Red Magnuson/SLP TVS2300 plus extras - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CobraR · 07-02-2016, 10:01 PM

I am going to a procharger, so up for sale is my red magnuson tvs2300.

6200.00 OBO plus shipping and paypal fees

I dont always get notification from the site, so feel free to email me

ttnicolaisen@gmail.com

10k in this kit with all the upgrades.

Other than going to a 10 Rib kit, there are not any other upgrades available that I am aware of.

This is the kit SLP used on their 2011 ZL1, so the supercharger has ZL1 engraved in the side.

This kit on my car produced 736rwhp and 734rwtrq with the 3.2 pulley, heads and camshaft (Not the BTR stage 3)

The car in full weight, minus the drag wheels ran a 10.23@137.88

The kit has aproximetly 5k miles on it.

Only one track visit

Included with the Unit:

BTR Stage 3 pd camshaft with 900 miles on it. (Still in engine, will remove this coming week for pictures)
Innovators West overdrive 8 rib kit
Alternator pulley seems stuck, so including entire alternator with 10,850 miles on it
cogged over drive rear pulley kit (comes with stock 1:1 grooved pulleys also)
Modified fuel rail for cog kit
80lb Injectors
Ported lower that opens the supercharger at the intake ports
Ported intake snout to 102mm (also have unported original)
Lower supercharger spacers to reduce heat soak
Water/Ice tank. Replaced pump in tank last month
3.0 and 3.2 pulley
Heavy duty tensioner
Heat exchanger
All hose to connect water tank and supercharger to heat exchanger.

There are 2 air intakes. One I made out of a universal 5" kit and the one that came with the car.

including 3, 8 rib belts with the kit, one is without spacers, one for the 3.2 pulley and one for the 3.0 pulley and works on the 3.2 also
Also including one spare cog belt

Things that will be needed:

Will need 4 new bolts for the valley cover, the bolts rounded out.
Will need a crank pin kit
Will need a fuel pump booster or some type of fuel system
Will need on fuel injector connector adapter
There are holes for dual meth nozzles in the intake tubes. There are nozzles in one of the tubes.

07-02-2016, 10:01 PM	#1
CobraR Drives: 2010 2SS Join Date: Nov 2013 Location: Baltimore Posts: 124	Red Magnuson/SLP TVS2300 plus extras I am going to a procharger, so up for sale is my red magnuson tvs2300. 6200.00 OBO plus shipping and paypal fees I dont always get notification from the site, so feel free to email me ttnicolaisen@gmail.com 10k in this kit with all the upgrades. Other than going to a 10 Rib kit, there are not any other upgrades available that I am aware of. This is the kit SLP used on their 2011 ZL1, so the supercharger has ZL1 engraved in the side. This kit on my car produced 736rwhp and 734rwtrq with the 3.2 pulley, heads and camshaft (Not the BTR stage 3) The car in full weight, minus the drag wheels ran a 10.23@137.88 The kit has aproximetly 5k miles on it. Only one track visit Included with the Unit: BTR Stage 3 pd camshaft with 900 miles on it. (Still in engine, will remove this coming week for pictures) Innovators West overdrive 8 rib kit Alternator pulley seems stuck, so including entire alternator with 10,850 miles on it cogged over drive rear pulley kit (comes with stock 1:1 grooved pulleys also) Modified fuel rail for cog kit 80lb Injectors Ported lower that opens the supercharger at the intake ports Ported intake snout to 102mm (also have unported original) Lower supercharger spacers to reduce heat soak Water/Ice tank. Replaced pump in tank last month 3.0 and 3.2 pulley Heavy duty tensioner Heat exchanger All hose to connect water tank and supercharger to heat exchanger. There are 2 air intakes. One I made out of a universal 5" kit and the one that came with the car. including 3, 8 rib belts with the kit, one is without spacers, one for the 3.2 pulley and one for the 3.0 pulley and works on the 3.2 also Also including one spare cog belt Things that will be needed: Will need 4 new bolts for the valley cover, the bolts rounded out. Will need a crank pin kit Will need a fuel pump booster or some type of fuel system Will need on fuel injector connector adapter There are holes for dual meth nozzles in the intake tubes. There are nozzles in one of the tubes. Last edited by CobraR; 07-02-2016 at 10:27 PM.