Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vararam
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons


Reply
 
Thread Tools
Old 07-16-2014, 07:40 PM   #1
Cat988h
 
Cat988h's Avatar
 
Drives: Rally yellow 2011 Camaro 1SSRS
Join Date: Apr 2012
Location: Parksville Bc
Posts: 264
Valve seals

Hey guys I have the jannetty racing 470 cam kit installed in my LS3. Getting a puff of blue smoke on initial start up. I have narrowed it down to valve seals. I am going to replace the seals next week. My question for you guys is, my friend has some Comp cams Viton Steel jacket valve stem seals. They are .500 guide size and the part number is 511-16. He says they are for a ls1 but he thinks they are the same for the LS3. Does anybody know what the deal is with these seals? He said I could have them I just need to make sure they are the right ones before I tear into it.
__________________
ATI Super Damper, Katech C5R Chain, Jannetty 470 Comp Cam, Comp Valve Springs, Mellings Oil Pump, Manley Push Rods, Comp Tringion Upgrade, Cold Air Inductions Intake, 1-7/8 American Racing Headers w Cats, MBRP 3 Inch Exhaust, RX Catch Can, Eaton Tru Trac, 3.91 OEM, DSS Drive And Half Shafts, LPW Diff Cover,3 Inch Noweeds, Amsoil Z-Rod, Tuned by Jannetty Racing
Cat988h is offline   Reply With Quote
Old 07-16-2014, 09:52 PM   #2
That_Guy
 
That_Guy's Avatar
 
Drives: n/a
Join Date: Apr 2014
Location: USA
Posts: 301
Ls1 seals are the same
That_Guy is offline   Reply With Quote
Old 07-16-2014, 11:02 PM   #3
JCunningham


 
JCunningham's Avatar
 
Drives: 2017 2SS M6
Join Date: Jun 2013
Location: WNY
Posts: 5,716
511-16 are the right ones. 16 is the quantity. if you need your car up and running get a couple extras from a speed shop if they sell singles. 511 is the part number 16 is quantity so 511-1 is single.
__________________
real ZL1 wheels 285/305 Michelin Pilot Super Sports, Pray ported IM/TB, EFI Tuning Flex fuel kit, American Racing Headers 1 7/8" long system w/ cats H pipe to Hurst Flowmaster NPP mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, Hurst shifter
JCunningham is offline   Reply With Quote
Old 07-17-2014, 07:08 PM   #4
Cat988h
 
Cat988h's Avatar
 
Drives: Rally yellow 2011 Camaro 1SSRS
Join Date: Apr 2012
Location: Parksville Bc
Posts: 264
Thanks guys
__________________
ATI Super Damper, Katech C5R Chain, Jannetty 470 Comp Cam, Comp Valve Springs, Mellings Oil Pump, Manley Push Rods, Comp Tringion Upgrade, Cold Air Inductions Intake, 1-7/8 American Racing Headers w Cats, MBRP 3 Inch Exhaust, RX Catch Can, Eaton Tru Trac, 3.91 OEM, DSS Drive And Half Shafts, LPW Diff Cover,3 Inch Noweeds, Amsoil Z-Rod, Tuned by Jannetty Racing
Cat988h is offline   Reply With Quote
Old 07-17-2014, 07:26 PM   #5
JCunningham


 
JCunningham's Avatar
 
Drives: 2017 2SS M6
Join Date: Jun 2013
Location: WNY
Posts: 5,716
o if you dont already know use a 12mm deep socket if you dont have a tool to press them on. tap until you hear the noise get deeper. i have 14 extras as I damaged one on my 1st attempt. Use a metal hammer not a rubber one. My speed shop only has the 16 sets. Then what do I do when I get back. pop one on and forget to put the spring seat on 1st
__________________
real ZL1 wheels 285/305 Michelin Pilot Super Sports, Pray ported IM/TB, EFI Tuning Flex fuel kit, American Racing Headers 1 7/8" long system w/ cats H pipe to Hurst Flowmaster NPP mufflers. Full 1LE suspension, with BMR adjustable sway bars and links, Hurst shifter
JCunningham is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:10 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.