using 2010-13ss borla axle back on 14-15 ss - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

matts86cam · 09-21-2018, 05:35 PM

Can anyone tell me the problems I will run into? It looks like (from the sales photos) the muffler to tips pipe might be at a different angle on the 13 ss from the 15 ss.

Coz3z3 · 09-21-2018, 07:34 PM

I would say that you are probably right since the whole rear changed in 14. I assume that the angles are probably slightly different. Couldn't tell you how much, but calling Borla on it might be the best answer for you.

zz430camaro · 09-21-2018, 08:19 PM

I would imagine if Borla has two different part numbers for the years then its different some how.

matts86cam · 09-21-2018, 09:15 PM

Already purchased it, anyone kmow for sure? Thanks for the replies guys.

rontammy0 · 09-21-2018, 09:25 PM

Quote:

Originally Posted by matts86cam

Already purchased it, anyone kmow for sure? Thanks for the replies guys.

I found this link with the part number...if you scroll down to the bottom it says this system fits 2010 to 2013. Im looking for another part number...do you have the part number of the exhaust you bought?

https://www.tdotperformance.ca/borla...EaArMQEALw_wcB

Here is a S type for a 2014 or 15...different numbers..plus you need to let us know if its an Atak or Stype you have.

https://www.borla.com/products/camar...rt__11849.html

matts86cam · 09-22-2018, 07:01 AM

It is an atak. Not sure of the part numbers, it is a used setup from another member. I will be driving 3 hrs to pick it up. I will lay it out under the car to see what it looks like and update this thread once I attempt to put it on.

zz430camaro · 09-22-2018, 07:51 AM

My guess would be that the exhaust tips may not be in the right position so you might have to re-work them.

matts86cam · 10-05-2018, 06:05 PM

The hangers lines up and the tips work fine. They are angled out a little bit but noone would ever think it didnt look right. The tips arent flush with the bumper cover but the uniformity between the two make it work and seem like a look you are going for. Cant speak about the rest of the Kit but the mufflers worked out fine.

09-21-2018, 05:35 PM	#1
matts86cam Drives: 1986 z28 and 2015 ss Join Date: Apr 2016 Location: 54650 Posts: 43 View My Garage	using 2010-13ss borla axle back on 14-15 ss Can anyone tell me the problems I will run into? It looks like (from the sales photos) the muffler to tips pipe might be at a different angle on the 13 ss from the 15 ss.

09-21-2018, 07:34 PM	#2
Coz3z3 Drives: 2015 Z/28, 2015 1LE Join Date: Feb 2017 Location: Nevada Posts: 583	I would say that you are probably right since the whole rear changed in 14. I assume that the angles are probably slightly different. Couldn't tell you how much, but calling Borla on it might be the best answer for you.

09-21-2018, 08:19 PM	#3
zz430camaro Drives: 2015 1LE Join Date: Oct 2015 Location: Cleveland, OH Posts: 1,485	I would imagine if Borla has two different part numbers for the years then its different some how.

09-21-2018, 09:15 PM	#4
matts86cam Drives: 1986 z28 and 2015 ss Join Date: Apr 2016 Location: 54650 Posts: 43 View My Garage	Already purchased it, anyone kmow for sure? Thanks for the replies guys.

09-22-2018, 07:01 AM	#6
matts86cam Drives: 1986 z28 and 2015 ss Join Date: Apr 2016 Location: 54650 Posts: 43 View My Garage	It is an atak. Not sure of the part numbers, it is a used setup from another member. I will be driving 3 hrs to pick it up. I will lay it out under the car to see what it looks like and update this thread once I attempt to put it on.

09-22-2018, 07:51 AM	#7
zz430camaro Drives: 2015 1LE Join Date: Oct 2015 Location: Cleveland, OH Posts: 1,485	My guess would be that the exhaust tips may not be in the right position so you might have to re-work them.

10-05-2018, 06:05 PM	#8
matts86cam Drives: 1986 z28 and 2015 ss Join Date: Apr 2016 Location: 54650 Posts: 43 View My Garage	The hangers lines up and the tips work fine. They are angled out a little bit but noone would ever think it didnt look right. The tips arent flush with the bumper cover but the uniformity between the two make it work and seem like a look you are going for. Cant speak about the rest of the Kit but the mufflers worked out fine.