9.55 Lower pulley belt size - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BEECHFRONT · 06-07-2017, 11:45 AM

I have a 9.55 lower pulley with stock upper and lingenfelter relocation bracket.

Belt size on the chart calls for K080685 and I installed it and there is no slack at all on the tensioner, very tight.

Anyone else use this belt?

ABADZL1 · 06-07-2017, 04:27 PM

I have found the lingenfelter belt chart totally useless when it comes to belt sizes. It was no where close when I did a 9.55 lower. You will just have to figure out which length works. I ended up using a K080702.

BEECHFRONT · 06-07-2017, 05:07 PM

The chart floating around on this site is where I got the belt info K080685 for 9.55 and stock upper

I just found the same chart with the LINGENFELTER name on it and it calls for a different belt K080690 looks like it's 1/2" bigger

ZMEnow · 06-07-2017, 05:31 PM

Quote:

Originally Posted by BEECHFRONT

The chart floating around on this site is where I got the belt info K080685 for 9.55 and stock upper

I just found the same chart with the LINGENFELTER name on it and it calls for a different belt K080690 looks like it's 1/2" bigger

I Ran into this also and found out the chart has been updated.

ABADZL1 · 06-07-2017, 05:52 PM

The update is still wrong. For me anyway. The chart should have a disclaimer to say approximate.

06-07-2017, 11:45 AM	#1
BEECHFRONT Drives: 2013-ZL1, 69-Z28, 71-CHEVELLE SS Join Date: Oct 2016 Location: South Jersey Posts: 268	9.55 Lower pulley belt size I have a 9.55 lower pulley with stock upper and lingenfelter relocation bracket. Belt size on the chart calls for K080685 and I installed it and there is no slack at all on the tensioner, very tight. Anyone else use this belt? __________________ 2017 C7 Z06 2013-ZL1 2017 HELLCAT SOLD 2019 HELLCAT REDEYE WB 69-Z28, LSA SWAP, T56 MAGNUM 71-CHEVELLE SS, 496 STROKER TH400

06-07-2017, 04:27 PM	#2
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,670 View My Garage	I have found the lingenfelter belt chart totally useless when it comes to belt sizes. It was no where close when I did a 9.55 lower. You will just have to figure out which length works. I ended up using a K080702. __________________ GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs

06-07-2017, 05:07 PM	#3
BEECHFRONT Drives: 2013-ZL1, 69-Z28, 71-CHEVELLE SS Join Date: Oct 2016 Location: South Jersey Posts: 268	The chart floating around on this site is where I got the belt info K080685 for 9.55 and stock upper I just found the same chart with the LINGENFELTER name on it and it calls for a different belt K080690 looks like it's 1/2" bigger __________________ 2017 C7 Z06 2013-ZL1 2017 HELLCAT SOLD 2019 HELLCAT REDEYE WB 69-Z28, LSA SWAP, T56 MAGNUM 71-CHEVELLE SS, 496 STROKER TH400

06-07-2017, 05:52 PM	#5
ABADZL1 ZL1 Pilot Drives: 2013 ZL1 Join Date: Apr 2014 Location: TN Posts: 1,670 View My Garage	The update is still wrong. For me anyway. The chart should have a disclaimer to say approximate. __________________ GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs