SS side badging - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Partick · 10-21-2009, 04:43 PM

Here's mine.

anthonybyram · 10-21-2009, 10:17 PM

These I believe were 2007-2008 Impala SS badges, dont have the part number but these are alittle larger than the grille and and trunk lid emblems that are on the Camaro but match the font.

Miamivette · 10-22-2009, 08:34 PM

Quote:

Originally Posted by Capstone

Here's my "SS" Side Badging on my IOM. The black vinyl inserts really set it off with the black stripes

Glad to see yours. I was undecided about putting white ones or black ones on my IOM. The black does look great.

guydon · 10-22-2009, 10:12 PM

I think I will take the "camaro" off and put the SS badges low I will let you know when I get pics

spectrepig · 02-28-2010, 10:36 AM

I did like the one red one, took off the camaro (wanted to switch to black, but the black letters are cheap looking). Was going to leave it plain, but found the large SS emblems. I love the look. Even my wife who don't really care about a car's look complimented me on them. Dealers have them for around $30. I am having my vinyl guy redo the color on the inside so it is orange to match my interior.

camaroMSUfan · 02-28-2010, 12:42 PM

where can u find the flag emblems?

JEFF2010SSMANUAL · 02-28-2010, 03:07 PM

They look nice, but I wish I could find side "SS" emblems that have the same shape as the C A M A R O block letters.

Onereign · 02-28-2010, 05:32 PM

My emblems are in the mail right now. Question is, since I have 8 coats of Zaino on my car, should I do anything to the area I'm going to install them on before sticking em on? Like make a Dawn/Water solution and wash the sealant below the Camaro logo off first?

spectrepig · 03-01-2010, 09:31 PM

I removed the "camaro" and added the large SS badges. I had my vinyl guy inlay orange over the red the badges came with to match my interior. I had all the SS badges inlayed as well.

The Enforcer · 03-01-2010, 09:42 PM

How was it removing the "CAMARO."
Is it just glued on or drilled?????

spectrepig · 03-01-2010, 09:54 PM

Just stuck with double sided tape. You just need a hair dryer to heat up the tape, some fishing line, and some goo-gone. Oh and some patience.

ttexxan · 03-01-2010, 10:19 PM

Something just doesnt look right for some reason with the SS there

JEFF2010SSMANUAL · 03-02-2010, 08:54 AM

Quote:

Originally Posted by Onereign

My emblems are in the mail right now. Question is, since I have 8 coats of Zaino on my car, should I do anything to the area I'm going to install them on before sticking em on? Like make a Dawn/Water solution and wash the sealant below the Camaro logo off first?

Dishsoap strips wax. Wipe with rubbing alcohol, dry well, heat-up a little with hair-dryer to car and emblem.

I AM speaking from experience. I HAVE de-badged several cars, and have re-badged several cars with 3M double sided red tape purchased at AutoZone.

Onereign · 03-02-2010, 10:14 AM

So the rubbing alcohol will be sufficient for removing the Zaino/providing a better surface for the badge to adhere to?

10-21-2009, 04:43 PM	#43
Partick Drives: 2010 Camaro 2SS Join Date: Aug 2009 Location: NorCal Posts: 958	Here's mine. Attached Images

10-21-2009, 10:17 PM	#44
anthonybyram Drives: 1972 Z28, torch red,454 Join Date: Apr 2009 Location: mexico,mo Posts: 562 View My Garage	These I believe were 2007-2008 Impala SS badges, dont have the part number but these are alittle larger than the grille and and trunk lid emblems that are on the Camaro but match the font. Attached Images

02-28-2010, 12:42 PM	#48
camaroMSUfan Drives: 2SS/RS Silver Ice Metallic Join Date: Dec 2009 Location: Philadelphia, Mississippi Posts: 117	where can u find the flag emblems? __________________ Mods: Borla S-type exhaust tinted windows Kicker CVR 10" subwoofer Planet Audio 400 watt amp Custom Built Box for amp/sub Cold Air Inductions C.A.I

03-01-2010, 09:31 PM	#51
spectrepig Drives: 2010 2SS/RS. Black w/ inferno orang Join Date: Dec 2009 Location: FL Posts: 45	I removed the "camaro" and added the large SS badges. I had my vinyl guy inlay orange over the red the badges came with to match my interior. I had all the SS badges inlayed as well. Attached Images

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
SS side badging	wstuarttn	Cosmetics and Lighting Modification Discussions	1	02-28-2010 10:58 AM
New autoblog review on the 2010 Camaro SS	linkwpc	5th Gen Camaro SS LS LT General Discussions	6	10-01-2009 07:46 PM
(UPDATED) Stainless Works exhaust and header systems!! (Tag's SS w/ HP #'s)	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	162	07-09-2009 06:39 AM
Just Drove a Black RS SS w/Cyber Stripes & 6MT	Fireball	5th Gen Camaro SS LS LT General Discussions	14	06-07-2009 09:27 PM
camaro ss or 06 vette?	Robin	5th Gen Camaro SS LS LT General Discussions	45	08-23-2008 05:10 PM

10-22-2009, 10:12 PM	#46
guydon Drives: 2010 Black SS Join Date: Oct 2009 Location: Lacey, WA Posts: 103	I think I will take the "camaro" off and put the SS badges low I will let you know when I get pics

02-28-2010, 10:36 AM	#47
spectrepig Drives: 2010 2SS/RS. Black w/ inferno orang Join Date: Dec 2009 Location: FL Posts: 45	I did like the one red one, took off the camaro (wanted to switch to black, but the black letters are cheap looking). Was going to leave it plain, but found the large SS emblems. I love the look. Even my wife who don't really care about a car's look complimented me on them. Dealers have them for around $30. I am having my vinyl guy redo the color on the inside so it is orange to match my interior.

02-28-2010, 03:07 PM	#49
JEFF2010SSMANUAL JEFF2010SSMANUAL Drives: IOM 2SS/RS LS3 Join Date: Aug 2008 Location: Northern IL Posts: 1,953	They look nice, but I wish I could find side "SS" emblems that have the same shape as the C A M A R O block letters.

02-28-2010, 05:32 PM	#50
Onereign Detailing Addict Drives: 2SS/RS LS3 CGM Join Date: Nov 2009 Location: Bossier City, LA Posts: 135	My emblems are in the mail right now. Question is, since I have 8 coats of Zaino on my car, should I do anything to the area I'm going to install them on before sticking em on? Like make a Dawn/Water solution and wash the sealant below the Camaro logo off first?

03-01-2010, 09:42 PM	#52
The Enforcer Drives: 2 door Join Date: Sep 2009 Location: the OC-A.H. Posts: 78	How was it removing the "CAMARO." Is it just glued on or drilled?????

03-01-2010, 09:54 PM	#53
spectrepig Drives: 2010 2SS/RS. Black w/ inferno orang Join Date: Dec 2009 Location: FL Posts: 45	Just stuck with double sided tape. You just need a hair dryer to heat up the tape, some fishing line, and some goo-gone. Oh and some patience.

03-01-2010, 10:19 PM	#54
ttexxan Drives: 2010 Camaro SS/RS Join Date: Oct 2009 Location: Fort Worth Texas Posts: 926	Something just doesnt look right for some reason with the SS there

03-02-2010, 10:14 AM	#56
Onereign Detailing Addict Drives: 2SS/RS LS3 CGM Join Date: Nov 2009 Location: Bossier City, LA Posts: 135	So the rubbing alcohol will be sufficient for removing the Zaino/providing a better surface for the badge to adhere to?