05-23-2015, 11:28 PM | #1 |
Drives: 2012 ZL1 #1304 Join Date: Aug 2013
Location: Superior, WI
Posts: 17
|
Key recall/Computer failure
So I brought my car in for the key recall today and wasn't expecting what happened next. I go to leave the dealership and start the car, then a reduced power and stabilitrak code pops up and all the warning lights come on. Unreal! According to the dealership they have to put a whole new computer in it. I might get it back in a week. LOL Anyway, here's another concern. I just had headers, ported throttle body and catch can installed. Any possible way that could have caused this? I drove it for a good four to five hours the night before with no issues at all.
|
05-24-2015, 12:01 AM | #2 | |
Captain Gingerbeard
Drives: 2012 IOM RS/SS 6MT Join Date: Feb 2013
Location: West Twin Cities, MN
Posts: 2,489
|
If you're tuned, probably.
__________________
Custom ordered 2012 6MT RS/SS on 11/25/2011. Picked up 01/31/12.
Pedders Coilovers, BMR trailing arms and toe-links, Prothane solid poly subframe bushings, JDP Motorsports rear upper control arm bushings, Texas Speed long-tube headers with 2" primaries, modified fully 3" Magnaflow competition catback. CAI cold-air intake. DBA rotors, Hawk pads. Quote:
|
|
05-24-2015, 01:15 AM | #3 |
Drives: 2012 ZL1 #1304 Join Date: Aug 2013
Location: Superior, WI
Posts: 17
|
No tune.
|
05-24-2015, 11:59 AM | #4 |
KaBoom1701
Drives: 13' ZL1 Red M6 Join Date: Dec 2012
Location: I.E. SoCal (Yucaipa)
Posts: 8,630
|
I'd remove all that stuff before the dealer realizes you have them install and voids your warranty.
__________________
Mods:
Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats. |
05-25-2015, 01:41 AM | #5 | |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Quote:
My ZL1 is highly modified and just had the ECM replaced under warranty. Curious to know what the outcome is Kylet
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
|
05-25-2015, 01:42 AM | #6 | |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Quote:
How many miles on you ZL1? How long have the mods been done , and were they done all at the same time?
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
|
05-25-2015, 01:50 AM | #7 |
Drives: 2012 ZL1 #1304 Join Date: Aug 2013
Location: Superior, WI
Posts: 17
|
I have 3900 miles on it. I did the cold air intake two years ago. I just did the headers, throttle body and catch can on Friday. Brought it in on Saturday for the key recall. They told me the keys were reprogrammed and good to go. I went to leave and that's when all those warnings came up. So they brought it back in the shop and the tech told me they had to replace the ECM. He said it was shot.
|
05-25-2015, 12:19 PM | #8 | |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Quote:
They can still read the CODES that caused the failure.. Call them tomorrow and ask them to provide you all the codes before they remove the current ECM.. insist on it! I have the ECM replaced 2 times in past 13 months, and they still can't explain why the ECM fails....... I have 17500 miles..
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 Last edited by thespymaster; 05-26-2015 at 02:50 PM. |
|
05-26-2015, 01:26 AM | #9 | |
Drives: 2012 ZL1 #1304 Join Date: Aug 2013
Location: Superior, WI
Posts: 17
|
Quote:
I will call them first thing in the morning. Did they tell you what caused your ECM failure? The one tech mentioned "those headers get pretty hot and coulda fried the ECM. The manifolds at least have a heat shield." That was exactly quoted what he said to me. LOL This is the type of guy I'm dealing with. I'm thinking they may try to somehow blame me for it. I do know one of the service writers and a couple managers there I will talk to as well. Thanks for the info and help on this. It has been very frustrating to say the least. |
|
05-26-2015, 06:48 AM | #10 |
Drives: 2021 300 Join Date: Jan 2015
Location: New Jersey
Posts: 968
|
ECM failure quite common on ZL1's mine died at 5700 GM replaced it. Tech told me the 2 ZL1's they sold they replaced both ECM's.
|
05-26-2015, 02:19 PM | #11 |
My ECM was replaced a couple months ago. Car wouldn't start at times and then the next day I would go to start it and it would start right up. This happened a few times. They replaced other modules then finally this one and so far it seems to be working.
__________________
|
|
05-26-2015, 02:48 PM | #12 | |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Quote:
Plenty of NON-modded 5th Gen's that have had the ECM replaced with no explanation as why the ECM failed.. It's my belief GM is fully aware of this issue with the ECM failures.
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
|
05-26-2015, 02:49 PM | #13 | |
Drives: C7 / ZL1 / SS / trucsk Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,533
|
Quote:
Too many failures of the ECM and you can't tell me GM isn't aware of it...
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS 2012 Camaro ZL1 - 850 HP 2015 GMC Denali 3500HD 4x4 2012 GMC Sierra 3500HD 4x4 |
|
05-27-2015, 05:29 AM | #14 |
Drives: 2012 ZL1 #1304 Join Date: Aug 2013
Location: Superior, WI
Posts: 17
|
Yeah I'm not falling for the header bs. I seriously think I know more about that car than the tech does. LOL I know there aren't many in my area but you would think he would know something about a ZL1. The way he was talking to me sounded like he never heard of one or seen one before.
|
|
|
|
|