12-13-2012, 04:56 AM | #1 |
Drives: 87 iroc z28 67camaro 2013 zl1 Join Date: Nov 2012
Location: cranston ri
Posts: 12
|
anybody notice a lifter noise
hey guys i was wondering if anybody hears a ticking noise that seems louder on the drivers side of the engine when idling
|
12-13-2012, 05:35 AM | #2 |
ANGRY Z
Drives: 2015 Camaro ZL1 Join Date: May 2012
Location: Alberta, Canada
Posts: 1,406
|
|
12-13-2012, 07:11 AM | #3 |
Happy_Dan
|
Could it be the coupler?
|
12-13-2012, 07:26 AM | #4 |
Drives: 2013 ZL1 Ashen Gray / Manual Join Date: May 2012
Location: Wilmington NC
Posts: 208
|
|
12-13-2012, 07:32 AM | #5 |
aka Patrick
|
Ticking as in lifter tick? or like piston slap?
"ticking" is a very broad description. Does ticking speed up as you rev or only when Idle?
__________________
Current Modifications: Your average Bolt-ons & Suspension Upgrades
GForce Engineering: 9" Rear End, Strange Pro Iron Case w/Moser Nodular 3.70:1 Detroit locker, 3.5" Solid Drive Shaft |
12-13-2012, 07:40 AM | #6 |
Drives: '21 ZLE A10 Join Date: May 2012
Location: Mechanicsville, VA
Posts: 6,808
|
fuel injectors tick a little at idle...no worries unless it sounds deeper in the engine
__________________
'21 ZLE A10 Wild Cherry PDR 2:00.78 VIR Full 10.68@131.69 1.68 60'
'17 ZL1 A10 Mosaic Black PDR/Nav 2:03.08 VIR Full 11.003@129.2 1.75 (sold) '15 Z/28 #325 Black a/c & stereo. 2:10.1 VIR Full (sold) '12 ZL1 A6 Black 10.52@131 1.55 60' 2:13 VIR Full (sold) |
12-13-2012, 07:43 AM | #7 |
No Tags/Habitual Violator
Drives: 2012 SIM 2SS/RS & z71 Join Date: Sep 2011
Location: North Georgia
Posts: 2,379
|
|
12-13-2012, 08:36 AM | #8 |
Drives: '15 SS 1LE, '69 Z28 drag car Join Date: Dec 2009
Location: Mich
Posts: 4,482
|
Sometimes a better oil helps a bit. Try something like an Amsoil 10w30, and leave it 1/2 qt low.
I know 5w30 Mobil 1 can sometimes be noisy in these LS engines. Mostly I think it is variation in lifter to lifter bore fit. And some oil pressure variation. Oil pump variation... If you were hand building an engine, ideally you'd want to perfect that lifter to lifter bore fit with precision machining and lifter select matching to the bore. In mass production though, there is variation and slop. Get one that fits a bit loose, and that lifter can be a bit noisy as it bleeds off oil pressure. Harleys can have the exact same issue... some have noisy lifters some don't. Build an HD motor up with perfect lifter/bore fit, a better oil pump, and leave the sump a hair low... and it will be a pretty quiet valvetrain. But if you ride 10 mass produced ones, all 10 will probably sound a bit different. |
12-13-2012, 08:50 AM | #9 |
Drives: 2016 2SS, 2011 RS (past) Join Date: Aug 2011
Location: The Central Coast
Posts: 909
|
I hear so many weird noises with this car haha...just last night there was an odd noise coming from the back, then a weird noise from the front left wheel while going 3 mph....I just try to ignore them all
__________________
Past: 2011 RS, 2013 ZL1 Current: 2016 2SS |
12-13-2012, 09:40 AM | #10 |
ANGRY Z
Drives: 2015 Camaro ZL1 Join Date: May 2012
Location: Alberta, Canada
Posts: 1,406
|
|
12-13-2012, 11:48 AM | #11 | |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
Quote:
Brandon Chevrolet Customer Service
__________________
For information on the GM Privacy Statement, please visit http://www.gm.com/privacy-statement.html
|
|
12-13-2012, 11:58 AM | #12 |
Drives: 2013 red Lingenfelter ZL1 Join Date: Apr 2012
Location: zionsville IN
Posts: 567
|
It's likely fuel injectors. Not just my opinion but the word of a machanic at the dealership. I heard this on my last two corvette's and even the viper I owned.
|
12-13-2012, 12:06 PM | #13 |
Drives: 2013 ZL1 Join Date: Oct 2011
Location: tangent or
Posts: 2,984
|
my .02 is fuel injectors or coupler. every car will tick with the hood up. you just have to diagnose wheather it is normal or an issue.
Buy a stethoscope it will amplify any issue if there is an issue.
__________________
shopping for 2017+1le or zl1
2009 CTS-V -sold 2015 Hellcat-sold 2013 ZL1 -sold 2007 Z06- sold 2014 Chrysler 300 2011 Duramax 8" lift, deleted tuned |
12-13-2012, 12:47 PM | #14 |
Drives: 2016 SS, BLACK, MANUAL Join Date: Apr 2010
Location: pittsburgh, pa
Posts: 277
|
Sorry, but just bought my ZL1 today but which coupler are you talking about??
__________________
2016 Black/Black SS, 6speed, MRC, Roto-Fab air intake, Vitesse controller,
1 7/8" headers and exhaust from Stainless Works complete with nonNPP mufflers and 5"outlets, Katech ported TB, Moroso catch can, MRR M017 polished powder wheels, Eibach lowering springs, and BMR upper/ lower trailing arms and upper control arms. ZL1/1le sway bars and Magnusson Supercharger with Jannetty tune. Stay Tuned!!!......More to come. 2014 Camaro Ashen grey, 3.6, 6 speed, Vararam intake, Elite catch can, chrome wheels, and Vitesse controller. 2003 SSR red, 2016 Vette |
|
|
|
|