09-22-2019, 06:27 PM | #1 |
Drives: 2015 Camaro 2LT RS Join Date: Aug 2017
Location: Honolulu
Posts: 45
|
Want to go lower!
Hi guys!
I have a 2015 2LT V6 that currently has the GM GFX kit and BMR 1.25” lowering springs, and I would like to close up the fender/tire gap. What set up would you recommend to go lower? How much lower can I realistically go as it’s my daily driver? Any recommendations are appreciated! Last edited by Keoni068; 09-22-2019 at 06:42 PM. |
09-22-2019, 09:14 PM | #2 |
Drives: 2010 Inferno Orange 2SS/RS Join Date: Apr 2010
Location: Clermont, IN
Posts: 3,297
|
You are pretty much at the limit before you start affecting other suspension parts. Did you have bushings timed/clocked when the springs were installed?
__________________
2010 Inferno Orange 2SS/RS M6 Black Leather, Sun Roof, OBX Headers, Borla touring axle back, Cold Air Inductions CAI , non synthetic fluids, BMR total bushing upgrade/1" lowering springs, DSE 32mm rear sway bar. GM fe4 shocks/struts/LCA's, AAM 3.91 diff, Vertini RFS1.8 20x9 +30. Conti ExtremeContact Sport 275/35/20. sjm autoprod ABL dash kit. Mike Norris tuned 413/419.
Avenging Orange: 43 years of not buying into the Hype........and damn proud of it!! https://youtu.be/9JD9it6SmB8 https://youtu.be/xmelTlEzI34 KICKING CANCERS ASS SINCE 2015!! |
09-22-2019, 09:18 PM | #3 |
Drives: 2015 Camaro 2LT RS Join Date: Aug 2017
Location: Honolulu
Posts: 45
|
Thanks! Yes, they were timed when I got aligned. If I go coilovers can I get over a 2” drop?
|
09-23-2019, 11:45 AM | #4 | |
Drives: 2015 Z/22 Join Date: Aug 2015
Location: Ontario, Canada
Posts: 931
|
Quote:
Of course, there are ways around these factors such as a bump steer kit, adjustable suspension arms, coilovers with remote oil canisters, camber/caster plates, etc.
__________________
Overkill/Self Tuned; Mace Camshafts; K&N Typhoon Cold Air Intake; Ported 80mm Throttle Body/Intake Manifolds/Manifold Spacer; Solo Performance High-Flow Cats, Cat-back Exhaust; Vitesse Motorsports Throttle Controller; Elite Engineering E2 Catch Can; BC Racing BR Coilovers; JPSS Delrin Radius Rod Bushing Inserts, Sway Bars; Pegasus Aluminum Rear Cradle Bushings, Camber/Caster Plates; Z/28 Toe Links, Trailing Arms, Upper Control Arm Bushings, Rear Shock Mounts
|
|
|
|
|
|