Dyno Results - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

-Trigger- · 03-20-2011, 10:50 PM

Here Finally got it done but looks like ill need to start adding to it. But i'm not sure why it dyno'ed so low I know I made a 2.5 hour drive to get to ABQ so im not sure.
Stock 9,000 miles
LS3

Lu · 03-20-2011, 10:52 PM

What are your mods? L99 or LS3?

Lu

Lu · 03-20-2011, 11:06 PM

I think your numbers are right on par for being a stock LS3 on Motiva's mile hile dyno. You made more HP then my 2011 L99 on the same dyno. I made 330 something and 350 tq, that is with a cold air intake, CNC Throttle body. center resonator removed and x pipe installed, mufflers removed.

I don't think you dynoed that low, you did get some good baseline numbers. now start modding!

-Trigger- · 03-20-2011, 11:09 PM

Well did a Muffler delete Video somewhere here but got planes for CAI, LT, CAM and Ported TB

Lu · 03-20-2011, 11:31 PM

and obviously your plans will include a tune... with all that, should dyno over 400hp easily...

Ivan @ Southwest Speed · 03-21-2011, 12:50 AM

DT LTs
Catback
AFE Intake
Daves Base Tune

412.17 rwhp all day long.

Done half a dozen LS3s just like that with those same results.

Like Lu said, the Dyno isn't really so much a Trophy Hunt, but more of a ruler to measure what you do and how far ya go.

You're on your way already! That's a hell of a lot more than alot of people.

Ivan

03-20-2011, 10:50 PM	#1
-Trigger- USER Drives: 1SS, 1968 Camaro V8 396 Join Date: Jun 2010 Location: Farmington, NM Posts: 163	Dyno Results Here Finally got it done but looks like ill need to start adding to it. But i'm not sure why it dyno'ed so low I know I made a 2.5 hour drive to get to ABQ so im not sure. Stock 9,000 miles LS3 Attached Images __________________ This Car Hauls A$$ I know I weight (295 now) 315 and it still gets it on

03-20-2011, 10:52 PM	#2
Lu Drives: 2006 GTO Join Date: Aug 2010 Location: NM Posts: 111	What are your mods? L99 or LS3? Lu __________________ Sweet Maybellene...... 571 RWHP - 11.44@122mph at a DA of 6500ft

03-20-2011, 11:06 PM	#3
Lu Drives: 2006 GTO Join Date: Aug 2010 Location: NM Posts: 111	I think your numbers are right on par for being a stock LS3 on Motiva's mile hile dyno. You made more HP then my 2011 L99 on the same dyno. I made 330 something and 350 tq, that is with a cold air intake, CNC Throttle body. center resonator removed and x pipe installed, mufflers removed. I don't think you dynoed that low, you did get some good baseline numbers. now start modding! __________________ Sweet Maybellene...... 571 RWHP - 11.44@122mph at a DA of 6500ft

03-20-2011, 11:09 PM	#4
-Trigger- USER Drives: 1SS, 1968 Camaro V8 396 Join Date: Jun 2010 Location: Farmington, NM Posts: 163	Well did a Muffler delete Video somewhere here but got planes for CAI, LT, CAM and Ported TB __________________ This Car Hauls A$$ I know I weight (295 now) 315 and it still gets it on

03-20-2011, 11:31 PM	#5
Lu Drives: 2006 GTO Join Date: Aug 2010 Location: NM Posts: 111	and obviously your plans will include a tune... with all that, should dyno over 400hp easily... __________________ Sweet Maybellene...... 571 RWHP - 11.44@122mph at a DA of 6500ft

03-21-2011, 12:50 AM	#6
Ivan @ Southwest Speed Drives: '15 Z06, '01 NBM SS, '97 SS Join Date: May 2009 Location: Rio Rancho, NM Posts: 12,170	DT LTs Catback AFE Intake Daves Base Tune 412.17 rwhp all day long. Done half a dozen LS3s just like that with those same results. Like Lu said, the Dyno isn't really so much a Trophy Hunt, but more of a ruler to measure what you do and how far ya go. You're on your way already! That's a hell of a lot more than alot of people. Ivan

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Texas Speed Long Tubes & Rumbler 5 Cat-Back Dyno Results!	Trevor @ Texas Speed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	48	12-08-2018 02:37 AM
V6 Dyno results collection	HannoverFist	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	42	02-01-2011 06:01 PM
Scrming's Airaid and Injen Dyno results...	scrming	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	212	06-28-2010 03:28 PM
Magnuson install at RPM motors dyno results	tlamb2	Forced Induction - V8	8	04-06-2010 07:32 PM
Dyno proven results from bolt-ons to L99	Bowtie Junkman	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	0	03-29-2010 04:12 PM