how does the interior trim come out and doors too - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Ukd73 · 11-07-2009, 04:14 PM

I found some yellow inserts to go in the dash of my 1ss and also has door panels. My question is are the inserts glued in and the doors snapped on? I dont have my car yet or I could answer my own question but I am patiently waiting
thanks

Indpowr · 11-07-2009, 04:24 PM

Plastic rivets

Ukd73 · 11-08-2009, 03:12 PM

thanks

KMPrenger · 12-27-2009, 12:53 PM

Is there a DIY on this anywhere? I didn't have much luck finding one if there is.

For those that have done this, or at least have an idea how to do it...does the entire door panel have to be removed for these trim pieces to come off as well or can they be removed by themselves??

Ive read they are plastic riveted in, but I don't know much else, like where these rivets are located or how to get to them.

Any info would be appreciated. Thanks!

herkman · 12-27-2009, 05:46 PM

Where did you find the inserts? Are other colors available yet?

wer2foxs · 12-27-2009, 06:40 PM

here is a tread on how its done and the results.

http://www.camaro5.com/forums/showthread.php?t=46651

Where did you get the yellow inserts?

11-07-2009, 04:14 PM	#1
Ukd73 Drives: 2010 1ss/rs Ls3 Join Date: Oct 2009 Location: Kentucky Posts: 99	how does the interior trim come out and doors too I found some yellow inserts to go in the dash of my 1ss and also has door panels. My question is are the inserts glued in and the doors snapped on? I dont have my car yet or I could answer my own question but I am patiently waiting thanks

12-27-2009, 12:53 PM	#4
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	Is there a DIY on this anywhere? I didn't have much luck finding one if there is. For those that have done this, or at least have an idea how to do it...does the entire door panel have to be removed for these trim pieces to come off as well or can they be removed by themselves?? Ive read they are plastic riveted in, but I don't know much else, like where these rivets are located or how to get to them. Any info would be appreciated. Thanks! __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

12-27-2009, 05:46 PM	#5
herkman Drives: 2010 IOM SS/RS, 69 Camaro Join Date: Nov 2008 Location: Douglasville, Georgia Posts: 563	Where did you find the inserts? Are other colors available yet? __________________ R6P - Kooks 1-7/8 Catted LT Headers, Roto-Fab CAI, MGW Shifter, Revolution SS Front Spoiler, Unrestricted Motorsports Rear Spoiler, Razzi Side and Rear EFX, Heritage Grill, Hawk HPS Pads, G2 Matched Calipers, SAV-3 Wheels, Vengeance Racing Stage II Cam 227/239.614/.624 115+3, 25% Underdrive Pulley, Oil Catch Can, 461 RWHP - 420 Torque

11-07-2009, 04:24 PM	#2
Indpowr Account Suspended Drives: Corvette C6 Join Date: May 2008 Location: Florida Posts: 6,959 View My Garage	Plastic rivets

11-08-2009, 03:12 PM	#3
Ukd73 Drives: 2010 1ss/rs Ls3 Join Date: Oct 2009 Location: Kentucky Posts: 99	thanks

12-27-2009, 06:40 PM	#6
wer2foxs Drives: 2010 VR SS Join Date: Sep 2009 Location: Indianapolis, IN Posts: 722	here is a tread on how its done and the results. http://www.camaro5.com/forums/showthread.php?t=46651 Where did you get the yellow inserts?