06-07-2017, 11:45 AM | #1 |
Drives: 2013-ZL1, 69-Z28, 71-CHEVELLE SS Join Date: Oct 2016
Location: South Jersey
Posts: 268
|
9.55 Lower pulley belt size
I have a 9.55 lower pulley with stock upper and lingenfelter relocation bracket.
Belt size on the chart calls for K080685 and I installed it and there is no slack at all on the tensioner, very tight. Anyone else use this belt?
__________________
2017 C7 Z06
2013-ZL1 2017 HELLCAT SOLD 2019 HELLCAT REDEYE WB 69-Z28, LSA SWAP, T56 MAGNUM 71-CHEVELLE SS, 496 STROKER TH400 |
06-07-2017, 04:27 PM | #2 |
ZL1 Pilot
|
I have found the lingenfelter belt chart totally useless when it comes to belt sizes. It was no where close when I did a 9.55 lower. You will just have to figure out which length works. I ended up using a K080702.
__________________
GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
06-07-2017, 05:07 PM | #3 |
Drives: 2013-ZL1, 69-Z28, 71-CHEVELLE SS Join Date: Oct 2016
Location: South Jersey
Posts: 268
|
The chart floating around on this site is where I got the belt info K080685 for 9.55 and stock upper
I just found the same chart with the LINGENFELTER name on it and it calls for a different belt K080690 looks like it's 1/2" bigger
__________________
2017 C7 Z06
2013-ZL1 2017 HELLCAT SOLD 2019 HELLCAT REDEYE WB 69-Z28, LSA SWAP, T56 MAGNUM 71-CHEVELLE SS, 496 STROKER TH400 |
06-07-2017, 05:31 PM | #4 |
Drives: ZL1, 2013, tri-coat-red, manual Join Date: Nov 2013
Location: Michigan
Posts: 1,607
|
I Ran into this also and found out the chart has been updated.
|
06-07-2017, 05:52 PM | #5 |
ZL1 Pilot
|
The update is still wrong. For me anyway. The chart should have a disclaimer to say approximate.
__________________
GP Tuning 2.5 Cam, RPS Carbon Twin Clutch, Ported Blower, Kook's Headers, Cold Air Inductions CAI, ID850's, 9.17 Lower, 2.5 Upper, JMS BAP, Pedders Front Radius Arm Inserts, Whiteline Subframe Inserts, Tuned by me with HP Tuners Idle Clip Link...........https://www.youtube.com/watch?v=gTL8S9eHwbs |
|
|
|
|