Engine dress up site other than Phastek? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BlackMambaZL1 · 08-19-2018, 01:25 PM

I went to a cars and coffee yesterday and ran into some fellow ZL1 owners. I loved their cars as they were bone stock except CAI's but VERY VERY clean cars. One of them was even the coveted Blue Ray Metallic with Recaro's and all the other nice factory upgrades. They were very nice and look forward to seeing them again in the future. And I admired their resilience to the urges to mod their cars haha!

I have been doing a bunch of work to my engine and my compartment is trashed haha. It is crowded and dirty. The other cars were beautiful in their compartments and it made me not want to pop my hood.... and show off the 764 RWHP my car possesses. They had done a few nice things to make their engines look nice (Coolant res covers, wrapped strut brace towers ETC). Both of them kept buying from Phastek. I am not a fan of that company in the least. I am not going to get it but I have made it a point to never buy from them again.

I will say their selection is second to none. But, I can not find most of the stuff they offer on any other sites. My question is; is there anyone on here that is a rep for a company or know of a site that has clean looking, Black, billet engine dressup additions for ZL1's? Mainly needing a Fuse box cover, coolant cap, washer res cap, would like the vinyl ZL1 logo that goes on the bottom part of the hood, strut caps, dipstick cover and possibly a master cap.

Looking for clean, simple and durable haha.

Thank you in advance.

silversleeper · 08-19-2018, 01:58 PM

http://www.ebaystores.com/Pirate-Man...=p4634.c0.m322

txwaterfowler · 08-22-2018, 04:01 PM

Bought most of my under the hood stuff from Lupe ...

https://rivercitycreation.com/Camaro...ngine_c271.htm

HawkeyeZL1 · 08-22-2018, 05:12 PM

Quote:

Originally Posted by txwaterfowler

Bought most of my under the hood stuff from Lupe ...

https://rivercitycreation.com/Camaro...ngine_c271.htm

Bought my engine cover from them. A bit pricey but very nice.

Stewart · 08-22-2018, 08:36 PM

I saved a lot of money making the covers myself and painting everything else (ie: engine cover, strut bar etc)

BlackMambaZL1 · 08-23-2018, 09:16 AM

I like River City! I am looking for all Black stuff so I am not too sure about spending that much money... which is weird for me to say haha.

That is awesome work Stewart! I like it.

BlackMambaZL1 · 08-31-2018, 11:09 AM

Ordered the Pirate kit. Radiator cap does not clear the hood. I am sending it back to them. Sucks bc this stuff looks good and it is good quality.

DrkPhx · 09-02-2018, 01:37 PM

I ceramic coated the STB, strut covers, TB front accessory mounts, SC snout and valve cover, etc to keep the black theme going. I also painted the engine cover black to keep the OEM look going, but I only leave it installed when the car is stored for the winter.

CamaroDreams76 · 09-02-2018, 06:55 PM

http://showstopperaccessories.com/ca...and-Billet-Ca/

Stewart · 09-03-2018, 08:42 PM

Quote:

Originally Posted by BlackMambaZL1

I like River City! I am looking for all Black stuff so I am not too sure about spending that much money... which is weird for me to say haha.

That is awesome work Stewart! I like it.

Thank you.

Stewart · 09-03-2018, 08:43 PM

Quote:

Originally Posted by BlackMambaZL1

Ordered the Pirate kit. Radiator cap does not clear the hood. I am sending it back to them. Sucks bc this stuff looks good and it is good quality.

What is a pirate kit?

BlackMambaZL1 · 09-04-2018, 08:58 AM

The first person to respond to the post sent this link.

http://www.ebaystores.com/Pirate-Man...=p4634.c0.m322

Stewart · 09-06-2018, 03:41 AM

oh ok I did not see that before thank you

08-19-2018, 01:25 PM	#1
BlackMambaZL1 Drives: 2013 ZL1 Black Join Date: Jul 2015 Location: Boise, ID Posts: 68 View My Garage	Engine dress up site other than Phastek? I went to a cars and coffee yesterday and ran into some fellow ZL1 owners. I loved their cars as they were bone stock except CAI's but VERY VERY clean cars. One of them was even the coveted Blue Ray Metallic with Recaro's and all the other nice factory upgrades. They were very nice and look forward to seeing them again in the future. And I admired their resilience to the urges to mod their cars haha! I have been doing a bunch of work to my engine and my compartment is trashed haha. It is crowded and dirty. The other cars were beautiful in their compartments and it made me not want to pop my hood.... and show off the 764 RWHP my car possesses. They had done a few nice things to make their engines look nice (Coolant res covers, wrapped strut brace towers ETC). Both of them kept buying from Phastek. I am not a fan of that company in the least. I am not going to get it but I have made it a point to never buy from them again. I will say their selection is second to none. But, I can not find most of the stuff they offer on any other sites. My question is; is there anyone on here that is a rep for a company or know of a site that has clean looking, Black, billet engine dressup additions for ZL1's? Mainly needing a Fuse box cover, coolant cap, washer res cap, would like the vinyl ZL1 logo that goes on the bottom part of the hood, strut caps, dipstick cover and possibly a master cap. Looking for clean, simple and durable haha. Thank you in advance. __________________ 764RWHP on e85 683RWHP on 91. M6 Black on Black on Black. 1300ID's, DSX Aux Pump and Flex Fuel Sensor, Lingenfelter 2.5 upper 9.5 lower, 100MM idler, AFCO HX w/ FANS. 1 7/8"ARH exhaust to axle incl LTH, MF's, Fuel Lab FF, Lingenfelter ported snout and TB, Lingenfelter CAI, RotoFab coolant tank, NGK 2 steps colder spark plugs, Moroso catch can, BTR Stage III cam, crank case breather. Tuned by Power Labs in Idaho Falls, ID.

08-22-2018, 04:01 PM	#3
txwaterfowler Drives: 2013 Camaro ZL1 Convertible Join Date: May 2016 Location: Roman Forest, Tx Posts: 10 View My Garage	Bought most of my under the hood stuff from Lupe ... https://rivercitycreation.com/Camaro...ngine_c271.htm __________________ 1977 Camaro LT - Sold 2013 Camaro ZL1 Convertible

08-22-2018, 08:36 PM	#5
Stewart Drives: 2014 Camaro 2SS RS & Ground effects Join Date: Apr 2014 Location: Lower Desert Cali Posts: 1,229 View My Garage	I saved a lot of money making the covers myself and painting everything else (ie: engine cover, strut bar etc) Attached Images __________________ Don’t walk in front of me, I may not follow; Don’t walk behind me, I may not lead; Walk beside me, and just be my friend. MY BUILD LINK: http://www.camaro5.com/forums/showthread.php?t=484260

08-23-2018, 09:16 AM	#6
BlackMambaZL1 Drives: 2013 ZL1 Black Join Date: Jul 2015 Location: Boise, ID Posts: 68 View My Garage	I like River City! I am looking for all Black stuff so I am not too sure about spending that much money... which is weird for me to say haha. That is awesome work Stewart! I like it. __________________ 764RWHP on e85 683RWHP on 91. M6 Black on Black on Black. 1300ID's, DSX Aux Pump and Flex Fuel Sensor, Lingenfelter 2.5 upper 9.5 lower, 100MM idler, AFCO HX w/ FANS. 1 7/8"ARH exhaust to axle incl LTH, MF's, Fuel Lab FF, Lingenfelter ported snout and TB, Lingenfelter CAI, RotoFab coolant tank, NGK 2 steps colder spark plugs, Moroso catch can, BTR Stage III cam, crank case breather. Tuned by Power Labs in Idaho Falls, ID.

08-31-2018, 11:09 AM	#7
BlackMambaZL1 Drives: 2013 ZL1 Black Join Date: Jul 2015 Location: Boise, ID Posts: 68 View My Garage	Ordered the Pirate kit. Radiator cap does not clear the hood. I am sending it back to them. Sucks bc this stuff looks good and it is good quality. __________________ 764RWHP on e85 683RWHP on 91. M6 Black on Black on Black. 1300ID's, DSX Aux Pump and Flex Fuel Sensor, Lingenfelter 2.5 upper 9.5 lower, 100MM idler, AFCO HX w/ FANS. 1 7/8"ARH exhaust to axle incl LTH, MF's, Fuel Lab FF, Lingenfelter ported snout and TB, Lingenfelter CAI, RotoFab coolant tank, NGK 2 steps colder spark plugs, Moroso catch can, BTR Stage III cam, crank case breather. Tuned by Power Labs in Idaho Falls, ID.

08-19-2018, 01:58 PM	#2
silversleeper Big Crow Drives: '13 ZL1 Join Date: Mar 2017 Location: California Posts: 1,486	http://www.ebaystores.com/Pirate-Man...=p4634.c0.m322

09-02-2018, 01:37 PM	#8
DrkPhx Drives: 2013 Triple Black ZL1 / 2006 TB SS Join Date: Feb 2011 Location: MN Posts: 2,250	I ceramic coated the STB, strut covers, TB front accessory mounts, SC snout and valve cover, etc to keep the black theme going. I also painted the engine cover black to keep the OEM look going, but I only leave it installed when the car is stored for the winter. Attached Images

09-02-2018, 06:55 PM	#9
CamaroDreams76 Tri-County Camaro SWFL Drives: 2013 IOM 2SS/RS/1LE Join Date: Apr 2013 Location: South West FL Posts: 3,078 View My Garage	http://showstopperaccessories.com/ca...and-Billet-Ca/ __________________ Just bolt ons........ https://www.camaro5.com/forums/showthread.php?t=343023

09-04-2018, 08:58 AM	#12
BlackMambaZL1 Drives: 2013 ZL1 Black Join Date: Jul 2015 Location: Boise, ID Posts: 68 View My Garage	The first person to respond to the post sent this link. http://www.ebaystores.com/Pirate-Man...=p4634.c0.m322 __________________ 764RWHP on e85 683RWHP on 91. M6 Black on Black on Black. 1300ID's, DSX Aux Pump and Flex Fuel Sensor, Lingenfelter 2.5 upper 9.5 lower, 100MM idler, AFCO HX w/ FANS. 1 7/8"ARH exhaust to axle incl LTH, MF's, Fuel Lab FF, Lingenfelter ported snout and TB, Lingenfelter CAI, RotoFab coolant tank, NGK 2 steps colder spark plugs, Moroso catch can, BTR Stage III cam, crank case breather. Tuned by Power Labs in Idaho Falls, ID.

09-06-2018, 03:41 AM	#13
Stewart Drives: 2014 Camaro 2SS RS & Ground effects Join Date: Apr 2014 Location: Lower Desert Cali Posts: 1,229 View My Garage	oh ok I did not see that before thank you __________________ Don’t walk in front of me, I may not follow; Don’t walk behind me, I may not lead; Walk beside me, and just be my friend. MY BUILD LINK: http://www.camaro5.com/forums/showthread.php?t=484260