Lighted door sills for 1ss - Page 3

Hyper1SS · 07-26-2016, 05:09 AM

Quote:

Originally Posted by ender2664

Just so you know...
What I found annoying about the stock ones and why I changed them...if you have the lighting package in your car you pick what color your doors, footwell, dash, cup holders etc light up but the sills are the blue color regardless.
I always have red selected which is why I changed from the stock sills to the one I pasted the link too.

Ps- that hyper blue is a sexy color! Good choice!

I got you! That would be awesome if they changed to. Maybe Ofer can chime in and make it work where it would change colors as well. If not I am ok with blue because that is what I have mine set to mostly. Lol. Thanks I love the Hyper blue. Enjoy these beautiful rides

Mighunter · 07-28-2016, 07:33 AM

The thin piece of metal the forms the "C" in the illuminate door sill has come unglued and got bent. Anyone have this issue before? Going to have to get the dealer to replace that.

vm1971 · 09-24-2016, 10:32 AM

Quote:

Originally Posted by Mighunter

The thin piece of metal the forms the "C" in the illuminate door sill has come unglued and got bent. Anyone have this issue before? Going to have to get the dealer to replace that.

HEY!
taking delivery of my 2SS next week... after they fix / replace the same issue on both sides. did you have any lucky yet? wonder why or how it happened/happens? otherwise the car is tremendous. my 3rd SS since 2010... very psyched for pick up! Mosaic Black Metallic / Khalahari here.

Vince

Hyper1SS · 09-30-2016, 07:12 PM

Got my illuminated door sills today. Will be getting the instructions from my dealership to install.

BradfordCamaro · 09-30-2016, 07:47 PM

Quote:

Originally Posted by Hyper1SS

Got my illuminated door sills today. Will be getting the instructions from my dealership to install.

Nice.
Do a short install write up, nothing fancy. A few pics and a couple tips for those following.
If you get the service instructions for customer install throw those up too.

I know I ask so much....

Hyper1SS · 09-30-2016, 07:57 PM

Quote:

Originally Posted by BradfordCamaro

Nice.
Do a short install write up, nothing fancy. A few pics and a couple tips for those following.
If you get the service instructions for customer install throw those up too.

I know I ask so much....

I for sure will do.so.

Hyper1SS · 10-01-2016, 05:55 PM

Here is the GM instructions from my dealership.

Hyper1SS · 10-02-2016, 06:15 PM

Here is the DIY link for the install I did today.

http://www.camaro6.com/forums/showth...=1#post9340068

BradfordCamaro · 10-03-2016, 03:53 AM

Great Job. Thanks for taking the time to do the write up.

Hyper1SS · 10-03-2016, 07:48 AM

Quote:

Originally Posted by BradfordCamaro

Great Job. Thanks for taking the time to do the write up.

Thank you!! NP and your welcome

pjz1082 · 10-04-2016, 01:48 PM

Quote:

Originally Posted by Hyper1SS

Thank you!! NP and your welcome

How long did the install take?

Hyper1SS · 10-04-2016, 02:58 PM

Quote:

Originally Posted by pjz1082

How long did the install take?

With running the wire harness under the dash, splicing the wires together and clean up of the double sided tape then putting everything back together and hiding the wires and zip tieing them around 45 minutes.

pjz1082 · 10-14-2016, 04:03 PM

Quote:

Originally Posted by Hyper1SS

With running the wire harness under the dash, splicing the wires together and clean up of the double sided tape then putting everything back together and hiding the wires and zip tieing them around 45 minutes.

09-30-2016, 07:12 PM	#32
Hyper1SS Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016 Location: Indiana Posts: 891	Got my illuminated door sills today. Will be getting the instructions from my dealership to install. Attached Images __________________ 2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer

10-01-2016, 05:55 PM	#35
Hyper1SS Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016 Location: Indiana Posts: 891	Here is the GM instructions from my dealership. Attached Images __________________ 2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer

10-02-2016, 06:15 PM	#36
Hyper1SS Drives: 2016 Hyper Blue Metallic 1SS M6 NPP Join Date: Jan 2016 Location: Indiana Posts: 891	Here is the DIY link for the install I did today. http://www.camaro6.com/forums/showth...=1#post9340068 __________________ 2016 Hyper Blue Metallic 1SS M6 with body color hood vents, Silver broken 5 spoke wheels, NPP dual exhaust, Dark Night Interior Spectrum Lighting, Illuminated door sills plates. Upgrades include: Roto-Fab intake, Mishimoto catch can, MBRP cat-back Race exhaust, TSP 1 7/8 headers, EFI E85 Flex Fuel, MRR M017 graphite wheels with Nitto N555 G2 tires, Goodridge stainless steel brake lines, Powder coated Brembo calipers, BMR suspension, Eibach sport springs, Emblempros fender badges Order ID: TDHQMS 1100 on 01/07/2016 at Penske Chevrolet 6000 on 02/23/2016 Delivered to customer

10-03-2016, 03:53 AM	#37
BradfordCamaro SABIO Drives: 2016 CAMARO 1SS Join Date: Jul 2015 Location: Bradford, ON Posts: 5,012	Great Job. Thanks for taking the time to do the write up. __________________

07-28-2016, 07:33 AM	#30
Mighunter Drives: 2017 Summit White 2SS Join Date: Apr 2016 Location: Rhode Island Posts: 684	The thin piece of metal the forms the "C" in the illuminate door sill has come unglued and got bent. Anyone have this issue before? Going to have to get the dealer to replace that.

User Name		Remember Me?
Password