06-14-2012, 10:27 AM | #1 |
Drives: 2012 ZL1, 2009 CTS-V Join Date: Jun 2011
Location: Staging Lanes
Posts: 463
|
Minor bolt-ons, 601 RWHP
With the next phase of testing, we have these results to share. Our ZL1 just made 601 RWHP with the KDi ported blower, NW102 TB, New Era intake and 2.5" supercharger pulley and KDi heat exchanger on 93 octane.
We plan to put the DR's on, retune on better fuel and makes a few passes within a week. Once those numbers are logged we will be installing ported stock heads, AR headers, TS29 cam and lower pulley kit. Based on how this project is progressing, we expect very good numbers, even in the July heat. |
06-14-2012, 11:57 AM | #2 |
Drives: 2023 Black ZL1 Auto Join Date: Oct 2009
Location: FEMA Region 4
Posts: 2,934
|
Those are impressive numbers for bolt-ons! Looking forward to the upcoming ones too! What was the torque number?
|
06-14-2012, 12:12 PM | #3 |
Drives: 2013 ZL1 Join Date: Oct 2011
Location: tangent or
Posts: 2,984
|
I want to see what this setup runs on stock tire. this is kind of the mod package i am looking at but I am not going to drive around on DR all the time.
__________________
shopping for 2017+1le or zl1
2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned |
06-14-2012, 12:30 PM | #4 |
Drives: Dream Cars in my head Join Date: Apr 2008
Location: 808
Posts: 1,290
|
__________________
Wishful thinking...but I sure can dream big. |
06-14-2012, 12:31 PM | #5 |
Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 567
|
Keep us posted!
|
06-14-2012, 12:56 PM | #6 |
Drives: 2012 ZL1, 2009 CTS-V Join Date: Jun 2011
Location: Staging Lanes
Posts: 463
|
It barely hooked at all with no mods. We will only run this setup on the DR since it will go up in smoke without. We have an extra set of wheels for this.
|
06-14-2012, 01:17 PM | #7 |
ZL1 #140
Drives: Camaros: 68 SS, 10 2SS/RS, 12 ZL1 Join Date: Mar 2008
Location: Arizona
Posts: 594
|
Nice work guys. Put me in line for your blower porting!
|
06-14-2012, 02:00 PM | #8 |
Drives: mustangs Join Date: Apr 2012
Location: va
Posts: 87
|
THIS, Is what I have been wanting to see. Anybody can throw a catalog worth of parts at a car and get it to run good so it's good to see you doing like this. I'm looking forward to see how it runs like this with some tires on it.
When you say ported blower ,do you mean the blower its self and the outlet? or just the intake part? I had an 03 Cobra so when people say ported blower I think they are talking about the outlet also. Good luck at the track. Mid 10s? |
06-14-2012, 02:53 PM | #9 |
Drives: 2012 ZL1, 2009 CTS-V Join Date: Jun 2011
Location: Staging Lanes
Posts: 463
|
We are looking for 10:35-10:40. We took it easy on the intake only pass and ran a 11:47. On good gas we will be up over 100 RWHP from that run and a lot more torque under the curve. We are also running lighter wheels now like everyone else running good times with these cars.
We expect to break the record and do it on DR's with everything complete. For the ported blower, we spend 30 hours on them getting the most out of each one. The case and front drive are completely shaped and ported and welded up where required. We also opened this one up to a 102mm inlet. |
06-14-2012, 02:54 PM | #10 |
Drives: 2012 ZL1, 2009 CTS-V Join Date: Jun 2011
Location: Staging Lanes
Posts: 463
|
|
06-14-2012, 03:00 PM | #11 |
Drives: 2016 corvette Z06 Join Date: May 2009
Location: Raleigh, NC
Posts: 236
|
Good job keith and Damon. Keep up the good work.
I hope you ready to test it out in Mexico when u bring it back
__________________
2016 A8 Z06
CAI,E85,lower pulley 650rwhp/720tq |
06-14-2012, 09:58 PM | #12 |
ZL1 #140
Drives: Camaros: 68 SS, 10 2SS/RS, 12 ZL1 Join Date: Mar 2008
Location: Arizona
Posts: 594
|
Email sent. I'm going to need KD Innovations emblems on my car by the time I'm done with all your upgrades!
|
06-14-2012, 10:00 PM | #13 |
|
Awesome Numbers , Chevy Power
__________________
Jannetty Racing JRE Street Package
|
06-14-2012, 10:10 PM | #14 | |
|
Subscribed.
__________________
Quote:
|
|
|
|
Thread Tools | |
|
|