02-07-2017, 02:58 PM | #1 |
|
Maryland dyno tune
I'll be doing a cam install soon and was going to get a dyno tune after it but wondering the best place around for a tune. Thanks
__________________
2010 Black 2LT/RS - Injen CAI, ARK DTS Catback Polished Tips, OBX LT Headers, Lowered on Eibach, 3/8 blackiceolator, Trifecta Tuned.- Totaled 3/10/13
2010 Black 2SS/RS - Stainless powers 1 7/8 LT headers, cold air inductions cai, Tuned by dynosteve, Feesler side skirt, Feesler Spoiler, Feesler carbon fiber bowties, H&R Lowering Springs. |
02-07-2017, 03:04 PM | #2 |
Drives: 2013 1LE Join Date: Mar 2013
Location: maryland
Posts: 796
|
There are MANY shops in the area and just a bit of a drive.
RPM in Delaware - Fran will comment soon probably. They did the cam and tune in my CTSV1. HPA in Delaware CSP in Philly Rick Crawford in South Carolina. Im in a similar boat and trying to decide myself.
__________________
|
02-07-2017, 04:02 PM | #3 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
dynoSteve can remote tune the car for a cam and a couple of trips to the drag strip will give approx power info...IMHO if and/or when I go FI is when a dyno tune is a must....
too bad local shops don't have an occasional "dyno Saturday"...get enough people to spread the cost...dreamin.....peace out
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
02-07-2017, 04:50 PM | #4 |
|
__________________
Instagram @orange_maro_
|
02-07-2017, 05:12 PM | #5 |
Drives: 1LE Join Date: May 2015
Location: California
Posts: 267
|
Heard about Broadview autos in Warrenton from the forums, never experienced them personally
|
02-07-2017, 05:21 PM | #6 |
|
There was a dyno day a while back a few years ago when I have my v6 at t&t performance. But I would rather get t on a dyno and do it maybe I'll talk to dynosteve and see if he can do a remote dyno tune
__________________
2010 Black 2LT/RS - Injen CAI, ARK DTS Catback Polished Tips, OBX LT Headers, Lowered on Eibach, 3/8 blackiceolator, Trifecta Tuned.- Totaled 3/10/13
2010 Black 2SS/RS - Stainless powers 1 7/8 LT headers, cold air inductions cai, Tuned by dynosteve, Feesler side skirt, Feesler Spoiler, Feesler carbon fiber bowties, H&R Lowering Springs. |
02-07-2017, 05:38 PM | #7 |
|
JE Import Performance - Copied directly from their site
Standard Dyno Testing 2wd $90 4wd/AWD $120 * Includes setup on dyno and three runs with color dyno graph printout 2WD with 02 $110 4WD/AWD with 02 $140 * Includes same as above with Air Fuel ratio readings Dyno Tuning 2WD $190 4WD/AWD $265 * Custom tuning by the hour Dyno Rental Bring your own tuner (restrictions apply) First Hour & Hookup: 2WD $100.00 4WD/AWD$150.00 Each Additional Hour 2WD $75.00 4WD/AWD $100.00 All Day Rental (9am – 5pm) 2WD $575.00 4WD/AWD $750.00 If tuning multiple cars with dyno rental either by the hour or all day you will be subject to a set up fee per car after the first car. 2WD $25 per car 4WD/AWD $40 per car
__________________
Instagram @orange_maro_
|
02-07-2017, 09:32 PM | #8 |
Drives: 2013 ZL1 Join Date: Jan 2017
Location: Fort Myers, FL
Posts: 101
|
Moore Automotive in Fairfax, VA. The tuner has a CTS-V, and is really good. 703-352-3535
|
02-08-2017, 05:52 AM | #9 |
8.60 @ 157 @ 4200lbs
|
Broadview auto in warrenton va
https://www.facebook.com/BroadviewAutoService/ |
02-09-2017, 01:06 PM | #10 |
Res Ipsa Loquitur
Drives: 2013 Camaro SS Vert Supercharged Join Date: Sep 2012
Location: Southern Maryland
Posts: 726
|
Maryland Speed held a dyno tune day with Andrew from Complete Street Performance. Maryland Speed is right down the street from me in Southern Maryland so I went there to have Andrew tune my car. I originally had a remote tune from Jannetty Racing, which was good as well. However, Andrew was amazing and it was great to get the car on the dyno and have it tuned in person. Andrew also tunes your car on the street. After the dyno tune, he takes it out on the street and tunes it further, if necessary. Couldn't be happier.
__________________
"STREET LEGAL" 2013 Camaro 2SS/RS LS3 Convertible -- 2.9l Whipple Supercharger, CDC SportBar, Cordon CR-1 and MRR M017 wheels, Hex Vents, RPI ZL1 Splitter, CAI, Pfadt Tri-Y Headers, high-flow cats, ZR1 3 bar map sensor, ZL1 fuel pump, 3.875" pulley, ADM FPCM, 1LE PCV Oil Separator Kit, Elite Catch Can, APEX scoop and washer bottle relocation kit, Hotchkis lowering springs, BMR sways, BMR toe rods, BMR trailing arms, 620 rwhp, 564 rwtq, and tuned by Andrew Zurick of Complete Street Performance by way of Maryland Speed.
|
02-12-2017, 09:11 AM | #11 |
Drives: 96SS Join Date: May 2009
Location: New Castle Delaware
Posts: 1,948
|
Feel free to give us a call or stop by the shop. We will get you taken care of. We do a ton of cars from MD
|
02-12-2017, 02:44 PM | #12 |
Drives: 2010 2SS LS3 Join Date: Jun 2016
Location: Active Duty Military
Posts: 54
|
T&T performance Frederick, MD
I am getting all of my work done at T&T performance in Frederick, MD. Tim is straight forward and has a lot of experience. When you pull up and see nothing but Camaro's outside...you know you are in the right place. Lots of other good places in and around MD, but I can only speak personally of this one.
__________________
LT headers (SW 1 7/8 with high flow cats),
Borla ATAK cat back exhaust CAM (BTR stage 3 blower cam with all supporting mods Lifters, push rods, springs, head bolts, LS2 Timing chain, sprocket, Melling high performance oil pump, gaskets SC (SLP TVS2300), Black wing CAI (designed for SLP SC) JRE super tensioner Fuel system (ZL1pump/ADM control module/ID850 injectors) wheels/tires NGK TR7IX plugs MSD wires ZR1 3 bar map sensor 160° thermostat Crank pin kit |
02-18-2017, 06:37 PM | #13 |
Drives: 2010 Camaro 2SS/RS Join Date: Jan 2012
Location: dunkirk,Maryland
Posts: 99
|
I'm also looking for a tuner in Maryland with extensive experience with tuning turbo Camaros... stock bottom and I am installing a Huron speed single turbo system. I have fic850cc injectors a ZL1 fuel pump and adm fpcm. Looking for a drivable tune not looking for max power. Any more tips will be greatly appreciated
|
02-21-2017, 06:46 AM | #14 |
Drives: LSx Powered Join Date: Oct 2009
Location: 19804
Posts: 448
|
Feel free to give us a call/email and we can get your setup dialed in.
|
|
|