M&H Front Skinnies on Weld wheels Tire Size: 28X10X17 Suspension Upgrades: BMR Rear Adjustable Lower Control Arms, BMR Trailing Arms and Bushings Drivetrain Upgrades: G-Force 9", Strange Pro-iron center section, RPM Level VI Trans, 4" Aluminum drive shaft and Triple Disc Street Slayer Carbon Clutch Automatic or Manual transmission: M6 Rear Gear Ratio: 3.89 Track Info: Mountain Park Dragway - Clay City, KY. Other slip 1.780
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
11-25-2012, 10:52 PM | #162 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
lethal racing
Car # 747 1.542 60' 2010 camaro BONE STOCK suspension Cam and heads, 465rwhp 17" Bogart drag wheels with Hoosier slicks @18psi PTC 3200 stall Stock gears |
11-26-2012, 09:06 AM | #163 |
Drives: 2010 1SS Join Date: Jan 2010
Location: Tampa, FL
Posts: 1,002
|
Oops, somehow I missed yours. Will get it updated this morning. Good placement btw!
Last edited by BMR guy; 11-26-2012 at 09:18 AM. |
11-26-2012, 09:11 AM | #164 |
Drives: 2010 1SS Join Date: Jan 2010
Location: Tampa, FL
Posts: 1,002
|
|
11-26-2012, 10:36 AM | #165 |
Drives: 2010 CAMARO. 10.04@133mph, 1.4 60' Join Date: Jul 2009
Location: Lafayette, Louisiana
Posts: 4,585
|
|
12-01-2012, 07:58 PM | #166 |
Drives: jewel red 2ss Join Date: Nov 2009
Location: NJ
Posts: 31
|
60' time: 1.868
60 ft/time: 1.868
Tire Brand/Type: Perelli P Zero Tire Size: 275/40R20 [B]Suspension Upgrades: stock [B]Drivetrain Upgrades: stock Automatic or Manual transmission: M6 Rear Gear Ratio: 3.45 Last edited by rt4t; 12-01-2012 at 08:25 PM. |
12-01-2012, 09:33 PM | #167 |
Drives: 2011 Camaro 2SS Join Date: Oct 2011
Location: Bridgewater, NJ
Posts: 373
|
2011 2SS/RS M6 with Headers, tune, Vmax ported TB, high flow cats, straight pipes, vararam intake and drag radials.
60 ft/time: 1.839 Tire Brand/Type: Nitto NT05r Tire Size: 305/45-R18 Suspension Upgrades: PFADT trailing arms & toe rods Drivetrain Upgrades: None Automatic or Manual transmission: Manual Rear Gear Ratio: Stock
__________________
|
12-02-2012, 03:51 AM | #168 |
|
This was my 2nd time out and 4th full pass on new build and slicks. Better than my last attempt . Hopefully I will improve on this when we can get more passes on the car.
DRAG SLICKS - Update 60 ft/time: 1.652 Tire Brand/Type: Hoosier Slicks & M&H Front Skinnies on Weld wheels Tire Size: 28X10X17 Suspension Upgrades: BMR Rear Adjustable Lower Control Arms, BMR Trailing Arms and Bushings Drivetrain Upgrades: G-Force 9", Strange Pro-iron center section, RPM Level VI Trans, 4" Aluminum drive shaft and Triple Disc Street Slayer Carbon Clutch Automatic or Manual transmission: M6 Rear Gear Ratio: 3.89 Track Info: London Dragway - London, KY.
__________________
LPE 417 - TVS2300 787 RWHP 759 Torque - Built by WWW.KYSPEED.COM
|
|
|
|
|