*SOLD* New Style SLP TVS2300 Supercharger

[ChaosActual]

Fits 2010-2015 Camaro

Only removed because I am trading in the car. Runs great with no problems whatsoever. Upgraded ARP pulley bolts, a brand new dual pass intercooler that I hadn’t even installed yet, and LSA 56lb injectors. Includes the original installation instruction book and all parts are organized in bags with part numbers written on them. Super easy installation.

Would absolutely prefer local pickup however I can ship or deliver at the buyers expense.

Asking $4,500. Price is FIRM

Note: Didn’t think I’d need to mention this but yes, tuning is required to run boost..

[96SS390]

Did you run this with a cam?

Also I missed out on the Catch Can on FB :/

[ChaosActual]

Originally Posted by 96SS390

Did you run this with a cam?

Also I missed out on the Catch Can on FB :/

I did. BTR Custom Grind Camshaft 227/234 .614"/.576" 113+2 on a Cam Motion Core It was a torque monster.

[96SS390]

Originally Posted by ChaosActual

I did. BTR Custom Grind Camshaft 227/234 .614"/.576" 113+2 on a Cam Motion Core It was a torque monster.

Is that a NA Cam??

I am interested just little on the fence as install won't be till next year. Do you have the full set of pulleys? What else would I need for install?

Jared

[ThomasLeT]

Just by looking at your photos, this looks like a complete kit.
Is there anything missing? Or anything separate that would need to be sourced to install? (I'm referring to things like pulleys, or intercooler pump,etc.... not tune or fuel pump related)

Thanks,

[ChaosActual]

Originally Posted by ThomasLeT

Just by looking at your photos, this looks like a complete kit.
Is there anything missing? Or anything separate that would need to be sourced to install? (I'm referring to things like pulleys, or intercooler pump,etc.... not tune or fuel pump related)

Thanks,

Everything needed for install will be included. It has all pulleys and brackets required, and even comes with a selection of belt sizes depending on your cars year and factory pulley setup. Also has intercooler pump and all bolts, washers, wiring, etc. The only thing not included will be a tune.

[ChaosActual]

Originally Posted by 96SS390

Is that a NA Cam??

I am interested just little on the fence as install won't be till next year. Do you have the full set of pulleys? What else would I need for install?

Jared

Yes, I ran it with a N/A cam for increased torque and compensated for boost loss with a smaller pulley. I was making 12-13psi boost on a 3” 8 rib pulley. It has everything needed for installation. You’ll just need a tune and you’ll be set to go.

[ChaosActual]

Edit: still available.

[96SS390]

Originally Posted by ChaosActual

*PENDING SALE*

Dam...lemme know if it falls through.

[ChaosActual]

Originally Posted by 96SS390

Dam...lemme know if it falls through.

Funny that you mention that. I woke up to a text of somebody canceling. Still available.

[ChaosActual]

Sold!