79 camaro z28 436sbc/4speed build.bright cobalt blue metallic

[BAD436Z28]

got a little more done on my subframe,got the crossmember and the center link painted.

By bad436z28 at 2012-04-20

By bad436z28 at 2012-04-20

[BAD436Z28]

got more of my engine bay painted today,the subframe is completely painted with new cast silver,also painted my swaybar and steering box daytona yellow,next i need to primer my firewall and innerfenders so i can start laying my cobalt bue metallic and i can finally start putting my engine in there.yahh!

By bad436z28 at 2012-04-24

By bad436z28 at 2012-04-24

By bad436z28 at 2012-04-24

[BAD436Z28]

spent morre ime working on my engine bay today,got the firewall all sanded down to 400 grit,and got the first coat of 2k primer all layed down,got a few spots i gotta mooth out then i can lay the last coat of primer.

By bad436z28 at 2012-04-25

By bad436z28 at 2012-04-25

[BAD436Z28]

spent morre ime working on my engine bay today,got the firewall all sanded down to 400 grit,and got the first coat of 2k primer all layed down,got a few spots i gotta mooth out then i can lay the last coat of primer.

By bad436z28 at 2012-04-25

By bad436z28 at 2012-04-25

[BAD436Z28]

well got the chance to work on my engine bay alittle today,got a few spots smoothed out that really needed it badly,and layed my last coats of primer down and wet sanded it with 600 then 800 grit,should be really smooth and not show any sanding scratches,its now ready for the cobalt blue,later today,cant wait to finally see some blue pant on my baby.

By bad436z28 at 2012-04-28

By bad436z28 at 2012-04-28

[xx_ED_xx]

Did someone say motion stripes..

[BAD436Z28]

yup,wow that car looks sweet i love them baldwin motion stripes my cars gonna be blue with silver balwin motion stripes.

[BAD436Z28]

got some more done on my engine bay today finally got some blue layed down couldnt wait any longer..LOL...so i fired up my heater this morning.that blue turned out beautiful the pictures dont do it any justice,its darker than in the pictures more of a midnight blue without the flash it looks black,and boy it sure does have some beautiful metallic.

By bad436z28

By bad436z28

By bad436z28

By bad436z28

[BAD436Z28]

got to work on my baby again tonight so i decide i might as well paint my door jams,so i sanded them all down with 600 then 800 wet sanding,and layed 3 coats of cbalt blue metallic then 2 coats of clearcoat,so now i can move onto my hood and fenders also need to be sanded and sprayed cobalt blue metallic,i will be dropping my engine in this week if everything goes as planned.and i can find a good 4 speed tranny for the right price.if not im just gonna go with a 350 turbo for now and collect all the parts for my tko 600 swap.

By bad436z28 at 2012-04-30

By bad436z28 at 2012-04-30

By bad436z28 at 2012-04-30

[BAD436Z28]

By bad436z28 at 2012-04-30

[WiSSDiver]

Looking good. Cant wait to see the power plant. 350 turbo tranny is a work horse. Ive had one in my 68 for about 15 years. Still going strong.

[BAD436Z28]

yeah them 350 turbos sre pretty tough probably the best tranny choice seein im making alot of power,dont think the 4 speeds would handle it well.

[BAD436Z28]

finally go to do a little work on my camaro tonight sanded the cowl all down with 400 grit paper then cleaned it really good with wax and grease remover,then layed my 2 coats of 2k primer.

By bad436z28

By bad436z28

[BAD436Z28]

ok so now i just sanded down my primer with 600 grit wet sand,then cleaned it really good with wax and grease remover,then i layed down 3 coats of cobalt blue metallic and 2 coats of clearcoat.

By bad436z28

By bad436z28

By bad436z28

By bad436z28