02-20-2018, 02:33 PM | #1 |
ZL1 Dive planes (Canards)
We now have the ZL1 Dive planes for the 6th gen Camaro here at www.zl1addons.com, we have had many calls for them. No drilling of the fender, just 2 small 1/64 holes next to the grill.
|
|
02-20-2018, 03:12 PM | #2 | |
Drives: 2017 ZL1 Convertible A10 Join Date: Aug 2017
Location: San Gabriel, CA
Posts: 992
|
Quote:
only 5 left in stock now
__________________
'17 White ZL1 A10 Convertible - TM ported TB - RotoFab CAI - 2.3" griptech upper pulley - Kooks 1 7/8" Headers with High Flow Cats - Borla S-type Catback - Audio Overhaul - NavTV M650-GM - 20" BlackDiForza- Michelin Pilot Sport4S - Tuned at BRC Raceworks (606rwhp/675trq)
'14 CTS-V Coupe - ZL1 lid - Ported TB - Ported Snout - AirRad CAI - 8.66" lower - 2.55" upper- Greenbelt - SW Headers - SW Catback - Varimax Intercooler Pump - Track Attack Intercooler-Tuned at BRC Raceworks (551rwhp/516trq) '17 Maserati Levante- STOCK |
|
02-20-2018, 04:30 PM | #3 |
Drives: 2018 ZL1 Join Date: Sep 2012
Location: Houston,TX
Posts: 45
|
Is there any way to get them to match the gloss back on the zl1 vs the matte on the zl1 1le?
|
02-20-2018, 04:33 PM | #4 |
Drives: 2018 ZL1 Join Date: Nov 2013
Location: AZ
Posts: 67
|
I like! Are they as firm as the oem
__________________
|
02-20-2018, 06:41 PM | #5 |
02-20-2018, 06:43 PM | #6 |
02-20-2018, 06:47 PM | #7 |
Yes and they mount with upper brackets and lower very small holes that looks more like the factory OEM dive planes, so if you take them off you will not see any holes in the bumper but a very small 1/16 holes next to the grill. You can also not put the small holes and use blocks and not have the small holes.
|
|
02-20-2018, 07:03 PM | #8 |
Bring It
|
No way to get the lips on the outer edge?
__________________
2017 Camaro ZL1 M6 - Everything but the sunroof - Sold 2010 Camaro SS - 650RWHP Daily Driver - Traded |
|
|
Post Reply
|
|
|