06-27-2011, 06:59 AM | #1 |
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP Join Date: May 2009
Location: LS
Posts: 4,242
|
Anyone have DYI instruction for outer door weather strip / trim removal.
I'm trying to find a DYI or manual instruction for the outer door felt trim removal where the glass meets the door.
Its a black felt strip going from the mirror area, the length of the door. Does the interior door panel have to come off? http://www.camaro5.com/forums/showthread.php?t=153366
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
|
06-27-2011, 10:01 PM | #2 |
Banned
Drives: 2015 Camaro 1LT Join Date: May 2010
Location: Lansing, Michigan
Posts: 267
|
Front Side Door Window Belt Reveal Molding Outside.
1.Remove the inner door panel and the tweeter speaker. 2.Remove the 3 nuts that hold the outside mirror on the door. 3.Remove the fin trim to remove the sealing strip. 4.Pull the outer sealing strip up and away from the upper door flange. Hope this helps. DAVE |
06-28-2011, 10:28 AM | #3 |
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP Join Date: May 2009
Location: LS
Posts: 4,242
|
Thanks, but I think I invented my own way while waiting for a reply.
I just removed the one screw holding it in place, gently pulled the molding up about 1/4 inch until I got to the mirror area, then just slid it out. 5 minutes and I solved my problem. Showed the moldy strip to the dealer and they agreed to order me two new ones.
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
|
07-28-2016, 06:14 AM | #4 | |
Drives: 2013 Camaro SS Join Date: Jan 2016
Location: Bedford, United Kingdom
Posts: 492
|
Quote:
J |
|
03-28-2017, 02:01 AM | #5 |
Drives: 2012 Camaro SS Convert Join Date: Feb 2017
Location: Phoenix Arizona
Posts: 198
|
yeah def would be nice to know where this
"screw" is... I am thinking about replacing mine too |
|
|
|
|