Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
dave@hennessey
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Regional Forums > USA - Southeast


Reply
 
Thread Tools
Old 01-24-2010, 02:00 PM   #1
Meister@Torq

 
Drives: 2001 Crown Vic
Join Date: Oct 2009
Location: Miami
Posts: 974
Send a message via AIM to Meister@Torq Send a message via MSN to Meister@Torq
Torq - South Florida's #1 Camaro Destination - ONE STOP SHOP

Inside Torq
No other company can offer all of the the services we provide under one roof in addition to unparalleled technical and tuning experience. A combined 15 years in the performance parts and tuning business and a combined 30+ years in performance maintenance and installations we are your GM and Camaro source.

Torq is a full-service, performance-oriented facility that offers enthusiasts all of the necessary services under one roof in our 4700sqft Miramar facility. Torq sells quality parts and provides unparalleled service that combine to generate significant results for our customers. Torq brings a new philosophy to an old school industry that is rapidly changing with the introduction of computers. Torq consists of two guys with a unique passion for cars and racing combined with an international perspective on performance. Paul Meister, "EFI" tuner and founder of Torq, as well as Erik Cederberg, American born, part Swede, part Irish and with an extreme passion for racing brings his knowledge of chassis setup, road racing and customer service to Torq. Combining our experience with Electronic Fuel Injection systems (SCT Advanced Certified), internal combustion engines and our specialized understanding if performance and racing, Torq will provide quality service that creates power and TORQ you never imagined possible and performance that is reliable. Torq’s drive for power and performance is backed by a combined 15 years of racing, tuning and installation / repair experience.

Muscle Card – Rewards Program
Torq’s Muscle CardTM lets you earn rewards points as you purchase products or services in store and online in addition to our in-house services such as maintenance, installations and tuning! Additionally you’ll enjoy a discount on every service/item we sell.

• Absolutely Free!
• Earn Points on all Products and Service
• Redeem Points on-line or in-store!
• Special Membership Pricing & Discounts!
• View, Manage and Track rewards online!
• Earn 1 point for every $100 purchased
• Each point is redeemable for $1.00 off parts and services

Parts Department, Customer Lounge/Business Center
Torq has tried nearly every performance product on the market and has the knowledge and experience to find the right combination of parts that will give you the most power and TORQ from your ride. Torq has the ability to source specific products and can deliver them fast, directly to your door. If there is a specific product or accessory you are interested in, chances are we have it in stock, if not we can get it to you right away through our vast network of suppliers. We offer everything from performance add-ons to dress-up items, wheel and tire packages and knowledgeable advice.

The first thing the customers will see as they walk through our entrance, is a showroom second to none including a stainless steel parts counter, Italian tile floor and a showcase of Torq’s Performance Packages and other parts and services the we provide via digital media and folders.

In our lounge area customers can sit in a relaxed and comfortable environment and watch TV or their car being tuned on our flat screen TV, check email/browse the internet (free Wi-Fi) or just hang out and read one a magazine.



Service/Installation Department
Torq offers high quality professional installation for all of the performance parts and accessories we sell. Additionally, we perform general repairs and offer factory routine maintenance in addition to performance maintenance packages to keep your modified vehicle running at its best. Torq’s state-of-the-art facility is equipped with the latest in diagnostic and repair equipment to ensure your vehicle performs at its best after being serviced. All installations will receive complementary before and after dyno runs to verify and record power gains.


Our Lead Technician, is a certified ASE Technician with over 24yrs experience in the automotive service industry specializing in electrical and diagnostics, engine repair and engine performance. His resume includes working at Ford where he earned many awards and certificates for his outstanding achievement in Noise, Vibration, & Harshness Diagnostics (NVH), and Electronic Systems Diagnosis.


Tuning
Torq offers custom tuning for Mustangs, and other Ford vehicles equipped with SCT or Diablosport flash devices or chips. GM custom tuning is available using SCT, EFI Live and HP Tuners.
Torq is more than a Wide Open Throttle (WOT) tuner. We have the capability to hand-tune your vehicle with a focus on safety and drivability. There is much more too tuning than finding the highest horsepower and ‘Torq’ number at WOT - it should be just one consideration of many.
Paul Meister, EFI Calibrator (and Managing Member) at Torq, has been at the forefront of providing stock-like drivability for high performance vehicles since 2003 while employed at a domestic performance facility in Toronto, Ontario, Canada. Paul was the shop’s only Calibrator and his quality work helped his former employer become the largest SCT tuner / distributor in Canada and among the top 10 in North America. Additionally, Paul is among a select few that hold SCT Advanced level certifications, EFI 101, and Advanced EFI certificates in addition to being a beta tester for many new tuning technologies. Paul’s experience has taken him all over the world as customers have sought him out and flown Paul to places like Sweden to tune vehicles that other shops couldn’t.
Torq has proprietary data logging equipment and we perform our tuning with OEM lab quality wideband air fuel modules on our MD 1100SE (Single Eddy Current) Dyno to ensure perfect drivability and the safest, most reliable tune possible. Other shops simply use tailpipe ‘sniffers’, and low quality data logging equipment. If you have a heavily modified car, there are usually big power gains and drivability improvements that can be realized by having your car tuned. Utilizing our in house Mustang Dyno 1100SE, with load control, steady state control and an abundance of advanced features offered by Mustang Dyne, we have the ability to simulate real world conditions without ever leaving the shop. Our dyno is located in a controlled environment, enclosed test cell which ensures accuracy and repeatability each and every time. The test cell reduces noise by 50%, removes heat and unwanted exhaust via a 35,000cfm fan and draws in fresh outside air from multiple squirrel cage fans that simulate the pressure of over 50MPH.
[IMG][/IMG]

For more information please visit www.gettorq.com, e-mail info@gettorq.com or call 866-870-TORQ/954-251-2110. Please note we are switching servers and the website will be relaunched at the end of the week.

You can also follow us on Facebook (http://www.facebook.com/pages/Torq/6...ewas=612873505) and Twitter (http://twitter.com/torqspeedlab). We run weekly/monthly contests that can earn customers free products, free tuning and installations.

For additional information, hours of operation, technical information, videos, pictures, showcases please visit our website Torq - South Florida's #1 Destination for Camaro Parts, Camaro Tuning, and Camaro Service

11952 Miramar Parkway
Miramar, FL
33025
954-251-2110
877-870-TORQ


For those who have been following us, we had a showcased photo shoot on Camaro 5 and I will post some pictures of our RECENT Camaro upgrades.

Our 2010 SS - Built and Tuned in house (featured at PRI and next month in GM High Tech Performance)
497RWHP, 11.4 1/4 Mile, 164MPH in the standing mile, tons of road course testing, and SCT, and Pfadt Racing and many more preferred installer:
Torq 2010 Camaro Stage 5 Dyno Video




Wolfgang's 2010 SS - Getting flashed before being sent to Germany:



Our short shifter being installed in Gary's Camaro:


Burt's 2010 2LT, Eibach Spring Install:


John's 2010 SS, Torq Stage 2 Handling Pack (Pfadt Spring and Swaybars)
Meister@Torq is offline   Reply With Quote
Old 01-31-2010, 10:47 PM   #2
Meister@Torq

 
Drives: 2001 Crown Vic
Join Date: Oct 2009
Location: Miami
Posts: 974
Send a message via AIM to Meister@Torq Send a message via MSN to Meister@Torq
bump to the top!
Meister@Torq is offline   Reply With Quote
Old 02-02-2010, 07:13 PM   #3
Booneabal
 
Drives: 2LT RS Rally Yellow
Join Date: Nov 2009
Location: Miami, FL
Posts: 136
Nice, I am right at the end of the Miramar Parkway so I will check you when I have a minute.
Booneabal is offline   Reply With Quote
Old 02-02-2010, 07:24 PM   #4
1bacamaro
 
1bacamaro's Avatar
 
Drives: 2ss
Join Date: Nov 2009
Location: naples florida
Posts: 432
great guys! i have been talking to eric for about a month now about the mods that fit my plans for the car. worked out a good list of mods and great price. should see my stuff by friday. thanks eric will come see you guys in the future for my cam!
1bacamaro is offline   Reply With Quote
Old 02-03-2010, 09:07 PM   #5
Monaco
 
Drives: 2012 SS Camaro LS3
Join Date: Feb 2010
Location: Homestead, Florida
Posts: 42
hey saw you guys at a small event in Homestead at Home Depot (lol I was one of the martial arts guys) your Camaro looked and sounded amazing! I want those rims, too!
Monaco is offline   Reply With Quote
Old 02-04-2010, 07:55 AM   #6
Meister@Torq

 
Drives: 2001 Crown Vic
Join Date: Oct 2009
Location: Miami
Posts: 974
Send a message via AIM to Meister@Torq Send a message via MSN to Meister@Torq
Thanks for all of the comments guys. We have another SICK build getting ready to come in shortly. L99 Head, Cam, Exhaust package with out CUSTOM CNC heads and CUSTOM Camshaft specifically for L99 street applications
Meister@Torq is offline   Reply With Quote
Old 02-05-2010, 07:29 PM   #7
PatrickfromMD
 
PatrickfromMD's Avatar
 
Drives: Buick Enclave/Corvette/2010 Camaro
Join Date: Aug 2008
Location: Maryland
Posts: 421
Quote:
Originally Posted by Meister@Torq View Post
Thanks for all of the comments guys. We have another SICK build getting ready to come in shortly. L99 Head, Cam, Exhaust package with out CUSTOM CNC heads and CUSTOM Camshaft specifically for L99 street applications
Does your cam retain the VVT and/or DOD?
__________________

***56K miles and still going strong***
2SS/RS IOM ext w/cyber grey stripes, tinted windows, IO int Auto
ProTorque prototype Converter, Chuck Mosello of Westchester Corvettes Custom Tune
T&T installed SLP Longtubes, Powerflow X Pipe, and Powerflow axle back
JL 10W3 in custom side sub box, new door tweeters, Alpine 5ch 600 watt
T&T configured ACS front Fascia w/ heritage grill, splitter, dual color halos, , led markers, taillight bezels , all accented in CGM
Gary Custom Z vented fenders. Vararam ver 2
PatrickfromMD is offline   Reply With Quote
Old 02-06-2010, 03:24 PM   #8
Meister@Torq

 
Drives: 2001 Crown Vic
Join Date: Oct 2009
Location: Miami
Posts: 974
Send a message via AIM to Meister@Torq Send a message via MSN to Meister@Torq
We offer cams that KEEP the VVT and required phasers and we also offer a delete kit. When we sell the cams with the VVT in tact and the phasers we suggest the customer (if mail order) bring the car to us or to make sure their tuner has a great understand of the systems because it can be very tricky to get right
Meister@Torq is offline   Reply With Quote
Old 06-03-2010, 06:57 PM   #9
xavier02832
 
xavier02832's Avatar
 
Drives: 13 ZL1-SOLD, 13 GT500-Sold
Join Date: Jan 2010
Location: Sunrise
Posts: 450
need some info on your camaro packages

Interested the different packages you guys offer for the 2010 camaro. I already have a corsa cat back and im now interested in some headers, possibly a cam, and a tune.
xavier02832 is offline   Reply With Quote
Old 06-09-2010, 04:38 PM   #10
xpanda305x
Banned
 
Drives: Dark Knight
Join Date: Nov 2009
Location: Gunshine State
Posts: 3,150
hoping to pass by one day...

how much to tune a v6? and how much to just dyno it to see how much rwhp/tqft im making?
xpanda305x is offline   Reply With Quote
Old 06-20-2010, 01:33 PM   #11
Meister@Torq

 
Drives: 2001 Crown Vic
Join Date: Oct 2009
Location: Miami
Posts: 974
Send a message via AIM to Meister@Torq Send a message via MSN to Meister@Torq
Please contact us directly about our packages and tuning services.

954-251-2110
Meister@Torq is offline   Reply With Quote
Old 06-23-2010, 07:31 AM   #12
Erik@Torq
 
Erik@Torq's Avatar
 
Drives: '10 SS + '04 Z16 Z06 S/C
Join Date: Jan 2009
Location: Miramar, FL
Posts: 1,196
Send a message via MSN to Erik@Torq
I would just like to bump this thread and let everybody now that TORQ is now an official sponsor of Camaro 5!

We look forward to helping everybody out with all their tuning and performance needs. You won't find a shop here in the SE with as much hands-on experience with the new 5th Gen Camaro, we have racked up over 11K miles and many hours on the dyno with our shop Camaro to date and have many more to come.

Happy to be aboard!

/Erik@Torq
Erik@Torq is offline   Reply With Quote
Old 02-07-2011, 03:45 PM   #13
thebeast916

 
Drives: Blown G8 GT
Join Date: Apr 2010
Location: Orlando, FL
Posts: 782
do you guys have any experience with the pontiac g8 with the 6.0 l76 with afm and dod. Id like to do a cam swap and maybe a supercharger.
thebeast916 is offline   Reply With Quote
Old 02-07-2011, 04:35 PM   #14
Erik@Torq
 
Erik@Torq's Avatar
 
Drives: '10 SS + '04 Z16 Z06 S/C
Join Date: Jan 2009
Location: Miramar, FL
Posts: 1,196
Send a message via MSN to Erik@Torq
Quote:
Originally Posted by thebeast916 View Post
do you guys have any experience with the pontiac g8 with the 6.0 l76 with afm and dod. Id like to do a cam swap and maybe a supercharger.
Yes Sir we most certainly do. Give us a call at the shop and we can discuss your options!

/Erik@Torq

877-870-TORQ
Erik@Torq is offline   Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Does the v6 have enough power? cstproductions Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 305 08-29-2012 09:27 PM
Camaro Product Manager - interview Moose 5th Gen Camaro SS LS LT General Discussions 11 04-04-2012 06:10 PM
GM memo to dealers Moose 5th Gen Camaro SS LS LT General Discussions 41 02-04-2010 07:33 PM
Official Camaro Convertible CONCEPT Press Release Tran Camaro Convertible Forum 12 11-18-2009 07:05 PM


All times are GMT -5. The time now is 07:26 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.