07-09-2020, 11:27 AM | #1 |
Drives: Chevy Camaro SS 1LE Join Date: Apr 2019
Location: Iowa
Posts: 12
|
NW 103 TB
Currently have 700whp with whipple supercharger . Thinking about ordering nw tb. Will this fit my k&n cai? Currently have a stock tb .What hp gains might I see?
__________________
2.9 whipple, 3.875 pulley, BTR stage 4 pds cam, k&n cai, Kooks 1 7/8 LT headers, Corsa Xtreme 3" catback, mgw shifter, BMR 1.25 springs, ATI super damper, E85, DSX fuel pump and sensor, 127lb injectors
|
07-09-2020, 02:36 PM | #2 |
Drives: 2011 Camaro 2SS LS3 Whipple Join Date: May 2019
Location: Connecticut
Posts: 1,925
|
I was told about 15WHP with a 102NW and a tune. I don't think you need to change the air ducts the inside is larger not the outside. I could be wrong tho.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
|
07-10-2020, 09:03 PM | #3 |
|
You will need a bigger rubber/silicone coupler to go from your CAI to the 102mm (4") TB. Stock TB is about 3.5".
|
07-11-2020, 11:36 PM | #4 |
Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010
Location: Atlanta, GA
Posts: 499
|
Also will need the 102mm throttle body adapter that whipple sells.
|
07-21-2020, 02:13 PM | #5 | |
|
Quote:
-Scott |
|
07-21-2020, 07:00 PM | #6 |
Drives: 2010 VR 2SS/RS M6 Camaro Join Date: Feb 2010
Location: Atlanta, GA
Posts: 499
|
Ya I was talking about that plastic adapter, they make one for 102mm throttle bodies. I guess the stock one fits too but airflow is probably better with the larger one.
|
|
|
|
|