05-30-2012, 12:42 PM | #1 |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
Can anyone that owns this give me a review?
As the title says I am considering purchasing this fuse box Cover but I would like to know what you guys that have one have to say about it.
Thanks for the help. http://autoagenda.com/catalog/2010-c...se-relay-cover Edit: sorry mods didn't realize i was the general section. Sorry if this should have been in Cosmetics and lighting section. |
05-30-2012, 12:45 PM | #2 |
Drives: 10 ABM 1SS/00 Z28 Conv/14 SumWh 2LT Join Date: Apr 2009
Location: Kingston, ON
Posts: 960
|
Which cover. You don't have a link?
__________________
1 SS/RS 6Sp White Rally Stripes
|
05-30-2012, 12:47 PM | #3 |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
|
05-30-2012, 12:57 PM | #4 |
Drives: 10 ABM 1SS/00 Z28 Conv/14 SumWh 2LT Join Date: Apr 2009
Location: Kingston, ON
Posts: 960
|
Can't help you out on that one. I have the carbon fiber cover from Ohio speed. I am sure someone will chime in for you. Good luck.
__________________
1 SS/RS 6Sp White Rally Stripes
|
05-30-2012, 02:00 PM | #5 |
TRI COUNTY TAMPA
Drives: 2011 1SS/RS VR/BLK A6 Join Date: Jan 2011
Location: Trinity, Florida
Posts: 6,277
|
I have it. Works fine. Just sticks onto top of cover with 3m tape. Mine has been on for about 16 months with zero issues. Mine was free with my custom valve covers. Wouldn't say i'd pay for it but it's fine and painted well.
$70-$120 is insane for what this is. The ONLY way i'd recommend is if you have the matching rotofab covers. All it is is a piece of aluminum painted on the top and held on with 2 pieces of 3m. Be better off buying their covers when they run a freebie special and taking that item for free.
__________________
Last edited by daveagogo1; 05-30-2012 at 02:12 PM. |
05-30-2012, 02:23 PM | #6 | |
Emerald Coast Camaros
Drives: 2010 Camaro 2LT/RS M6 Join Date: Nov 2009
Location: Tallahassee FL
Posts: 9,687
|
Quote:
Figured it was like that. For 70 bucks I can probably get a pretty nice paint job done or have some fun doing it myself. I'm mainly looking for something to spice up the engine bay in my 2LT that won't break the bank because some of those polished accessories and others like it can go for a lot of money. |
|
05-31-2012, 12:28 AM | #7 |
INFECTED
Drives: 2011 1LT Synergy Green Join Date: May 2011
Location: Upstate PA
Posts: 3,226
|
Check out pete's work , the cost is well worth it and great work .. We have a 1LT and it makes the engine bay look great .
http://showstopperaccessories.com/
__________________
|
05-31-2012, 12:39 AM | #8 |
Drives: 2018 Hot Red ZL1 Join Date: Nov 2010
Location: Los Angeles, CA
Posts: 3,599
|
you can do it yourself.. it is so easy.. All you need is adhesion promoter, primer, base color and clear coat. Pick your color which I would guess yellow and apply. I sanded the fuse box with 1500 grit sandpaper. it doesnt do much but still help. then spray 2-3 adhesion promoter coats. Spray 2-3 primer coats. 2-3 base color coats. finally, 2-3 clearcoat coats. and boom. you got urself a great project. buy good products thou. I used duplicolor for my white and I am not very happy about it. You can even use the same materials for the engine cover. just buy green automotive masking tape. the green tape and mask whatever you dont want. and while your at it, hit your intake if you have one. I did all three in the past two days.. Will post pic later. if you need more advice or help, PM me.
__________________
|
|
|
|
|